10 C.F.R. § 830.202 Safety basis.
Title 10 - Energy
(a) The contractor responsible for a hazard category 1, 2, or 3 DOE nuclear facility must establish and maintain the safety basis for the facility. (b) In establishing the safety basis for a hazard category 1, 2, or 3 DOE nuclear facility, the contractor responsible for the facility must: (1) Define the scope of the work to be performed; (2) Identify and analyze the hazards associated with the work; (3) Categorize the facility consistent with DOE-STD-1027-92 (“Hazard Categorization and Accident Analysis Techniques for compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports,” Change Notice 1, September 1997); (4) Prepare a documented safety analysis for the facility; and (5) Establish the hazard controls upon which the contractor will rely to ensure adequate protection of workers, the public, and the environment. (c) In maintaining the safety basis for a hazard category 1, 2, or 3 DOE nuclear facility, the contractor responsible for the facility must: (1) Update the safety basis to keep it current and to reflect changes in the facility, the work and the hazards as they are analyzed in the documented safety analysis; (2) Annually submit to DOE either the updated documented safety analysis for approval or a letter stating that there have been no changes in the documented safety analysis since the prior submission; and (3) Incorporate in the safety basis any changes, conditions, or hazard controls directed by DOE.
Title 10: Energy
PART 830—NUCLEAR SAFETY MANAGEMENT
Subpart B—Safety Basis Requirements
§ 830.202 Safety basis.
