16 C.F.R. PART 1203--SAFETY STANDARD FOR BICYCLE HELMETS
TITLE 16--Commercial Practices
CHAPTER II--CONSUMER PRODUCT SAFETY COMMISSION
SUBCHAPTER B--CONSUMER PRODUCT SAFETY ACT REGULATIONS
PART 1203--SAFETY STANDARD FOR BICYCLE HELMETS
Subpart A--THE STANDARD
|
Scope, general requirements, and effective date.
|
|
|
Construction requirements--projections.
|
|
|
Labeling and instructions.
|
|
|
Conditioning environments.
|
|
|
Selecting the test headform.
|
|
|
Marking the impact test line.
|
|
|
Positional stability test (roll-off resistance).
|
|
|
Dynamic strength of retention system test.
|
|
Subpart B--CERTIFICATION
|
Purpose, basis, and scope.
|
|
|
Product certification and labeling by manufacturers (including importers).
|
|
Subpart C--RECORDKEEPING
|
Recordkeeping requirements.
|
|
Subpart D--REQUIREMENTS FOR BICYCLE HELMETS MANUFACTURED FROM MARCH 17, 1995, THROUGH MARCH 10, 1999
|
Scope and effective date.
|
|
|
Interim safety standards.
|
|
|
Figure 4 to Part 1203--Location of Test Lines for Helmets Intended for Persons Five (5) Years of Age and Older
|
|