16 C.F.R. PART 309—LABELING REQUIREMENTS FOR ALTERNATIVE FUELS AND ALTERNATIVE FUELED VEHICLES
Title 16 - Commercial Practices
Authority: 42 U.S.C. 13232(a).
Source: 60 FR 26955, May 19, 1995, unless otherwise noted.
As used in subparts B and C of this part: (a) Acquisition includes either of the following: (1) Acquiring the beneficial title to a covered vehicle; or (2) Acquiring a covered vehicle for transportation purposes pursuant to a contract or similar arrangement for a period of 120 days or more. (b) Aftermarket conversion system means any combination of hardware which allows a vehicle or engine to operate on a fuel other than the fuel which the vehicle or engine was originally certified to use. (c) Alternative fuel means (1) Methanol, denatured ethanol, and other alcohols; (2) Mixtures containing 85 percent or more by volume of methanol, denatured ethanol, and/or other alcohols (or such other percentage, but not less than 70 percent, as determined by the Secretary, by rule, to provide for requirements relating to cold start, safety, or vehicle functions), with gasoline or other fuels; (3) Natural gas; (4) Liquefied petroleum gas; (5) Hydrogen; (6) Coal-derived liquid fuels; (7) Fuels (other than alcohol) derived from biological materials; (8) Electricity (including electricity from solar energy); and (9) Any other fuel the Secretary determines, by rule, is substantially not petroleum and would yield substantial energy security benefits and substantial environmental benefits. (d)(1) Consumer in subpart C means an individual, corporation, partnership, association, State, municipality, political subdivision of a State, and any agency, department, or instrumentality of the United States. (2) Consumer or ultimate purchaser in subpart B means, with respect to any non-liquid alternative vehicle fuel (including electricity), the first person who purchases such fuel for purposes other than resale. (e) Conventional fuel means gasoline or diesel fuel. (f) Covered vehicle means either of the following: (1) A dedicated or dual fueled passenger car (or passenger car derivative) capable of seating 12 passengers or less; or (2) A dedicated or dual fueled motor vehicle (other than a passenger car or passenger car derivative) with a gross vehicle weight rating less than 8,500 pounds which has a vehicle curb weight of less than 6,000 pounds and which has a basic vehicle frontal area of less than 45 square feet, which is: (i) Designed primarily for purposes of transportation of property or is a derivation of such a vehicle; or (ii) Designed primarily for transportation of persons and has a capacity of more than 12 persons. (g) Dedicated means designed to operate solely on alternative fuel. (h) Distributor means any person, except a common carrier, who receives non-liquid alternative vehicle fuel (other than electricity) and distributes such fuel to another person other than the consumer. It also means any person, except a common carrier, who receives an electric vehicle fuel dispensing system and distributes such system to a retailer. (i) Dual fueled means capable of operating on alternative fuel and capable of operating on conventional fuel. (j) Electric charging system equipment means equipment that includes an electric battery charger and is used for dispensing electricity to consumers for the purpose of recharging batteries in an electric vehicle. (k) Electric vehicle (“EV”) means a vehicle designed to operate exclusively on electricity stored in a rechargeable battery, multiple batteries, or battery pack. (l) Electric vehicle fuel dispensing system means electric charging system equipment or an electrical energy dispensing system. (m) Electrical energy dispensing system means equipment that does not include an electric charger and is used for dispensing electricity to consumers for the purpose of recharging batteries in an electric vehicle that contains an on-board electric battery charger. (n) Emission certification standard means the emission standard to which a covered vehicle has been certified pursuant to 40 CFR parts 86 and 88. (o) Estimated cruising range for non-EVs means a manufacturer's reasonable estimate of the number of miles a new covered vehicle will travel between refueling, expressed as a lower estimate (i.e., minimum estimated cruising range) and an upper estimate (i.e., maximum estimated cruising range), as determined by §309.22. Estimated cruising range for EVs means a manufacturer's reasonable estimate of the number of miles a new covered EV will travel between recharging, expressed as a single estimate, as determined by §309.22. (p) Fuel dispenser means: (1) For non-liquid alternative vehicle fuels (other than electricity), the dispenser through which a retailer sells the fuel to consumers. (2) For electric vehicle fuel dispensing systems, the dispenser through which a retailer dispenses electricity to consumers for the purpose of recharging batteries in an electric vehicle. (q) Fuel rating means: (1) For non-liquid alternative vehicle fuels (other than electricity), including, but not limited to, compressed natural gas and hydrogen gas, the commonly used name of the fuel with a disclosure of the amount, expressed as a minimum molecular percentage, of the principal component of the fuel. A disclosure of other components, expressed as a minimum molecular percentage, may be included, if desired. (2) For electric vehicle fuel dispensing systems, a common identifier (such as, but not limited to, “electricity,” “electric charging system,” “electric charging station”) with a disclosure of the system's kilowatt (“kW”) capacity, voltage, whether the voltage is alternating current (“ac”) or direct current (“dc”), amperage, and whether the system is conductive or inductive. (r) Manufacturer means the person who obtains a certificate of conformity that the vehicle complies with the standards and requirements of 40 CFR parts 86 and 88. (s) Manufacturer of an electric vehicle fuel dispensing system means any person who manufactures or assembles an electric vehicle fuel dispensing system that is distributed specifically for use by retailers in dispensing electricity to consumers for the purpose of recharging batteries in an electric vehicle. (t) New covered vehicle means a covered vehicle which has not been acquired by a consumer. (u) New vehicle dealer means a person who is engaged in the sale or leasing of new covered vehicles. (v) New vehicle label means a window sticker containing the information required by §309.20(e). (w) Non-liquid alternative fueled vehicle means a vehicle capable of operating on a non-liquid alternative vehicle fuel. (x) Non-liquid alternative vehicle fuel means alternative fuel used for the purpose of powering a non-liquid alternative fueled vehicle, including, but not limited to, compressed natural gas (“CNG”), hydrogen gas (“hydrogen”), electricity, and any other non-liquid vehicle fuel the Secretary determines, by rule, is substantially not petroleum and would yield substantial energy benefits and substantial environmental benefits. (y) Person means an individual, partnership, corporation, or any other business organization. (z) Producer means any person who purchases component elements and combines them to produce and market non-liquid alternative vehicle fuel (other than electricity). (aa) Refiner means any person engaged in the production or importation of non-liquid alternative vehicle fuel (other than electricity). (bb) Retailer means any person who offers for sale, sells, or distributes non-liquid alternative vehicle fuel (including electricity) to consumers. (cc) Secretary means the Secretary of the United States Department of Energy. (dd) Used covered vehicle means a covered vehicle which has been acquired by a consumer, but does not include any vehicle sold only for scrap or parts (title documents surrendered to the State and a salvage certificate issued). (ee) Used vehicle dealer means a person engaged in the sale or leasing of used covered vehicles who has sold or leased five or more used covered vehicles in the previous twelve months, but does not include a bank or financial institution, a business selling or leasing used covered vehicles to an employee of that business, or a lessor selling or leasing a leased vehicle by or to that vehicle's lessee or to an employee of the lessee. (ff) Used vehicle label means a window sticker containing the information required by §309.21(e). (gg) Vehicle fuel tank capacity means the tank's usable capacity (i.e., the volume of fuel that can be pumped into the tank through the filler pipe with the vehicle on a level surface and with the unusable capacity already in the tank). The term does not include unusable capacity (i.e., the volume of fuel left at the bottom of the tank when the vehicle's fuel pump can no longer draw fuel from the tank), the vapor volume of the tank (i.e., the space above the fuel tank filler neck), or the volume of the fuel tank filler neck. This part establishes labeling requirements for non-liquid alternative vehicle fuels, and for certain vehicles powered in whole or in part by alternative fuels. If any portion of this part is stayed or held invalid, the rest of it will stay in force. Inconsistent state and local regulations are preempted to the extent they would frustrate the purposes of this part. (a) If you are an importer, producer, or refiner of non-liquid alternative vehicle fuel (other than electricity), you must determine the fuel rating of all non-liquid alternative vehicle fuel (other than electricity) before you transfer it. You can do that yourself or through a testing lab. To determine fuel ratings, you must possess a reasonable basis, consisting of competent and reliable evidence, for the minimum percentage of the principal component of the non-liquid alternative vehicle fuel (other than electricity) that you must disclose, and for the minimum percentages of other components that you choose to disclose. For the purposes of this section, fuel ratings for the minimum percentage of the principal component of compressed natural gas are to be determined in accordance with test methods set forth in American Society for Testing and Materials (“ASTM”) D 1945–91, “Standard Test Method for Analysis of Natural Gas by Gas Chromatography.” For the purposes of this section, fuel ratings for the minimum percentage of the principal component of hydrogen gas are to be determined in accordance with test methods set forth in ASTM D 1946–90, “Standard Practice for Analysis of Reformed Gas by Gas Chromatography.” This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of D 1945–91 and D 1946–90 may be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103, or may be inspected at the Federal Trade Commission, Public Reference Room, room 130, 600 Pennsylvania Avenue, NW, Washington, DC, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.php. (b) If you are a manufacturer of electric vehicle fuel dispensing systems, you must determine the fuel rating of the electric charge delivered by the electric vehicle fuel dispensing system before you transfer such systems. To determine the fuel rating of the electric vehicle fuel dispensing system, you must possess a reasonable basis, consisting of competent and reliable evidence, for the following output information you must disclose: kilowatt (“kW”) capacity, voltage, whether the voltage is alternating current (“ac”) or direct current (“dc”), amperage, and whether the system is conductive or inductive. [60 FR 26955, May 19, 1995, as amended at 69 FR 18803, Apr. 9, 2004] (a) For non-liquid alternative vehicle fuel (other than electricity), in each transfer you make to anyone who is not a consumer, you must certify the fuel rating of the non-liquid alternative vehicle fuel (other than electricity) consistent with your determination. You can do this in either of two ways: (1) Include a delivery ticket or other paper with each transfer of non-liquid alternative vehicle fuel (other than electricity). It may be an invoice, bill of lading, bill of sale, terminal ticket, delivery ticket, or any other written proof of transfer. It must contain at least these four items: (i) Your name; (ii) The name of the person to whom the non-liquid alternative vehicle fuel (other than electricity) is transferred; (iii) The date of the transfer; and (iv) The fuel rating. (2) Give the person a letter or written statement. This letter must include the date, your name, the other person's name, and the fuel rating of any non-liquid alternative vehicle fuel (other than electricity) you will transfer to that person from the date of the letter onwards. This letter of certification will be good until you transfer non-liquid alternative vehicle fuel (other than electricity) with a lower percentage of the principal component, or of any other component disclosed in the certification. When this happens, you must certify the fuel rating of the new non-liquid alternative vehicle fuel (other than electricity) either with a delivery ticket or by sending a new letter of certification. (b) For electric vehicle fuel dispensing systems, in each transfer you make to anyone who is not a consumer, you must certify the fuel rating of the electric vehicle fuel dispensing system consistent with your determination. You can do this in either of two ways: (1) Include a delivery ticket or other paper with each transfer of an electric vehicle fuel dispensing system. It may be an invoice, bill of lading, bill of sale, delivery ticket, or any other written proof of transfer. It must contain at least these five items: (i) Your name; (ii) The name of the person to whom the electric vehicle fuel dispensing system is transferred; (iii) The date of the transfer; (iv) The model number, serial number, or other identifier of the electric vehicle fuel dispensing system; and (v) The fuel rating. (2) Make the required certification by placing clearly and conspicuously on the electric vehicle fuel dispensing system a permanent legible marking or permanently attached label that discloses the manufacturer's name, the model number, serial number, or other identifier of the system, and the fuel rating. Such marking or label must be located where it can be seen after installation of the system. The marking or label will be deemed “legible,” in terms of placement, if it is located in close proximity to the manufacturer's identification marking. This marking or label must be in addition to, and not a substitute for, the label required to be posted on the electric vehicle fuel dispensing system by the retailer. (c) When you transfer non-liquid alternative vehicle fuel (other than electricity), or an electric vehicle fuel dispensing system, to a common carrier, you must certify the fuel rating of the non-liquid alternative vehicle fuel (other than electricity) or electric vehicle fuel dispensing system to the common carrier, either by letter or on the delivery ticket or other paper, or by a permanent marking or label attached to the electric vehicle fuel dispensing system by the manufacturer. You must keep for one year records of how you determined fuel ratings. The records must be available for inspection by Federal Trade Commission staff members, or by people authorized by FTC. (a) If you are a distributor of non-liquid alternative vehicle fuel (other than electricity), you must certify the fuel rating of the fuel in each transfer you make to anyone who is not a consumer. You may certify either by using a delivery ticket or other paper with each transfer of fuel, as outlined in §309.11(a)(1), or by using a letter of certification, as outlined in §309.11(a)(2). (b) If you are a distributor of electric vehicle fuel dispensing systems, you must certify the fuel rating of the system in each transfer you make to anyone who is not a consumer. You may certify by using a delivery ticket or other paper with each transfer, as outlined in §309.11(b)(1), or by using the permanent marking or permanent label attached to the system by the manufacturer, as outlined in §309.11(b)(2). (c) If you do not blend non-liquid alternative vehicle fuels (other than electricity), you must certify consistent with the fuel rating certified to you. If you blend non-liquid alternative vehicle fuel (other than electricity), you must possess a reasonable basis, consisting of competent and reliable evidence, as required by §309.10(a), for the fuel rating that you certify for the blend. (d) When you transfer non-liquid alternative vehicle fuel (other than electricity), or an electric vehicle fuel dispensing system, to a common carrier, you must certify the fuel rating of the non-liquid alternative vehicle fuel (other than electricity) or electric vehicle fuel dispensing system to the common carrier, either by letter or on the delivery ticket or other paper, or by a permanent marking or label attached to the electric vehicle fuel dispensing system by the manufacturer. When you receive non-liquid alternative vehicle fuel (other than electricity), or an electric vehicle fuel dispensing system, from a common carrier, you also must receive from the common carrier a certification of the fuel rating of the non-liquid alternative vehicle fuel (other than electricity) or electric vehicle fuel dispensing system, either by letter or on the delivery ticket or other paper, or by a permanent marking or label attached to the electric vehicle fuel dispensing system by the manufacturer. You must keep for one year any delivery tickets, letters of certification, or other paper on which you based your fuel rating certifications for non-liquid alternative vehicle fuels (other than electricity) and for electric vehicle fuel dispensing systems. You also must keep for one year records of any fuel rating determinations you made according to §309.10. If you rely for your certification on a permanent marking or permanent label attached to the electric vehicle fuel dispensing system by the manufacturer, you must not remove or deface the permanent marking or label. The records must be available for inspection by Federal Trade Commission staff members, or by persons authorized by FTC. (a) If you are a retailer who offers for sale or sells non-liquid alternative vehicle fuel (other than electricity) to consumers, you must post the fuel rating of each non-liquid alternative vehicle fuel. If you are a retailer who offers for sale or sells electricity to consumers through an electric vehicle fuel dispensing system, you must post the fuel rating of the electric vehicle fuel dispensing system you use. You must do this by putting at least one label on the face of each fuel dispenser through which you sell non-liquid alternative vehicle fuel. If you are selling two or more kinds of non-liquid alternative vehicle fuels with different fuel ratings from a single fuel dispenser, you must put separate labels for each kind of non-liquid alternative vehicle fuel on the face of the fuel dispenser. (b)(1) The label, or labels, must be placed conspicuously on the fuel dispenser so as to be in full view of consumers and as near as reasonably practical to the price per unit of the non-liquid alternative vehicle fuel. (2) You may petition for an exemption from the placement requirements by writing the Secretary of the Federal Trade Commission, Washington, DC 20580. You must state the reasons that you want the exemption. (c) If you do not blend non-liquid alternative vehicle fuels (other than electricity), you must post consistent with the fuel rating certified to you. If you blend non-liquid alternative vehicle fuel (other than electricity), you must possess a reasonable basis, consisting of competent and reliable evidence, as required by §309.10(a), for the fuel rating that you post for the blend. (d)(1) You must maintain and replace labels as needed to make sure consumers can easily see and read them. (2) If the labels you have are destroyed or are unusable or unreadable for some unexpected reason, you may satisfy this part by posting a temporary label as much like the required label as possible. You must still get and post the required label without delay. (e) The following examples of fuel rating disclosures for CNG and hydrogen are meant to serve as illustrations of compliance with this part, but do not limit the rule's coverage to only the mentioned non-liquid alternative vehicle fuels (other than electricity): (1) “CNG”
“Minimum” “XXX%” “Methane” (2) “Hydrogen”
“Minimum” “XXX%” “Hydrogen” (f) The following example of fuel rating disclosures for electric vehicle fuel dispensing systems is meant to serve as an illustration of compliance with this part:
“Electricity” “XX kW” “XXX vac/XX amps” “Inductive” (g) When you receive non-liquid alternative vehicle fuel (other than electricity), or an electric vehicle fuel dispensing system, from a common carrier, you also must receive from the common carrier a certification of the fuel rating of the non-liquid alternative vehicle fuel (other than electricity) or electric vehicle fuel dispensing system, either by letter or on the delivery ticket or other paper, or by a permanent marking or label attached to the electric vehicle fuel dispensing system by the manufacturer. You must keep for one year any delivery tickets, letters of certification, or other paper on which you based your posting of fuel ratings for non-liquid alternative vehicle fuels. You also must keep for one year records of any fuel rating determinations you made according to §309.10. If you rely for your posting on a permanent marking or permanent label attached to the electric vehicle fuel dispensing system by the manufacturer, you must not remove or deface the permanent marking or label. The required records, other than the permanent marking or label on the electric vehicle fuel dispensing system, may be kept at the retail outlet or at a reasonably close location. The records, including the permanent marking or label on each electric vehicle fuel dispensing system, must be available for inspection by Federal Trade Commission staff members or by persons authorized by FTC. All labels must meet the following specifications: (a) Layout: (1) Non-liquid alternative vehicle fuel (other than electricity) labels with disclosure of principal component only. The label is 3&inch; (7.62 cm) wide × 2 (2) Non-liquid alternative vehicle fuel (other than electricity) labels with disclosure of two components. The label is 3&inch; (7.62 cm) wide × 2 (3) Electric vehicle fuel dispensing system labels. The label is 3&inch; (7.62 cm) wide × 2 (b) Type size and setting: (1) Labels for non-liquid alternative vehicle fuels (other than electricity) with disclosure of principal component only. All type should be set in upper case (all caps) “Helvetica Black” throughout. Helvetica Black is available in a variety of computer desk-top and photo-typesetting systems. Its name may vary, but the type must conform in style and thickness to the sample provided here. The spacing between letters and words should be set as “normal.” The type for the fuel name is 50 point ( (2) Labels for non-liquid alternative vehicle fuels (other than electricity) with disclosure of two components. All type should be set in upper case (all caps) “Helvetica Black” throughout. Helvetica Black is available in a variety of computer desk-top and photo-typesetting systems. Its name may vary, but the type must conform in style and thickness to the sample provided here. The spacing between letters and words should be set as “normal.” The type for the fuel name is 50 point ( (3) Labels for electric vehicle fuel dispensing systems. All type should be set in upper case (all caps) “Helvetica Black” throughout. Helvetica Black is available in a variety of computer desk-top and photo-typesetting systems. Its name may vary, but the type must conform in style and thickness to the sample provided here. The spacing between letters and words should be set as “normal.” The type for the common identifier is 50 point ( (c) Colors: The background color on the labels for all non-liquid alternative vehicle fuels (including electricity), and the color of the knock-out type within the black band, is Orange: PMS 1495. All other type is process black. All borders are process black. All colors must be non-fade. (d) Contents. Examples of the contents are shown in Figures 1 through 3. The proper fuel rating for each non-liquid alternative vehicle fuel (including electricity) must be shown. No marks or information other than that called for by this part may appear on the labels. (e) Special label protection. All labels must be capable of withstanding extremes of weather conditions for a period of at least one year. They must be resistant to vehicle fuel, oil, grease, solvents, detergents, and water. (f) Illustrations of labels. Labels must meet the specifications in this section and look like Figures 1 through 3 of appendix A, except the black print should be on the appropriately colored background. (a) Affixing and maintaining labels. (1) Before offering a new covered vehicle for acquisition to consumers, manufacturers shall affix or cause to be affixed, and new vehicle dealers shall maintain or cause to be maintained, a new vehicle label on a visible surface of each such vehicle. (2) If an aftermarket conversion system is installed on a vehicle by a person other than the manufacturer prior to such vehicle's being acquired by a consumer, the manufacturer shall provide that person with the vehicle's estimated cruising range (as determined by §309.22(a) for dedicated vehicles and §309.22(b) for dual fueled vehicles) and ensure that new vehicle labels are affixed to such vehicles as required by paragraph (a) of this section. (b) Layout. Figures 4, 5, and 5.1 are prototype labels that demonstrate the proper layout. All positioning, spacing, type size, and line widths shall be similar to and consistent with the prototype labels. Labels required by this section are one-sided and rectangular in shape measuring 7 inches (17.78 cm) wide and 7 (c) Type size and setting. The Helvetica Condensed and Helvetica family typefaces or equivalent shall be used exclusively on the label. Specific type sizes and faces to be used are indicated on the prototype labels (Figures 4, 5, and 5.1 of appendix A). No hyphenation should be used in setting headline or text copy. Positioning and spacing should follow the prototypes closely. (d) Colors and Paper Stock. All labels shall be printed in process black ink on Hammermill Offset Opaque Vellum/S.70 Sky Blue (or equivalent) paper. (e) Content. (1) Headlines and text, as illustrated in Figures 4, 5, and 5.1 of appendix A, are standard for all labels. (2) Estimated cruising range. (i) For dedicated vehicles, determined in accordance with §309.22(a). (ii) For dual fueled vehicles, determined in accordance with §309.22(b). [69 FR 55338, Sept. 14, 2004] (a) Affixing and maintaining labels. Before offering a used covered vehicle for acquisition to consumers, used vehicle dealers shall affix and maintain, or cause to be affixed and maintained, a used vehicle label on a visible surface of each such vehicle. (b) Layout. Figure 6 of appendix A is the prototype label that demonstrates the proper layout. All positioning, spacing, type size, and line widths should be similar to and consistent with the prototype label. The label required by this section is one-sided and rectangular in shape measuring 7 inches (17.78 cm) in width and 7 (c) Type size and setting. The Helvetica Condensed and Helvetica family typefaces or equivalent shall be used exclusively on the label. Specific type sizes and faces to be used are indicated on the prototype label (Figure 6 of appendix A). No hyphenation should be used in setting headline or text copy. Positioning and spacing should follow the prototype closely. (d) Colors and Paper Stock. All labels shall be printed in process black ink on Hammermill Offset Opaque Vellum/S.70 Sky Blue (or equivalent) paper. (e) Contents. Headlines and text, as illustrated in Figure 6 of appendix A, are standard for all labels. [69 FR 55338, Sept. 14, 2004] (a) Dedicated vehicles. (1) Estimated cruising range values for dedicated vehicles required to comply with the provisions of 40 CFR part 600 are to be calculated in accordance with the following: (i) The lower range value shall be determined by multiplying the vehicle's estimated city fuel-economy by its fuel tank capacity, then rounding to the next lower integer value. (ii) The upper range value shall be determined by multiplying the vehicle's estimated highway fuel-economy by its fuel tank capacity, then rounding to the next higher integer value. (2) Estimated cruising range for an EV is the actual vehicle range determined in accordance with test methods set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634–1993–05–20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of SAE J1634–1993–05–20 may be obtained from the Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA, 15096–0001, or may be inspected at the Federal Trade Commission, Public Reference Room, room 130, 600 Pennsylvania Avenue, NW, Washington, DC, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.php. (3) To determine the estimated cruising range values for dedicated vehicles not required to comply with the provisions of 40 CFR part 600 (other than electric vehicles), you must possess a reasonable basis, consisting of competent and reliable evidence that substantiates the minimum and maximum number of miles the vehicle will travel between refuelings or rechargings that is claimed. (b) Dual-fueled vehicles. (1) Estimated cruising range values for dual-fueled vehicles required to comply with the provisions of 40 CFR part 600 are to be calculated in accordance with the following: (i) The lower range value for the vehicle while operating exclusively on alternative fuel shall be determined by multiplying the vehicle's estimated city fuel-economy by its alternative-fuel tank capacity, then rounding to the next lower integer value. (ii) The upper range value for the vehicle while operating exclusively on alternative fuel shall be determined by multiplying the vehicle's estimated highway fuel-economy by its alternative-fuel tank capacity, then rounding to the next higher integer value. (iii) The lower range value for the vehicle while operating exclusively on conventional fuel shall be determined by multiplying the vehicle's estimated city fuel-economy by its conventional-fuel tank capacity, then rounding to the next lower integer value. (iv) The upper range value for the vehicle while operating exclusively on conventional fuel shall be determined by multiplying the vehicle's estimated highway fuel-economy by its conventional-fuel tank capacity, then rounding to the next higher integer value. (2) [Reserved] (3) To determine the estimated cruising range values for dual-fueled vehicles not required to comply with the provisions of 40 CFR part 600 (other than electric vehicles), you must possess a reasonable basis, consisting of competent and reliable evidence, of: (i) The minimum and maximum number of miles the vehicle will travel between refuelings or rechargings when operated exclusively on alternative fuel, and (ii) The minimum and maximum number of miles the vehicle will travel between refuelings or rechargings when operated exclusively on conventional fuel. [60 FR 26955, May 19, 1995, as amended at 69 FR 18803, Apr. 9, 2004] Manufacturers required to comply this subpart shall establish, maintain, and retain copies of all data, reports, records, and procedures used to meet the requirements of this subpart for three years after the end of the model year to which they relate. They must be available for inspection by Federal Trade Commission staff members, or by people authorized by the Federal Trade Commission. [60 FR 26955, May 19, 1995, as amended at 69 FR 55339, Sept. 14, 2004]
Title 16: Commercial Practices
PART 309—LABELING REQUIREMENTS FOR ALTERNATIVE FUELS AND ALTERNATIVE FUELED VEHICLES
Section Contents
§ 309.1 Definitions.
§ 309.2 What this part does.
§ 309.3 Stayed or invalid portions.
§ 309.4 Preemption.
Duties of Importers, Producers, and Refiners of Non-Liquid Alternative Vehicle Fuels (Other Than Electricity) and of Manufacturers of Electric Vehicle Fuel Dispensing Systems
§ 309.10 Alternative vehicle fuel rating.
§ 309.11 Certification.
§ 309.12 Recordkeeping.
Duties of Distributors of Non-Liquid Alternative Vehicle Fuels (Other Than Electricity) and of Electric Vehicle Fuel Dispensing Systems
§ 309.13 Certification.
§ 309.14 Recordkeeping.
Duties of Retailers
§ 309.15 Posting of non-liquid alternative vehicle fuel rating.
§ 309.16 Recordkeeping.
Label Specifications
§ 309.17 Labels.
§ 309.20 Labeling requirements for new covered vehicles.
§ 309.21 Labeling requirements for used covered vehicles.
§ 309.22 Determining estimated cruising range.
§ 309.23 Recordkeeping.
Appendix A to Part 309—Figures for Part 309
Subpart A—General
top
§ 309.1 Definitions.
top
§ 309.2 What this part does.
top
§ 309.3 Stayed or invalid portions.
top
§ 309.4 Preemption.
top
Subpart B—Requirements for Alternative Fuels
top
Duties of Importers, Producers, and Refiners of Non-Liquid Alternative Vehicle Fuels (Other Than Electricity) and of Manufacturers of Electric Vehicle Fuel Dispensing Systems
top
§ 309.10 Alternative vehicle fuel rating.
top
§ 309.11 Certification.
top
§ 309.12 Recordkeeping.
top
Duties of Distributors of Non-Liquid Alternative Vehicle Fuels (Other Than Electricity) and of Electric Vehicle Fuel Dispensing Systems
top
§ 309.13 Certification.
top
§ 309.14 Recordkeeping.
top
Duties of Retailers
top
§ 309.15 Posting of non-liquid alternative vehicle fuel rating.
top
§ 309.16 Recordkeeping.
top
Label Specifications
top
§ 309.17 Labels.
top
Subpart C—Requirements for Alternative Fueled Vehicles
top
§ 309.20 Labeling requirements for new covered vehicles.
top
§ 309.21 Labeling requirements for used covered vehicles.
top
§ 309.22 Determining estimated cruising range.
top
§ 309.23 Recordkeeping.
top
Appendix A to Part 309—Figures for Part 309
top
