10 C.F.R. Subpart B—Specific Licensing Requirements
Title 10 - Energy
A person, as defined in §30.4 of this chapter, may file an application for a specific license authorizing the use of sealed sources in an irradiator on Form NRC 313, “Application for Material License.” Each application for a license, other than a license exempted from part 170 of this chapter, must be accompanied by the fee prescribed in §170.31 of this chapter. The application and one copy must be sent to the appropriate NRC Regional Office listed in appendix D to part 20 of this chapter. The Commission will approve an application for a specific license for the use of licensed material in an irradiator if the applicant meets the requirements contained in this section. (a) The applicant shall satisfy the general requirements specified in §30.33 of this chapter and the requirements contained in this part. (b) The application must describe the training provided to irradiator operators including— (1) Classroom training; (2) On-the-job or simulator training; (3) Safety reviews; (4) Means employed by the applicant to test each operator's understanding of the Commission's regulations and licensing requirements and the irradiator operating and emergency procedures; and (5) Minimum training and experience of personnel who may provide training. (c) The application must include an outline of the written operating and emergency procedures listed in §36.53 that describes the radiation safety aspects of the procedures. (d) The application must describe the organizational structure for managing the irradiator, specifically the radiation safety responsibilities and authorities of the radiation safety officer and those management personnel who have important radiation safety responsibilities or authorities. In particular, the application must specify who, within the management structure, has the authority to stop unsafe operations. The application must also describe the training and experience required for the position of radiation safety officer. (e) The application must include a description of the access control systems required by §36.23, the radiation monitors required by §36.29, the method of detecting leaking sources required by §36.59 including the sensitivity of the method, and a diagram of the facility that shows the locations of all required interlocks and radiation monitors. (f) If the applicant intends to perform leak testing of dry-source-storage sealed sources, the applicant shall establish procedures for leak testing and submit a description of these procedures to the Commission. The description must include the— (1) Instruments to be used; (2) Methods of performing the analysis; and (3) Pertinent experience of the individual who analyzes the samples. (g) If licensee personnel are to load or unload sources, the applicant shall describe the qualifications and training of the personnel and the procedures to be used. If the applicant intends to contract for source loading or unloading at its facility, the loading or unloading must be done by an organization specifically authorized by the Commission or an Agreement State to load or unload irradiator sources. (h) The applicant shall describe the inspection and maintenance checks, including the frequency of the checks required by §36.61. The applicant may not begin construction of a new irradiator prior to the submission to NRC of both an application for a license for the irradiator and the fee required by §170.31. As used in this section, the term “construction” includes the construction of any portion of the permanent irradiator structure on the site but does not include: Engineering and design work, purchase of a site, site surveys or soil testing, site preparation, site excavation, construction of warehouse or auxiliary structures, and other similar tasks. Any activities undertaken prior to the issuance of a license are entirely at the risk of the applicant and have no bearing on the issuance of a license with respect to the requirements of the Atomic Energy Act of 1954, as amended, and rules, regulations, and orders issued under the Act. (a) The Commission may, upon application of any interested person or upon its own initiative, grant any exemptions from the requirements in this part that it determines are authorized by law and will not endanger life or property or the common defense and security and are otherwise in the public interest. (b) Any application for a license or for amendment of a license authorizing use of a teletherapy-type unit for irradiation of materials or objects may include proposed alternatives for the requirements of this part. The Commission will approve the proposed alternatives if the applicant provides adequate rationale for the proposed alternatives and demonstrates that they are likely to provide an adequate level of safety for workers and the public. (a) After the filing of the original application, the Commission may request further information necessary to enable the Commission to determine whether the application should be granted or denied. (b) Each license is issued with the condition that the licensee will, at any time before expiration of the license, upon the Commission's request, submit written statements to enable the Commission to determine whether the license should be modified, suspended, or revoked.
Title 10: Energy
PART 36—LICENSES AND RADIATION SAFETY REQUIREMENTS FOR IRRADIATORS
Subpart B—Specific Licensing Requirements
§ 36.11 Application for a specific license.
§ 36.13 Specific licenses for irradiators.
§ 36.15 Start of construction.
§ 36.17 Applications for exemptions.
§ 36.19 Request for written statements.
