24 C.F.R. § 3280.4 Incorporation by reference.
Title 24 - Housing and Urban Development
(a) The specifications, standards and codes of the following organizations are incorporated by reference in 24 CFR part 3280 (this Standard) pursuant to 5 U.S.C. 552(a) and 1 CFR part 51 as though set forth in full. The incorporation by reference of these standards has been approved by the Director of the Federal Register. Reference standards have the same force and effect as this Standard (24 CFR part 3280) except that whenever reference standards and this Standard are inconsistent, the requirements of this Standard prevail to the extent of the inconsistency. (b) The abbreviations and addresses of organizations issuing the referenced standards appear below. Reference standards which are not available from their producer organizations may be obtained from the Office of Manufactured Housing and Regulatory Functions, Manufactured Housing and Construction Standards Division, U.S. Department of Housing and Urban Development, 451 Seventh Street, SW., room B–133, Washington, DC 20410.
AA—Aluminum Association, 900 19th Street NW., suite 300, Washington, DC 20006. AAMA—American Architectural Manufacturers Association, 1540 East Dundee Road, Palatine, Illinois 60067 AFPA [previously (N)FPA]—American Forest and Paper Association, 1250 Connecticut Avenue, NW., Washington, DC 20036 [previously named (N)FPA-National Forest Products Association] AGA—American Gas Association, 8501 East Pleasant Valley Road, Cleveland, Ohio 44131 AISC—American Institute of Steel Construction, One East Wacker Drive, Chicago, IL 60601 AISI—American Iron and Steel Institute, 1101 17th Street, NW., Washington, DC 20036 AITC—American Institute of Timber Construction, 11818 SE Mill Plain Blvd., suite 415, Vancouver, Washington 98684 ANSI—American National Standards Institute, 1430 Broadway, New York, New York 10018 APA—American Plywood Association, P.O. Box 11700, Tacoma, Washington 98411 ARI—Air Conditioning and Refrigeration Institute, 1501 Wilson Blvd., 6th Floor, Arlington, VA 22209–2403 ASCE—American Society of Civil Engineers, 345 East 47th Street, New York, New York 10017–2398 ASHRAE—American Society of Heating, Refrigeration and Air Conditioning Engineers, 1791 Tulle Circle, NE., Atlanta, Georgia 30329 ASME—American Society of Mechanical Engineers, 345 East 47th Street, New York, New York 10017 ASSE—American Society of Sanitary Engineering, P.O. Box 40362, Bay Village, Ohio 44140 ASTM—American Society for Testing and Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103 CISPI—Cast Iron Soil Pipe Institute, 5959 Shallowford Road, suite 419, Chattanooga, TN 37421 DOC—U.S. Department of Commerce, National Institute of Standards and Technology, Office of Engineering Standards, room A–166, Technical Building, Washington, DC 20234 FS—Federal Specifications, General Services Administration, Specifications Branch, room 6039, GSA Building, 7th and D Streets, SW., Washington, DC 20407 HPVA (previously HPMA)—Hardwood Plywood and Veneer Association, P.O. Box 2789, Reston, VA 22090 (previously named HPMA Hardwood Plywood Manufacturers Association) HUD-FHA—Department of Housing and Urban Development, 451 Seventh Street, SW., Washington, DC 20410 HUD User, 11491 Sunset Hills Road, Reston, VA 20190–5254 IAPMO—International Association of Plumbing and Mechanical Officials, 20001 Walnut Drive South, Walnut, CA 91784–2825 IITRI—IIT Research Institute, 10 West 35th Street, Chicago, IL 60616 MIL—Military Specifications and Standards, Naval Publications and Forms Center, 5801 Tabor Avenue, Philadelphia, Pennsylvania 19120 NEMA—National Electrical Manufacturers Association, 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 NER—International Code Council Evaluation Service [Previously known as National Evaluation Service], 5360 Workman Mill Road, Whittier, CA 90601–0543 NFPA—National Fire Protection Association, Batterymarch Park, Quincy, MA 02269 NPA—National Particleboard Association, 18928 Premiere Court, Gaithersburg, MD 20879 NFRC—National Fenestration Rating Council, 8984 Georgia Avenue, Suite 320, Silver Spring, MD 20910 NSF—National Sanitation Foundation, P.O. Box 1468, Ann Arbor, MI 48105 NWWDA—National Wood Window and Door Association, 1400 E. Toughy Avenue, suite G–54, Des Plaines, IL 60018 SAE—Society of Automotive Engineers, 400 Commonwealth Drive, Warrendale, Pennsylvania 15096 SJI—Steel Joist Institute, 1205 48th Avenue North, suite A, Myrtle Beach, SC 29577 TPI—Truss Plate Institute, 583 D'Onofrio Drive, suite 200, Madison, Wisconsin 53719 UL—Underwriters' Laboratories, Inc., 333 Pfingsten Road, Northbrook, Illinois 60062 WDMA—Window and Door Manufacturers Association [Previously known as the National Wood Window and Door Association, NWWDA], 1400 East Touhy Avenue, Des Plaines, IL 60018 (c) The Department will enforce the listed editions of material incorporated by reference into this standard. If a later edition is to be enforced, the Department will publish a notice of change in the [47 FR 49385, Nov. 1, 1982, as amended at 52 FR 47553, Dec. 15, 1987; 58 FR 55002, Oct. 25, 1993; 59 FR 15113, Mar. 31, 1994; 70 FR 72042, Nov. 30, 2005]
Title 24: Housing and Urban Development
PART 3280—MANUFACTURED HOME CONSTRUCTION AND SAFETY STANDARDS
Subpart A—General
§ 3280.4 Incorporation by reference.
