14 C.F.R. § 29.505 Ski landing conditions.
Title 14 - Aeronautics and Space
If certification for ski operation is requested, the rotorcraft, with skis, must be designed to withstand the following loading conditions (where P is the maximum static weight on each ski with the rotorcraft at design maximum weight, and n is the limit load factor determined under §29.473(b)): (a) Up-load conditions in which— (1) A vertical load of Pn and a horizontal load of Pn/4 are simultaneously applied at the pedestal bearings; and (2) A vertical load of 1.33 P is applied at the pedestal bearings. (b) A side load condition in which a side load of 0.35 Pn is applied at the pedestal bearings in a horizontal plane perpendicular to the centerline of the rotorcraft. (c) A torque-load condition in which a torque load of 1.33 P (in foot-pounds) is applied to the ski about the vertical axis through the centerline of the pedestal bearings.
Title 14: Aeronautics and Space
PART 29—AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT
Subpart C—Strength Requirements
Ground Loads
§ 29.505 Ski landing conditions.
