16 C.F.R. § 1508.7 Construction and finishing.
Title 16 - Commercial Practices
(a) All wood surfaces shall be smooth and free from splinters. (b) All wood parts shall be free from splits, cracks, or other defects which might lead to structural failure. (c) Crib end panels and sides or any attachment thereto shall have no horizontal bar, ledge, projection, or other surface accessible to a child inside the crib capable of being used as a toehold located less than 51 centimeters (20 inches) above the mattress support in its lowest position when the side rail is in its highest position, except the lower horizontal bar of the crib rail may have a vertical dimension that extends no higher than 7.6 centimeters (3 inches) above the mattress support in its lowest position. In no case will any gap between the top surface of the mattress support and the bottom of the lower horizontal rail be permitted. For the purposes of this paragraph, any ledge or projection with a depth dimension greater than 1 centimeter (
Title 16: Commercial Practices
PART 1508—REQUIREMENTS FOR FULL-SIZE BABY CRIBS
§ 1508.7 Construction and finishing.
