10 C.F.R. Subpart K—Design and Control
Title 10 - Energy
(a) Measures shall be taken to maintain radiation exposure in controlled areas ALARA through physical design features and administrative control. The primary methods used shall be physical design features (e.g., confinement, ventilation, remote handling, and shielding). Administrative controls shall be employed only as supplemental methods to control radiation exposure. (b) For specific activities where use of physical design features is demonstrated to be impractical, administrative controls shall be used to maintain radiation exposures ALARA. [63 FR 59686, Nov. 4, 1998] During the design of new facilities or modification of existing facilities, the following objectives shall be adopted: (a) Optimization methods shall be used to assure that occupational exposure is maintained ALARA in developing and justifying facility design and physical controls. (b) The design objective for controlling personnel exposure from external sources of radiation in areas of continuous occupational occupancy (2000 hours per year) shall be to maintain exposure levels below an average of 0.5 mrem (5 microsieverts) per hour and as far below this average as is reasonably achievable. The design objectives for exposure rates for potential exposure to a radiological worker where occupancy differs from the above shall be ALARA and shall not exceed 20 percent of the applicable standards in §835.202. (c) Regarding the control of airborne radioactive material, the design objective shall be, under normal conditions, to avoid releases to the workplace atmosphere and in any situation, to control the inhalation of such material by workers to levels that are ALARA; confinement and ventilation shall normally be used. (d) The design or modification of a facility and the selection of materials shall include features that facilitate operations, maintenance, decontamination, and decommissioning. [58 FR 65485, Dec. 14, 1993, as amended at 63 FR 59686, Nov. 4, 1998] During routine operations, the combination of physical design features and administrative controls shall provide that: (a) The anticipated occupational dose to general employees shall not exceed the limits established at §835.202; and (b) The ALARA process is utilized for personnel exposures to ionizing radiation. [63 FR 59686, Nov. 4, 1998]
Title 10: Energy
PART 835—OCCUPATIONAL RADIATION PROTECTION
Subpart K—Design and Control
§ 835.1001 Design and control.
§ 835.1002 Facility design and modifications.
§ 835.1003 Workplace controls.
