---

24 C.F.R. § 200.925b   Residential and institutional building code comparison items.

Title 24 - Housing and Urban Development

Title 24: Housing and Urban Development
PART 200—INTRODUCTION TO FHA PROGRAMS
Subpart S—Minimum Property Standards

Browse Previous |  Browse Next

§ 200.925b   Residential and institutional building code comparison items.

HUD will review each local code submitted under this chapter to determine whether it regulates all of the following areas and subareas:

(a) Fire safety. (1) Construction types permitted;

(2) Allowable height and area;

(3) Fire separations;

(4) Fire resistance requirements;

(5) Means of egress (number and distance);

(6) Individual unit smoke detectors;

(7) Building alarm systems;

(8) Highrise criteria;

(b) Light and ventilation. (1) Habitable rooms;

(2) Bath and toilet rooms.

(c) Structural loads and seismic design. (1) Design live loads;

(2) Design dead loads;

(3) Snow loads;

(4) Wind loads.

(5) Earthquake loads (in localities identified by ASCE 7–88 (formerly ANSI A58.1–82) as being in seismic zones 1, 2, 3, or 4, and Guam).

(6) Special loads, i.e., soil pressure, railings, interior walls etc.

(d) Foundation systems. (1) Soil tests;

(2) Foundation depths;

(3) Footings;

(4) Foundation materials criteria;

(5) Piles, i.e., materials, allowable stresses, design;

(6) Excavation;

(e) Materials standards.

(f) Construction components. (1) Steel;

(2) Masonry;

(3) Concrete;

(4) Gypsum;

(5) Lumber;

(6) Roof construction and covering;

(7) Chimneys and fireplaces.

(g) Glass. (1) Thickness/area requirements;

(2) Safety glazing.

(h) Mechanical. (1) Heating, cooling and ventilation systems;

(2) Boilers and pressure vessels;

(3) Gas, liquid and solid fuel piping and equipment;

(4) Chimneys and vents;

(5) Ventilation (air changes).

(i) Plumbing. (1) Materials standards;

(2) Sizing and installing drainage systems;

(3) Vents and venting;

(4) Traps;

(5) Cleanouts;

(6) Plumbing fixtures;

(7) Water supply and distribution;

(8) Storm drain systems.

(j) Electrical. (1) Wiring design and protection;

(2) Wiring methods and materials;

(3) Equipment for general use;

(4) Special equipment;

(5) Special conditions;

(6) Communication systems.

(k) Elevators. (1) Reference ASME/ANSI Standard A 17.1–1987; and the ASME/ANSI A17.1b–1989 Addenda.

(2) Acceptance tests and periodic tests.

[49 FR 18696, May 1, 1984, as amended at 51 FR 28699, Aug. 11, 1986; 58 FR 60248, Nov. 15, 1993; 59 FR 36695, July 19, 1994]

Browse Previous |  Browse Next