14 C.F.R. § 25.1316 System lightning protection.
Title 14 - Aeronautics and Space
(a) For functions whose failure would contribute to or cause a condition that would prevent the continued safe flight and landing of the airplane, each electrical and electronic system that performs these functions must be designed and installed to ensure that the operation and operational capabilities of the systems to perform these functions are not adversely affected when the airplane is exposed to lightning. (b) For functions whose failure would contribute to or cause a condition that would reduce the capability of the airplane or the ability of the flightcrew to cope with adverse operating conditions, each electrical and electronic system that performs these functions must be designed and installed to ensure that these functions can be recovered in a timely manner after the airplane is exposed to lightning. (c) Compliance with the lightning protection criteria prescribed in paragraphs (a) and (b) of this section must be shown for exposure to a severe lightning environment. The applicant must design for and verify that aircraft electrical/electronic systems are protected against the effects of lightning by: (1) Determining the lightning strike zones for the airplane; (2) Establishing the external lightning environment for the zones; (3) Establishing the internal environment; (4) Identifying all the electrical and electronic systems that are subject to the requirements of this section, and their locations on or within the airplane; (5) Establishing the susceptibility of the systems to the internal and external lightning environment; (6) Designing protection; and (7) Verifying that the protection is adequate. [Doc. No. 25912, 59 FR 22116, Apr. 28, 1994]
Title 14: Aeronautics and Space
PART 25—AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES
Subpart F—Equipment
General
§ 25.1316 System lightning protection.
