21 C.F.R. Subpart B—Required Manufacturers' Reports for Listed Electronic Products
Title 21 - Food and Drugs
Source: 60 FR 48386, Sept. 19, 1995, unless otherwise noted.
Every manufacturer of a product or component requiring aproduct report as set forth in table 1 of §1002.1 shall submit a product report to the Center for Devices and Radiological Health, Electronic Product Reports, Office of Compliance (HFZ–307), 2098 Gaither Rd., Rockville, MD 20850, prior to the introduction of such product into commerce. The report shall be distinctly marked “Radiation Safety Product Report of (name of manufacturer)” and shall: (a) Identify which listed product is being reported. (b) Identify each model of the listed product together with sufficient information concerning the manufacturer's code or other system of labeling to enable the Director to determine the place of manufacture. (c) Include information on all components and accessories provided in, on, or with the listed product that may affect the quantity, quality, or direction of the radiation emissions. (d) Describe the function, operational characteristics affecting radiation emissions, and intended and known uses of each model of the listed product. (e) State the standard or design specifications, if any, for each model with respect to electronic product radiation safety. Reference may be made to a Federal standard, if applicable. (f) For each model, describe the physical or electrical characteristics, such as shielding or electronic circuitry, incorporated into the product in order to meet the standards or specifications reported pursuant to paragraph (e) of this section. (g) Describe the methods and procedures employed, if any, in testing and measuring each model with respect to electronic product radiation safety, including the control of unnecessary, secondary, or leakage electronic product radiation, the applicable quality control procedures used for each model, and the basis for selecting such testing and quality control procedures. (h) For those products which may produce increased radiation with aging, describe the methods and procedures used, and frequency of testing of each model for durability and stability with respect to electronic product radiation safety. Include the basis for selecting such methods and procedures, or for determining that such testing and quality control procedures are not necessary. (i) Provide sufficient results of the testing, measuring, and quality control procedures described in accordance with paragraphs (g) and (h) of this section to enable the Director to determine the effectiveness of those test methods and procedures. (j) Report for each model all warning signs, labels, and instructions for installation, operation, and use that relate to electronic product radiation safety. (k) Provide, upon request, such other information as the Director may reasonably require to enable him/her to determine whether the manufacturer has acted or is acting in compliance with the Act and any standards prescribed thereunder, and to enable the Director to carry out the purposes of the Act. Prior to the introduction into commerce of a new or modified model within a model or chassis family of a product listed in table 1 of §1002.1 for which a report under §1002.10 is required, each manufacturer shall submit a report with respect to such new or modified model describing any changes in the information previously submitted in the product report. Reports will be required for changes that: (a) Affect actual or potential radiation emission. (b) Affect the manner of compliance with a standard or manner of testing for radiation safety. Manufacturers of products requiring abbreviated reports as specified in table 1 of §1002.1 shall submit, prior to the introduction of such product, a report distinctly marked “Radiation Safety Abbreviated Report” which shall include: (a) Firm and model identification. (b) A brief description of operational characteristics that affect radiation emissions, transmission, or leakage or that control exposure. (c) A list of applications or uses. (d) Radiation emission, transmission, or leakage levels. (e) If necessary, additional information as may be requested to determine compliance with the Act and this part. (a) Every manufacturer of products requiring an annual report as specified in table 1 of §1002.1 shall submit an annual report summarizing the contents of the records required to be maintained by §1002.30(a) and providing the volume of products produced, sold, or installed. (b) Reports are due annually by September 1. Such reports shall cover the 12-month period ending on June 30 preceding the due date of the report. (c) New models of a model family that do not involve changes in radiation emission or requirements of a performance standard do not require supplemental reports prior to introduction into commerce. These model numbers should be reported in quarterly updates to the annual report.
Title 21: Food and Drugs
PART 1002—RECORDS AND REPORTS
Subpart B—Required Manufacturers' Reports for Listed Electronic Products
§ 1002.10 Product reports.
§ 1002.11 Supplemental reports.
§ 1002.12 Abbreviated reports.
§ 1002.13 Annual reports.
