24 C.F.R. § 35.1350 Safe work practices.
Title 24 - Housing and Urban Development
(a) Prohibited methods. Methods of paint removal listed in §35.140 shall not be used. (b) Occupant protection and worksite preparation. Occupants and their belongings shall be protected, and the worksite prepared, in accordance with §35.1345. A person performing this work shall be trained on hazards and either be supervised or have completed successfully one of the specified courses, in accordance with §35.1330(a)(4). (c) Specialized cleaning. After hazard reduction activities have been completed, the worksite shall be cleaned using cleaning methods, products, and devices that are successful in cleaning up dust-lead hazards, such as a HEPA vacuum or other method of equivalent efficacy, and lead-specific detergents or equivalent. (d) De minimis levels. Safe work practices are not required when maintenance or hazard reduction activities do not disturb painted surfaces that total more than: (1) 20 square feet (2 square meters) on exterior surfaces; (2) 2 square feet (0.2 square meters) in any one interior room or space; or (3) 10 percent of the total surface area on an interior or exterior type of component with a small surface area. Examples include window sills, baseboards, and trim. [64 FR 50218, Sept. 15, 1999, as amended at 69 FR 34275, June 21, 2004]
Title 24: Housing and Urban Development
PART 35—LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES
Subpart R—Methods and Standards for Lead-Paint Hazard Evaluation and Hazard Reduction Activities
§ 35.1350 Safe work practices.
