14 C.F.R. § 33.45 Calibration tests.
Title 14 - Aeronautics and Space
(a) Each engine must be subjected to the calibration tests necessary to establish its power characteristics and the conditions for the endurance test specified in §33.49. The results of the power characteristics calibration tests form the basis for establishing the characteristics of the engine over its entire operating range of crankshaft rotational speeds, manifold pressures, fuel/air mixture settings, and altitudes. Power ratings are based upon standard atmospheric conditions with only those accessories installed which are essential for engine functioning. (b) A power check at sea level conditions must be accomplished on the endurance test engine after the endurance test. Any change in power characteristics which occurs during the endurance test must be determined. Measurements taken during the final portion of the endurance test may be used in showing compliance with the requirements of this paragraph. [Doc. No. 3025, 29 FR 7453, June 10, 1964, as amended by Amdt. 33–6, 39 FR 35465, Oct. 1, 1974]
Title 14: Aeronautics and Space
PART 33—AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES
Subpart D—Block Tests; Reciprocating Aircraft Engines
§ 33.45 Calibration tests.
