10 C.F.R. § 32.102 Schedule C—prototype tests for calibration or reference sources containing americium-241.
Title 10 - Energy
An applicant for a license pursuant to §32.57 shall, for any type of source which is designed to contain more than 0.005 microcurie of americium-241, conduct prototype tests, in the order listed, on each of five prototypes of such source, which contains more than 0.005 microcurie of americium-241, as follows: (a) Initial measurement. The quantity of radioactive material deposited on the source shall be measured by direct counting of the source. (b) Dry wipe test. The entire radioactive surface of the source shall be wiped with filter paper with the application of moderate finger pressure. Removal of radioactive material from the source shall be determined by measuring the radioactivity on the filter paper or by direct measurement of the radioactivity on the source following the dry wipe. (c) Wet wipe test. The entire radioactive surface of the source shall be wiped with filter paper, moistened with water, with the application of moderate finger pressure. Removal of radioactive material from the source shall be determined by measuring the radioactivity on the filter paper after it has dried or by direct measurement of the radioactivity on the source following the wet wipe. (d) Water soak test. The source shall be immersed in water at room temperature for a period of 24 consecutive hours. The source shall then be removed from the water. Removal of radioactive material from the source shall be determined by direct measurement of the radioactivity on the source after it has dried or by measuring the radioactivity in the residue obtained by evaporation of the water in which the source was immersed. (e) Dry wipe test. On completion of the preceding test in this section, the dry wipe test described in paragraph (b) of this section shall be repeated. (f) Observations. Removal of more than 0.005 microcurie of radioactivity in any test prescribed by this section shall be cause for rejection of the source design. Results of prototype tests submitted to the Commission shall be given in terms of radioactivity in microcuries and percent of removal from the total amount of radioactive material deposited on the source. [30 FR 8192, June 26, 1965, as amended at 31 FR 15145, Dec. 2, 1966]
Title 10: Energy
PART 32—SPECIFIC DOMESTIC LICENSES TO MANUFACTURE OR TRANSFER CERTAIN ITEMS CONTAINING BYPRODUCT MATERIAL
Subpart B—Generally Licensed Items
§ 32.102 Schedule C—prototype tests for calibration or reference sources containing americium-241.
