21 C.F.R. PART 177--INDIRECT FOOD ADDITIVES: POLYMERS
TITLE 21--Food and Drugs
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES
SUBCHAPTER B--FOOD FOR HUMAN CONSUMPTION
PART 177--INDIRECT FOOD ADDITIVES: POLYMERS
Subpart A--[RESERVED]
Subpart B--SUBSTANCES FOR USE AS BASIC COMPONENTS OF SINGLE AND REPEATED USE FOOD CONTACT SURFACES
|
Acrylic and modified acrylic plastics, semirigid and rigid.
|
|
|
Acrylonitrile/butadiene/styrene co-polymer.
|
|
|
Acrylonitrile/butadiene/styrene/methyl methacrylate copolymer.
|
|
|
Acrylonitrile/styrene copoly-mer.
|
|
|
Acrylonitrile/styrene copoly-mer modified with butadiene/styrene elastomer.
|
|
|
-Alkylglutarimide/acrylic copolymers.
|
|
|
Closures with sealing gaskets for food containers.
|
|
|
Cross-linked polyacrylate copolymers.
|
|
|
1,4-Cyclohexylene dimethylene terephthalate and 1,4-cyclohexylene dimethylene isophthalate copolymer.
|
|
|
Ethylene-acrylic acid copolymers.
|
|
|
Ethylene-carbon monoxide copolymers.
|
|
|
Ethylene-1, 4-cyclohexylene dimethylene terephthalate copolymers.
|
|
|
Ethylene-ethyl acrylate copolymers.
|
|
|
Ethylene-methyl acrylate copolymer resins.
|
|
|
Ethylene/1,3-phenylene oxyethylene isophthalate/ terephthalate copolymer.
|
|
|
Ethylene-vinyl acetate copolymers.
|
|
|
Ethylene-vinyl acetate-vinyl alcohol copolymers.
|
|
|
Laminate structures for use at temperatures of 250 °F and above.
|
|
|
Laminate structures for use at temperatures between 120 °F and 250 °F.
|
|
|
Hydroxyethyl cellulose film, water-insoluble.
|
|
|
Isobutylene-butene copolymers.
|
|
|
4,4′-Isopropylidenediphenol-epichlorohydrin resins minimum molecular weight 10,000.
|
|
|
Melamine-formaldehyde resins in molded articles.
|
|
|
Nitrile rubber modified acrylonitrile-methyl acrylate copolymers.
|
|
|
Polyaryletherketone resins.
|
|
|
Poly-1-butene resins and butene/ethylene copolymers.
|
|
|
Polyestercarbonate resins.
|
|
|
Polyethylene resins, carboxyl modified.
|
|
|
Polyethylene, chlorinated.
|
|
|
Polyethylene, fluorinated.
|
|
|
Polyethylene phthalate polymers.
|
|
|
Poly (phenyleneterephthalamide) resins.
|
|
|
Poly(p-methylstyrene) and rubber-modified poly(p-methylstyrene).
|
|
|
Poly(oxy-1,2-ethanediyloxycarbonyl-2,6-naphthalenediylcarbonyl) resins.
|
|
|
Polystyrene and rubber-modified polystyrene.
|
|
|
Polysulfide polymer-polyepoxy resins.
|
|
|
Poly (tetramethylene terephthalate).
|
|
|
Styrene-maleic anhydride copolymers.
|
|
|
Styrene-methyl methacrylate copolymers.
|
|
|
Urea-formaldehyde resins in molded articles.
|
|
|
Vinyl chloride-ethylene copolymers.
|
|
|
Vinyl chloride-hexene-1 copolymers.
|
|
|
Vinyl chloride-lauryl vinyl ether copolymers.
|
|
|
Vinyl chloride-propylene copolymers.
|
|
|
Vinylidene chloride/methyl acrylate copolymers.
|
|
|
Vinylidene chloride/methyl acrylate/methyl methacrylate polymers.
|
|
Subpart C--SUBSTANCES FOR USE ONLY AS COMPONENTS OF ARTICLES INTENDED FOR REPEATED USE
|
Ethylene polymer, chlorosulfonated.
|
|
|
Filters, microporous polymeric.
|
|
|
4,4′-Isopropylidenediphenolepichlorohydrin thermosetting epoxy resins.
|
|
|
Mineral reinforced nylon resins.
|
|
|
Perfluorocarbon cured elastomers.
|
|
|
Phenolic resins in molded articles.
|
|
|
Poly(aryletherketone) resins.
|
|
|
Polyester resins, cross-linked.
|
|
|
Polyether resins, chlorinated.
|
|
|
Poly(2,6-dimethyl-1,4-phenylene) oxide resins.
|
|
|
Polymethylmethacrylate/poly(trimethoxysilylpropyl)methacrylate copolymers.
|
|
|
Polyoxymethylene copolymer.
|
|
|
Polyoxymethylene homopolymer.
|
|
|
Polyphenylene sulfide resins.
|
|
|
Polyphenylene sulfone resins.
|
|
|
Polyvinylidene fluoride resins.
|
|
|
Reverse osmosis membranes.
|
|
|
Rubber articles intended for repeated use.
|
|
|
Styrene-divinylbenzene resins, cross-linked.
|
|
|
Textiles and textile fibers.
|
|
|
Ultra-filtration membranes.
|
|