US LAWS, STATUTES & CODES ON-LINE

(d) Computation of tax. The tax is computed by applying to the price for which the article is sold the applicable rate. For definition of the term “price” see section 4216 of the Code and the regulations contained in subpart J of this part.

(e) Liability for tax. The tax imposed by section 4181 of the Code is payable by the manufacturer, producer, or importer making the sale.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–404, 63 FR 52603, Oct. 1, 1998]

(a) Firearms subject to the National Firearms Act. Section 4182(a) provides that the tax imposed by section 4181 of the Code shall not attach to the sale of any firearms on which the tax imposed by section 5811 of the Code (relating to tax on the transfer of machine guns, short-barreled firearms, and other weapons) has been paid. Any manufacturer, producer, or importer claiming such an exemption from the tax imposed by section 4181 of the Code must maintain such records and be prepared to produce such evidence as will establish the right to the exemption.

(b) Sales to Defense Department or to U.S. Coast Guard—(1) Military department. Section 4182(b) of the Code provides that the tax imposed by section 4181 of the Code shall not attach to the sale of firearms, pistols, revolvers, shells, or cartridges that are purchased with funds appropriated for a military department of the United States. For this purpose, the term “military department” means the Department of the Army, the Department of the Navy, and Department of the Air Force. Included in the Department of the Navy are naval aviation and the Marine Corps.

(2) Coast Guard. Section 655, title 14, U.S.C., provides that no tax on the sale or transfer of firearms, pistols, revolvers, shells, or cartridges may be imposed on such articles when bought with funds appropriated for the United States Coast Guard.

(3) Supporting evidence. Any manufacturer, producer, or importer claiming an exemption from the tax imposed by section 4181 of the Code by reason of section 4182(b) and section 655, title 14 of the Code must maintain such records and be prepared to produce such evidence as will establish the right to the exemption. Generally, clearly identified orders or contracts of a military department signed by an authorized officer of the military department will be sufficient to establish the right to the exemption. In the absence of such orders or contracts, a statement, signed by an authorized officer of a military department or the Coast Guard, that the prescribed articles were purchased with funds appropriated for that military department or the Coast Guard will constitute satisfactory evidence of the right to an exemption.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–344, 58 FR 40354, July 28, 1993]

For provisions relating to tax-free sales of firearms and ammunition see:

(a) Section 4221 and 27 CFR 53.131, “Tax-free sales; general rule”.

(b) Section 4223 and 27 CFR 53.132, “Tax-free sale of articles to be used for, or resold for, further manufacture”.

(c) Section 4222 and 27 CFR 53.140, “Registration”.

(a) In general. The “price” for which an article is sold includes the total consideration paid for the article, whether that consideration is in the form of money, services, or other things. However, for purposes of the taxes imposed under chapter 32 of the Code, certain collateral charges made in connection with the sale of a taxable article must be included in the taxable sale price, whereas others may be excluded. Any charge which is required by a manufacturer, producer, or importer to be paid as a condition of its sale of a taxable article and which is not attributable to an expense falling within one of the exclusions provided in section 4216 of the Code or the regulations thereunder is includable in the taxable sale price. It is immaterial for this purpose that the charge may be paid to a person other than the manufacturer, producer, or importer, or that it may be separately billed to the purchaser as a charge earmarked for expenses incurred or to be incurred in his behalf, such as charges for demonstration or display of the article, for sales promotion programs, or otherwise. With respect to the rules relating to exclusion of charges for local advertising of a manufacturer's products, see section 4216(e) of the Code and §53.100. In the case of sales on credit, a carrying, finance, or service charge is excludable from the sale price if it is reasonably related to the costs of carrying the deferred portion of the sale price (such as interest on the deferred portion of the sale price, expenses of bookkeeping necessary to keep the records of such sales, and expenses of correspondence and other communication in connection with collection).

(b) Tools and dies. Separate charges for tools and dies used in the manufacture or production of a taxable article are to be included, in whole or in part, in the sale price on which the tax is based. It is immaterial whether the charges for such items are billed in a lump sum or are amortized or allocated to each of the taxable articles. If, at the termination of a contract to manufacture taxable articles, the tools and dies used in production pass to the purchaser, only the amount of depreciation of the tools and dies incurred in production, computed on a “production output” basis, should be included in the sale price. If the purchaser furnishes the tools and dies, the amount of the cost thereof, to the extent that such cost has been depreciated in the production of the taxable articles (computed on a “production output” basis), shall be included in determining the sale price of the articles for purposes of computing the tax.

(c) Charges for warranty. A charge for a warranty of an article which the manufacturer, producer, or importer requires the purchaser to pay in order to obtain the article shall be included in the sale price of the article on which the tax is computed. On the other hand, a charge for a warranty of a taxable article paid at the purchaser's option shall not be included in the sale price for purposes of computing tax thereon.

(d) Charges for coverings, containers, and packing. Any charge by the manufacturer, producer, or importer for coverings and containers of whatever nature used to pack an article for shipment shall be included as part of the sale price for the purpose of computing the tax, whether or not the charges are identified as such on the invoice or are billed separately. Even though there is an agreement that the manufacturer, producer, or importer will repay all or a portion of the charge for the coverings or containers upon the return thereof, the full charge nevertheless shall be included in the sale price. It is immaterial whether the charge made at the time of sale is more or less than the actual value of the covering or container. See §53.173(b)(4) for provisions relating to the claiming of a credit or refund in the case of a price readjustment due to the return or repossession of a covering or container. Packing charges are to be included in the sale price whether the charges cover normal packing or special packing services, such as for extra protection of the article or for odd-lot quantities. This rule shall apply whether the packing services are initiated by the manufacturer, producer, or importer or are furnished at the request of the purchaser and whether the packing is performed by the manufacturer, producer, or importer or by another person at his request. If the purchaser supplies packing materials, the fair market value of such materials must be included in the tax base when computing tax liability on the sale of the article.

(e) Taxable and nontaxable articles sold as a unit. Where a taxable article and a nontaxable article are sold by the manufacturer as a unit, the tax attaches to that portion of the manufacturer's sale price of the unit which is properly allocable to the taxable article. Normally, the taxable portion of such a unit may be determined by applying to the manufacturer's sale price of the unit the ratio which the manufacturer's separate sale price of the taxable article bears to the sum of the sale prices of both the taxable and nontaxable articles, if such articles are sold separately by the manufacturer. Where the articles (or either one of them) are not sold separately by the manufacturer and do not have established sale prices, the taxable portion is to be determined from a comparison of the actual costs of the articles to the manufacturer. Thus, if the cost of the taxable article represents four-fifths of the total cost of the complete unit, the tax applies to four-fifths of the price charged by the manufacturer for the unit.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31083, July 9, 1991]

(a) Tax—(1) Tax not part of taxable sale price. The tax imposed by chapter 32 of the Code on the sale of an article is not part of the taxable sale price of the article. Thus, if a manufacturer computes the tax on a sale price which is determined without regard to the tax, and it charges the proper tax as a separate item, the amount of tax so charged does not become a part of the taxable sale price and no tax is due on the tax so charged. Where no separate charge is made as tax, it will be presumed that the price charged to the purchaser for the article includes the proper tax, and the proper percentage of such price will be allocated to the tax.

(2) Computation of tax. If an article subject to tax at the rate of 10 percent is sold for $100 and an additional item of $10 is billed as tax, $100 is the taxable selling price and $10 is the amount of tax due thereon. However, if the article is sold for $100 with no separate billing or indication of the amount of the tax, it will be presumed that the tax is included in the $100, and a computation will be necessary to determine what portion of the total amount represents the sale price of the article and what portion represents the tax. The computation is as follows:

Thus, if the tax rate is 10 percent and the sale price including tax is $100, the taxable sale price is $90.91 (that is, $100 divided by (100+10)), and the tax is 10 percent of $90.91, or $9.09.

(b) Transportation, delivery, insurance, or installation charges—(1) Charges incurred pursuant to sale. Charges for transportation, delivery, insurance, installation, and other expenses actually incurred in connection with the delivery of an article to a purchaser pursuant to a bona fide sale shall be excluded from the sale price in computing the tax. Such charges include all items of transportation, delivery, insurance, installation, and similar expense incurred after shipment to a customer begins, in response to the customer's order, pursuant to a bona fide sale. However, costs of such nature incurred by a manufacturer, producer, or importer in transporting, in the normal course of business and for its benefit and convenience, articles from a factory or port of entry to a warehouse or other facility (regardless of the location of such warehouse or facility) are not considered as being incurred in connection with the delivery of an article to a purchaser pursuant to a bona fide sale, and charges therefor cannot be excluded from the sale price in computing tax liability. Similarly, an allowance granted by a manufacturer as reimbursement for expenses incurred by the purchaser in shipping used articles to the manufacturer for credit against the purchase price of taxable articles shall not be excluded from the sale price when computing tax due on the sale of the taxable articles. In any event, no charge may be excluded from the sale price unless the conditions set forth in paragraph (b)(2) of this section are complied with. Said conditions are prescribed under the authority granted the Secretary in section 4216(a) of the Code.

(2) Only actual expenses to be excluded. Where a separate charge is made for transportation or other expenses incurred in connection with the delivery of an article to the purchaser pursuant to a bona fide sale, there shall be excluded in arriving at the sale price subject to tax only that portion of the charge which represents the actual expenses incurred for the transportation or other excludable expenses. Where a separate charge is less than the actual expense, the difference is presumed to be included in the billed price. Such difference, together with the separate charge, shall be excluded in arriving at the sale price on which the tax is computed. Similarly, where no separate charge is made but the manufacturer, producer, or importer incurs an expense of the type to which this paragraph has application, the amount of such expense actually incurred shall be excluded from the sale price on which the tax is computed. Where transportation expense is incurred in conjunction with a shipment composed of both taxable and nontaxable articles, only the portion of the expense allocable to the taxable articles shall be excludable. In general, unless the taxpayer establishes to the satisfaction of the appropriate TTB officer that another method reasonably apportions such freight expense between taxable and nontaxable articles, such expense should be apportioned on the basis of the relative weights (or, if available, the relative published tariff rates) applicable to the taxable and nontaxable articles. Where it is not feasible to apportion such expense on the basis of relative weights or tariff rates, the expense shall be apportioned on another reasonable basis; for example, in the case of a shipment including both taxable and nontaxable articles which are subject to the same tariff rate, it may be appropriate to apportion the transportation expense on the basis of the relative sale prices. A charge for insurance in connection with the delivery of an article to a purchaser is considered to represent an expense actually incurred only to the extent that an amount equivalent to such charge is paid or payable by the manufacturer to a person authorized to assume such insurance risk.

(3) Transportation, delivery, or installation services performed by manufacturer. For purposes of computing the taxable sale price of articles, it is immaterial whether the transportation, delivery, or other services of the type to which this paragraph has application are performed by a common carrier or independent agency for or on behalf of the manufacturer, producer, or importer, or are performed by the manufacturer, producer, or importer with the use of its own vehicles or other facilities. Thus, where a manufacturer, producer, or importer performs the transportation, delivery, or other services with its equipment, tools, employees, etc., the cost of such services allocable to the sale of the taxable article shall be excluded. In determining whether an expense is an excludable transportation or delivery expense, only those expenses incurred by reason of the fact that the purchaser accepts delivery at some point other than the manufacturer's place of business shall be considered excludable transportation or delivery expenses. All expenses incurred in placing an article packed, ready for shipment on the loading dock at the manufacturer's factory are not excludable transportation or delivery expenses. An allowance granted by the manufacturer, producer, or importer to the purchaser for transportation, delivery, or other expenses incurred or to be incurred by the purchaser in connection with the sale shall be excluded in computing the taxable sale price, if charges for similar expenses would be excludable if incurred by the manufacturer.

(4) Records in support of exclusion. Every manufacturer, producer, or importer making sales of taxable articles shall keep records which will disclose the amount of transportation, delivery, insurance, installation or other expense actually incurred by it in connection with the delivery of a taxable article to a purchaser pursuant to a bona fide sale.

(c) Other charges. A charge or expense not within the scope of paragraph (a) or (b) of this section, whether or not separately stated, may not be excluded in computing the taxable sale price unless it can be shown by adequate records that the charge or expense is not properly included as a manufacturing or selling expense or is in no way incidental to placing the article in condition packed ready for shipment. Commissions to manufacturers' agents, or allowances, payments, or adjustments made to, and for the benefit of, persons other than the purchaser may not be excluded or deducted, under any condition, in computing the sale price upon which the tax is computed.

(a) Exchanges. If, in connection with the sale of an article subject to a tax imposed under chapter 32 of the Code on the price for which sold, a manufacturer receives from its vendee another article in exchange, the tax on the manufacturer's sale shall be computed on the basis of the amount allowed for the article received from the vendee, plus any additional amount charged the vendee.

(b) Replacements under warranty. If an article, subject to a tax imposed under chapter 32 of the Code on the price for which sold, is returned to the manufacturer by reason of the failure of the article under a warranty as to its quality or service, and a new article is given by the manufacturer, free, or at a reduced price, the tax on the new article shall be computed on the actual amount, if any, to be paid to the manufacturer for the new article. See §53.174(b) for the circumstances under which the allowance made by the manufacturer, producer, or importer upon the return of the first article constitutes a price readjustment of the sale price of the first article and the extent, if any, to which a credit may be allowed, or refund made, of the tax paid by the manufacturer, producer, or importer on the sale of the first article.

(c) Readjustments in sale price. Readjustment in sale price (such as allowable discounts, rebates, bonuses, etc.) cannot be anticipated. The tax must be based upon the original price unless the readjustments have actually been made prior to the close of the period for which the tax upon the sale is returned. However, if the price upon which the tax was computed is subsequently readjusted, credit may be taken against the tax due on a subsequent return or a claim for refund filed as provided by section 6416(b)(1) of the Code and §§53.174–53.176.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–344, 58 FR 40354, July 28, 1993]

(a) In general. Section 4216(b) of the Code pertains to those taxes imposed under chapter 32 of the Code that are based on the price for which an article is sold, and contains the provisions for constructing a tax base other than the actual sale price of the article, under certain defined conditions.

(b) Specific applications. (1) Section 4216(b)(1) of the Code applies to:

(i) Arm's-length sales at retail or on consignment, other than those sales at retail and to retailers to which section 4216(b)(2) of the Code and §53.96 apply; and

(ii) Sales otherwise than at arm's length, and at less than fair market price.

(2) Section 4216(b)(2) of the Code applies generally to arm's-length sales of an article at retail or to retailers, or both, where the manufacturer also sells the same article to wholesale distributors.

(3) Section 4216(b)(3) of the Code provides a formula for determining a constructive sale price for sales of taxable articles between members of an affiliated group of corporations (as “affiliated group” is defined in section 1504(a) of the Code) in those instances where the purchasing corporation regularly resells to retailers but does not regularly resell to wholesale distributors, and except for situations where section 4216(b)(4) of the Code applies.

(4) Section 4216(b)(4) of the Code provides a special method for computing a constructive sale price for sales of taxable articles between affiliated corporations where the purchasing corporation sells only to retailers, and the normal method of selling within the industry is for manufacturers to sell to wholesale distributors.

(c) Definitions. For purposes of section 4216(b) of the Code and §§53.94–53.97 and unless otherwise indicated:

(1) Sale at retail. A “sale at retail,” or a “retail sale”, is a sale of an article to a purchaser who intends to use or lease the article rather than resell it. The fact that articles are sold in wholesale lots, or at wholesale prices, will not change the character of such sales as “sales at retail” if the purchaser is not engaged in the business of reselling such articles, and acquires them for the purpose of using them rather than reselling them.

(2) Retail dealers. A “retail dealer”, or “retailer”, is a person engaged in the business of selling articles at retail.

(3) Wholesale distributor. The term “wholesale distributor” means a person engaged in the business of selling articles to persons engaged in the business of reselling such articles.

(a) In general. Section 4216(b)(1) of the Code sets forth the conditions that require the Secretary to construct a sale price on which to compute a tax imposed under chapter 32 of the Code on the price for which an article is sold. The section requires a constructive sale price to be established where a taxable article is:

(1) Sold at retail;

(2) Sold while on consignment; or,

(3) Sold otherwise than through an arm's-length transaction at less than fair market price.

(b) Sales at retail. Section 4216(b)(1)(A) of the Code relates to the determination of a constructive sale price for sales of taxable articles sold at arm's-length and at retail. In the case of such sales, the constructive sale price is the highest price for which such articles are sold to wholesale distributors, in the ordinary course of trade, by manufacturers or producers thereof, as determined by the Secretary. If the constructive sale price is less than the actual sale price, the constructive sale price shall be used as the tax base. If the constructive sale price is not less than the actual sale price, the actual sale price shall be considered as not less than fair market, and shall be used as the tax base. In determining the highest price for which articles are sold by manufacturers to wholesale distributors, there must be taken into consideration the normal industry practices with respect to inclusions and exclusions under section 4216(a) of the Code. However, once a constructive sale price has been determined by the Secretary, no further adjustment of such price shall be made. The provisions of section 4216(b)(1)(A) of the Code and this paragraph shall not apply in those instances where the provisions of section 4216(b)(2) of the Code and §53.96 apply.

(c) Sales on consignment. As in the case of sales at retail, the constructive sale price for sales on consignment shall be the price for which such articles are sold, in the ordinary course for trade, by manufacturers or producers thereof, as determined by the Secretary. For purposes of section 4216(b)(1)(B) of the Code and this paragraph, an article is considered to be sold on consignment if it is sold while it is on consignment to a person which has the right to sell, and does sell, such article in its own name, but never receives title to the article from the manufacturer. Ordinarily, the constructive sale price of an article sold on consignment is the net price received by the manufacturer from the consignee. The provisions of section 4216(b)(1)(B) of the Code and this paragraph shall not apply if the provisions of section 4216(b)(2) of the Code and §53.96 apply.

(d) Sales not at arm's-length. For purposes of section 4216(b)(1)(C) of the Code and this paragraph, a sale is considered to be made under circumstances otherwise than at “arm's-length” if:

(1) One of the parties is controlled (in law or in fact) by the other, or there is common control, whether or not such control is actually exercised to influence the sale price, or

(2) The sale is made pursuant to special arrangements between a manufacturer and a purchaser.

In case of an article sold otherwise than at arm's-length, and at less than fair market price, the constructive sale price shall be the price for which such articles are sold, in the ordinary course of trade, by manufacturers or producers thereof, as determined by the Secretary. Once such a constructive sale price has been determined, no further adjustment of such price shall be made. See sections 4216(b) (3) and (4) of the Code, and §53.97, for specific methods for determining constructive sale prices for intercompany sales under certain defined conditions.

(a) In general. Section 4216(b)(2) of the Code provides a special rule under which a manufacturer shall determine a constructive sale price for this sale of taxable articles at retail, and to retail dealers, under certain conditions. The rule is applicable where:

(1) The manufacturer regularly sells such articles at retail, or to retailers, or both, as the case may be,

(2) The manufacturer also regularly sells such articles to one or more wholesale distributors in arm's-length transactions, and the manufacturer establishes that its prices in such cases are determined without regard to any benefit to be derived under section 4216(b)(2) of the Code, and

(3) The transactions are arm's-length transactions.

(4) A manufacturer meeting the foregoing requirements shall base its tax liability for sales at retail and sales to retailers on the lower of its actual sale price or the highest price for which it sells the same articles under the same conditions to wholesale distributors.

(b) Definitions. For purposes of section 4216(b)(2) of the Code and this section:

(1) Actual sale price. “Actual sale price” means the actual selling price for an article determined in the same manner as sale price is determined for a taxable sale. Accordingly, such price must reflect the inclusions and exclusions set forth in section 4216(a) of the Code, and any price adjustments described in section 6416(b)(1) of the Code.

(2) Highest price to wholesale distributors. The “highest price” charged wholesale distributors for an article by a manufacturer, producer, or importer thereof, is the highest price at which the manufacturer, producer, or importer sells the article to wholesale distributors, determined without regard to quantity. Such price shall be determined in the same manner as sale price is determined for a taxable sale with respect to the inclusions and exclusions under section 4216(a) of the Code; however, since the price is to be a “highest” price, no further adjustment may be made for price readjustments under section 6416(b)(1) of the Code.

(3) Regular sales. An article is considered to be sold “regularly” at retail or to retailers if sales are made at retail or to retailers periodically and recurringly as a regular part of the seller's business. If a seller makes only isolated or casual sales of an article at retail or to retailers, it is not considered to be selling “regularly” at retail or to retailers. Similarly, a manufacturer is considered to be making regular sales of an article to one or more distributors if it sells the article to at least one distributor periodically and recurringly as a regular part of its business.

(4) Normal method of sales in industry. In the absence of a showing to the appropriate TTB officer of a more appropriate manner of determining the normal method of sales within an industry which is practical in application, the normal method of sales within an industry shall be regarded as not being at retail or to retailers, or both, if the industry dollar volume of sales which are at retail or to retailers, or both, is less than half the total industry dollar volume of sales at all levels of distribution by manufacturers, producers, or importers, including sales to other manufacturers, producers, or importers.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31083, July 9, 1991]

(a) In general. Sections 4216(b) (3) and (4) of the Code establish procedures for determining a constructive sale price under section 4216(b)(1)(C) of the Code for sales between corporations that are members of the same “affiliated group”, as that term is defined in section 1504(a) of the Code.

(b) Sales to which section 4216(b)(3) of the Code applies. Section 4216(b)(3) of the Code provides a procedure for determining a constructive sale price under section 4216(b)(1)(C) of the Code in those instances where:

(1) A manufacturer, producer or importer regularly sells a taxable article to a wholesale distributor which is a member of the same affiliated group as the manufacturer, producers or importer, and

(2) The wholesale distributor regularly sells such article to one or more independent retailers, but does not regularly sell to wholesale distributors. Under such circumstances the constructive sale price for the article shall be an amount equal to 90 percent of the lowest price for which the distributor regularly sells the article in arm's-length transactions to such independent retailers. Once the constructive sale price has been determined, no adjustment shall be made for inclusions or exclusions under section 4216(a) of the Code or price readjustments under section 6416(b)(1) of the Code. If both sections 4216(b)(3) and 4216(b)(4) of the Code apply with respect to the sale of an article, the constructive sale price for such article shall be the lower of the prices computed under sections 4216(b)(3) and 4216(b)(4).

(c) Sales to which section 4216(b)(4) of the Code applies. Section 4216(b)(4) of the Code provides a procedure for determining a constructive sale price under section 4216(b)(1)(C) of the Code in those instance where:

(1) A manufacturer, producer, or importer regularly sells (except for tax-free sales) a taxable article only to a wholesale distributor which is a member of the same affiliated group as the manufacturer, producer, or importer,

(2) The distributor regularly sells (except for tax-free sales) such article only to retail dealers, and

(3) The normal method of sales for such articles within the industry is to sell such articles in arm's-length transactions to wholesale distributors.

(4) Under section 4216(b)(4) of the Code, the constructive sale price of such article shall be the median price at which the distributor, at the time of the sale by the manufacturer, resells the article to retail dealers, reduced by a percentage of such price equal to the percentage which:

(i) The difference between the median price for which comparable articles are sold to wholesale distributors, in the ordinary course of trade, by manufacturers of producers thereof, and the median price at which such wholesale distributors in arm's-length transactions sell such comparable articles to retailers, is of

(ii) The median price at which such wholesale distributors in arm's-length transactions sell such comparable articles to retailers.

(iii) For purposes of this paragraph, the “median price” for which an article is sold at a particular level of distribution is the price midway between the highest and lowest prices charged vendees at the particular level of distribution. Where only one price is charged at a level of distribution, “median price” is equivalent to “actual price”. All sale prices referred to in paragraphs (c) and (d) of this section are prices that must reflect the inclusions and exclusions set forth in section 4216(a) of the Code. However, once a constructive sale price has been determined under these paragraphs, no further adjustment of such price is allowed.

(d) Application of section 4216(b)(4) of the Code. The application of section 4216(b)(4) of the Code and paragraph (c) of this section may be illustrated by the following example:

Example.  M, a corporation engaged in the manufacture of article X, sold 100 of such articles at $10.00 per article to a wholesale distributor N, a corporation engaged in the business of selling X articles to independent retail dealers. N is a member of the same affiliated group of corporations as M. M sells X articles only to N. The normal method of manufacturers' sales of X articles in the industry is to sell to independent wholesale distributors. N corporation sells X articles to retailers for $15.00 each. The price for which comparable X articles are sold to wholesale distributors in the ordinary course of trade by manufacturers thereof is $12.00 per article. Wholesale distributors sell X articles to retailers in the ordinary course of trade for $16.00 per article. Under the foregoing facts the constructive sale price determined under section 4216(b)(4) of the Code and this paragraph is $11.25, computed as follows:

(e) Determination of “lowest price”. In addition to other considerations, in determining a “lowest price” for purposes of sections 4216(b) (1) and (3) of the Code and §53.97, such price shall be determined:

(1) Without requiring that a given percentage of sales be made at that price (provided that the volume of sales made at that price is great enough to indicate that those sales have not been engaged in primarily to establish a lower tax base), and

(2) Without including any charge for a fixed amount that the purchaser has an unconditional right to recover on the basis of a contractual arrangement existing at the time of sale.

(f) Definitions. For purposes of this section and paragraphs (3) and (4) of section 4216(b) of the Code, the term “regularly sells” has the same meaning as that accorded the term “regular sales” in §53.96(b)(3), and the term “normal method of sales in the industry” has the same meaning as accorded that term in §53.96(b)(4).

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31083, July 9, 1991]

(a) Leases. When a taxable article is leased by a manufacturer, producer, or importer, liability for tax is incurred, except as provided by section 4217(b) of the Code and §53.104, on each payment made with respect to such lease. Tax is payable on each lease payment as long as the article is leased by the manufacturer, producer, or importer. The tax payable with respect to each lease payment is a percentage of each payment based on the rate of tax, if any, in effect on the date the lease payment is due. If the article is subsequently sold by the manufacturer, producer, or importer, the tax applies also to such sale, without regard to the tax paid when the article was leased. For definition of the term “lease”, see §53.103.

(b) Installment sales. When a taxable article is sold under an installment payment contract with title reserved in the seller, or under a conditional sale contract, chattel mortgage arrangement or other arrangement creating a security interest with payments to be made in installments, tax shall be computed and paid on each payment made by the purchaser. The tax payable with each payment is a percentage of each payment based on the rate of tax, if any, in effect on the date the payment is due. The part of each payment that is subject to tax is that portion of the payment equal to the percentage of the total portion of the payment equal to the percentage of the total charge for the article that is subject to tax. For example, if the total charge for the article is $1,000, and of the total amount charged only 90 percent thereof, or $900, is subject to tax by reason of exclusions, then only 90 percent of the installment payment is subject to tax. If the tax base is a constructive sale price computed under section 4216(b) of the Code that is less than the actual sale price of the article, the portion of each payment subject to tax is the percentage of such payment equal to the percentage that the constructive sale price bears to the actual sale price. For example, if an article is sold at retail for $100, and the constructive sale price for such an article computed under the provisions of section 4216(b)(1)(A) of the Code is $75, the percentage which the constructive sale price bears to the actual sale price is 75 percent. Accordingly, only 75 percent of each installment payment is subject to tax.

(c) Sales on credit. Where articles are sold on credit under conditions other than those specified in paragraph (b) of this section, the entire tax shall be reported and paid with the return covering the period in which the sale is made, even though the price may not be paid to the manufacturer, producer, or importer until a later date, or not paid at all.

(a) In general. Except as provided in paragraph (d) of this section, in case of a sale or other disposition by a manufacturer, producer, or importer of an installment account of the type specified in section 4216(c) of the Code, the tax shall not apply to subsequent installment payments on such account. Instead, there shall be paid an amount equal to the difference between the tax previously paid on such installment account and the total tax computed by applying:

(1) To each installment due before the sale of the installment account, the rate of tax applicable at the time payment thereof was due, and

(2) To each installment, the time for payment of which has not arrived, the rate of tax which, under the provisions of chapter 32 of the Code as in effect on the date of the sale of the installment account, is (or is to be) in effect on the date such installment is due. However, see paragraph (b) of this section if the sale is made in a bankruptcy or insolvency proceeding. The tax due under this paragraph shall be included in the return for the period in which the account is sold.

(b) Sale in bankruptcy or insolvency proceeding. In the case of a sale of an installment account of a manufacturer, producer, or importer pursuant to the order of, or subject to the approval of, a court of competent jurisdiction in a bankruptcy or insolvency proceeding, the amount of tax due shall be computed and paid as provided in paragraph (a) of this section but shall not exceed the amount of tax computed by multiplying:

(1) The proportionate share of the amount for which such accounts are sold which is allocable to each unpaid installment payment, by

(2) The rate of tax which, under the provisions of chapter 32 of the Code as in effect on the date of the sale of the installment account, is (or is to be) in effect on the date such payment is due.

(c) Collection of installment accounts on behalf of the manufacturer. Where a manufacturer, producer, or importer retains title to an installment account but turns it over to another person for collection on a fee basis, no sale of such account (or other disposition as contemplated in section 4216(d) of the Code) has been made. The tax shall continue to be paid as provided by section 4216(c) of the Code.

(d) Returned installment accounts. Where an installment account which has been sold or otherwise disposed of is returned to the manufacturer, producer, or importer who sold it under an agreement under which the account was sold, and credit or refund has been allowed under section 6416(b)(5) of the Code and §53.183, the manufacturer, producer, or importer shall pay tax as provided by section 4216(c) of the Code and §53.98 on any subsequent payments made on such returned installment account until such time as there shall have been paid the total tax liability with respect to the account as computed under paragraph (a) of this section.

(e) Limitation. The sum of the amounts payable under this section and §53.98 or an installment account shall not exceed the total amount of tax which would be payable if such installment account had not been sold or otherwise disposed of (computed as provided in subsection (c)).

(a) In general. Section 4216(e) of the Code deals with the treatment to be accorded charges made by a manufacturer for, and reimbursements by a manufacturer or expenditures in connection with the advertising of certain articles subject to excise tax under chapter 32 of the Code. Section 4216(e) of the Code provides an exclusion (which is in addition to the exclusions provided by section 4216(a) of the Code and §53.92) in respect of charges for local advertising, as defined in paragraph (b) of this section, for purposes of determining the price for which an article is sold. See paragraph (c) of this section. The exclusion provided by section 4216(e) of the Code and paragraph (c) of this section has application only if the advertising is broadcast over a radio or television station, appears in a newspaper or magazine, or is displayed by means of an outdoor advertising sign or poster. Section 4216(e) of the Code also provides an overall limitation in respect of the sum of the amount of the exclusions from price as charges for local advertising and the amount of the readjustments authorized under section 6416(b)(1) of the Code (relating to credits or refunds for price readjustments) in respect of reimbursements by a manufacturer of expenditures for local advertising. See §53.101. For provisions prohibiting exclusion from price or readjustment of price in respect of charges for, and reimbursements of expenditures for, advertising other than local advertising, see §53.102.

(b) Definition of local advertising—(1) In general. For purposes of the regulations under sections 4216(e) and 6416(b)(1) of the Code (§§53.100–53.102 and 53.173–53.176), the term “local advertising” means advertising which relates to an article with respect to which tax is imposed under chapter 32 of the Code on the price for which sold and which:

(i) Is initiated or obtained by the purchaser or any subsequent vendee,

(ii) Names the article for which the price is determinable under section 4216 and states the location at which such article may be purchased at retail, and

(iii) Is broadcast over a radio station or television station, appears in a newspaper or magazine, or is displayed by means of an outdoor advertising sign or poster.

(2) Initiating or obtaining advertising. For purposes of paragraph (b)(1) of this section, the advertising must be initiated or obtained by one or more of the persons in the chain of distribution of the article (wholesale distributor, jobber, dealer, etc.) who purchased the article for resale. For purposes of this subparagraph, the manufacturer is not considered to be one of the persons in the chain of distribution of the article. In general, advertising of an article is considered to be initiated or obtained by one or more persons in the chain of distribution of the article if any such person:

(i) Takes an active part in the actual planning and development, or in the arrangements or negotiations leading to the development, of the form and content of the advertising, or

(ii) Contracts for the placement of the advertising.

The participation by the manufacturer of the article in the planning, development, or placement of the advertising is immaterial provided the advertising is in fact initiated or obtained by one or more persons in the chain of distribution of the article. Furthermore, it is immaterial whether or not the advertising is subject to the approval of the manufacturer of the article. However, if no person in the chain of distribution of the article takes an active part in the actual planning and development, or in the arrangements or negotiations leading to the development, of the form and content of the advertising, but, rather, all such planning, development, arrangements, and negotiations are accomplished by the manufacturer of the article, then such manufacturer is considered to have initiated the advertising, and if he also contracts for the placement of the advertising, such advertising does not qualify as “local advertising”.

(3) Identification of article and sales location. To meet the requirements of paragraph (b)(1) of this section, the advertising must identify the article for which the price is determinable under section 4216 of the Code and give the location or locations at which the article may be purchased at retail. All products taxable at the same rate under the same section of chapter 32 of the Code shall be considered to be an “article” for purposes of the preceding sentence. No specific method or means of identification is prescribed. The identification of the article may be made through the use of the name of the manufacturer or the use of an established trade-mark, such as a seal, picture, letter or letters, etc., or a combination thereof. The advertising must identify the particular retail establishment or establishments at which the article may be purchased at retail but need not specify the location of any such establishment in terms of the number by which the premises are designated or the name of the street on which the retail premises are situated. However, the location of the retail premises must be described sufficiently, as, for example, by reference to a particular named shopping area or shopping center, to enable customers to find the retail establishment.

(4) Determination of costs of local advertising. Where an advertisement identifies more than one article, and all such articles are not taxable, or are not taxable at the same rate under the same section of chapter 32 of the Code, a reasonable allocation of the cost of the advertisement must be made among:

(i) Articles taxable at the same rate under the same section of the Code, and

(ii) Articles which are not taxable under chapter 32 of the Code.

For example, in the case of a single page newspaper or magazine advertisement, an allocation of costs reflecting the lineage or space devoted to the specified categories will be considered to reflect a reasonable allocation of the cost of advertising the different articles. As a general rule, only the cost of the “spot” portion identifying the retail establishment is considered “local advertising” in the case of national television or radio programs.

(5) Meaning of “newspaper”. The term newspaper, as used in paragraph (b)(1) of this section, is limited to those publications which are commonly understood to be newspapers and which are printed and distributed periodically at daily, weekly, or other short intervals for the dissemination of news of a general character and of a general interest. The term does not include handbills, circulars, flyers, or the like, unless printed and distributed as a part of a publication which constitutes a newspaper within the meaning of this subparagraph. Neither does the term include any publication which is issued to supply information on certain subjects of interest to particular groups unless such publication otherwise qualifies as a newspaper within the meaning of this subparagraph. For purposes of this subparagraph, advertising is not considered to be news of a general character and of a general interest.

(6) Meaning of “magazine”. The term magazine, as used in paragraph (b)(1) of this section, is limited to those publications which are:

(i) Commonly understood to be magazines,

(ii) Printed and distributed periodically at least twice a year, and

(iii) Published for the dissemination of information of a general nature or of special interest to particular groups.

(iv) The term does not include handbills, circulars, flyers or the like, unless printed and distributed as a part of a publication which constitutes a magazine within the meaning of this subparagraph. For purposes of this subparagraph, advertising is not considered to be information of a general nature or information of special interest to particular groups within the contemplation of paragraph (b)(6)(iii) of this section.

(7) Meaning of “outdoor advertising sign or poster”. The term “outdoor advertising sign or poster”, as used in paragraph (b)(1) of this section, means a sign or poster displaying advertising matter, which is located outside of a roofed enclosure. This term includes both signs or posters on billboards, whether placed on or affixed to land, buildings, or other structures, and those which are displayed on or attached to moving objects, provided the signs or posters are located outside of a roofed enclosure. The term “roofed enclosure” means a roof structure which is enclosed on more than one-half of its sides by walls, fences, or other barriers.

(c) Exclusion—(1) Conditions and limitations. A charge for local advertising which is required by a manufacturer to be paid as a condition to his sale of an article is not a part of the taxable price of the article, to the extent that such charge meets each of the following conditions and limitations:

(i) Such charge does not exceed 5 percent of the difference between:

(A) An amount which would constitute the taxable price of the article (computed at the time of the sale of the article) if no part of any charge for local advertising were excludable in computing taxable price, and

(B) The amount of any separate charge for local advertising, whatever the amount of such charge may be,

(ii) Such charge is specifically shown as a separate charge for local advertising on the invoice or statement covering the sale of the article.

(iii) Such charge is billed by the manufacturer with the intention on his part of repaying the amount of the charge to the person purchasing the article from him, or to any person who subsequently purchases the article for resale, in reimbursement of costs incurred for local advertising of such article or some other article or articles taxable at the same rate under the same section of the Code. In the absence of evidence to the contrary, the fact of such intention will be assumed in all cases where the manufacturer and his vendees are parties to an advertising plan which calls for such repayments, or the manufacturer can otherwise establish that the vendees to whom he bills such charges understand and expect that such repayments will be made.

(2) When exclusion ceases to apply. To the extent that charges for local advertising meet the conditions and limitations stated in paragraph (c)(1) of this section, such charge is excludable in computing the taxable price of the article in respect of which the charge was made. However, the exclusion will cease to apply in respect of any part of such charge which the manufacturer fails to repay before May 1 of the calendar year following the calendar year in which the article was sold, to the person who purchased the article from him, or to some other person who subsequently purchases the article for resale, in reimbursement of costs incurred for local advertising of such article or some other article or articles taxable at the same rate under the same section of the Code. If, before such May 1, any part of the charge so excluded has not been so repaid, the manufacturer becomes liable for tax on such May 1 in the same manner as if an article taxable under such section of the Code had been sold by him on such May 1 at a taxable price equivalent to that part of the charge not so repaid. However, see paragraph (b)(2) of §53.175, relating to price readjustments in cases where local advertising charges are not repaid before such May 1 but are subsequently paid over by the manufacturer to his vendees in reimbursement of costs for local advertising. For provisions relating to the method of determining whether a payment by a manufacturer is or is not attributable to an excluded local advertising charge, see paragraph (b)(3) of §53.101. In any case where the payment is determined to be attributable to such a charge, the date of the sale in connection with which the charge was made shall be determined on a first-in-first-out basis in respect of the vendee to whom the charge was billed by the manufacturer.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31083, July 9, 1991]

(a) In general. The sum of the amount excluded from taxable price in respect of charges for local advertising, as provided in section 4216(e)(1) of the Code and §53.100, plus the amount of the readjustments for which credits or refunds may be claimed in respect of local advertising, as provided in section 6416(b)(1) of the Code and §53.175, is subject to an overall 5 percent limitation. This limitation applies to each manufacturer, as of the close of each calendar quarter, in respect of all articles taxable under the same section of chapter 32 of the Code which were sold by such manufacturer in such quarter (and the preceding quarter or quarters, if any, in the calendar year).

(b) Computation of overall 5 percent limitation—(1) In general. The limitation prescribed by section 4216(e)(2) of the Code (the “overall 5 percent limitation” referred to in paragraph (a) of this section) as to the total of the exclusions from price and readjustments of price which may be claimed for local advertising in respect of all articles taxable under the same section of Chapter 32 of the Code shall be computed as of the close of each calendar quarter of the calendar year. The overall 5 percent limitation is 5 percent of the difference between:

(i) The amount which would constitute the total taxable price (computed at the time of sale) of all articles taxable under the same section of chapter 32 of the Code sold by the manufacturer during the elapsed calendar quarters of the calendar year, if no part of any charge for local advertising were excludable in computing taxable price, and

(ii) The total of all amounts billed as separate charges for local advertising of such articles (whatever the amount of any single charge of the total of all charges).

(iii) In making the computations under paragraphs (b)(1) (i) and (ii) of this section, credits or refunds under section 6416(b) of the Code of tax paid on the sale of any such articles are to be disregarded and articles sold tax-free by the manufacturer are to be excluded. The amount by which the overall 5 percent limitation computed as of the close of a particular calendar quarter in respect of articles taxable under the same section of chapter 32 of the Code exceeds the sum of the charges for local advertising excluded in computing the taxable price and the amount of reimbursements for local advertising of such articles made during the elapsed calendar quarters of the calendar year, in respect of which credit or refund has been claimed, represents the unused portion of the overall 5 percent limitation. Such unused portion is the maximum amount of reimbursements for local advertising in respect of which credit or refund may be claimed at the close of the particular calendar quarter, subject to the applicable conditions and limitations governing the right to claim a credit or refund in respect of local advertising (see §53.175). The unused portion of the overall 5 percent limitation as of the close of the fourth calendar quarter of a calendar year in respect of which credit or refund may not be claimed as of the close of such quarter must be disregarded in computing the overall 5 percent limitation for any subsequent calendar quarter. Moreover, the amount of any reimbursements for local advertising made by a manufacturer in a calendar year which is in excess of the amount of such reimbursements in respect of which credit or refund may be claimed, within the overall limitation, as of the close of the calendar year, may not subsequently serve as the basis for a credit or refund.

(2) Alternative method of computation in certain cases. If during the portion of the calendar year ending with the date as of which the overall 5 percent limitation is being computed the amount of the local advertising charge separately billed by the manufacturer has not, in respect of any sale of any articles taxable under the same section of chapter 32 of the Code, exceeded the amount excludable pursuant to §53.100 in computing taxable price, the overall 5 percent limitation as of the close of a particular calendar quarter in respect of articles taxable under such section is 5 percent of the total taxable price (computed at the time of the sale) of all such articles sold taxpaid during the calendar year.

(3) Allocation of amounts paid in reimbursement of expenditures for local advertising. If a manufacturer makes contributions to a local advertising program in connection with which he makes excludable local advertising charges, it is necessary that reimbursements by the manufacturer for local advertising be attributed to the charges for local advertising, to the manufacturer's contributions, or allocated between them. Whether an amount paid by a manufacturer in reimbursement of expenses for local advertising is or is not a repayment of a local advertising charge which was excluded from taxable price under section 4216(e)(1) of the Code and §53.100, shall be determined on the basis of an allocation made under the agreement between the manufacturer and his vendee (or any subsequent vendee).

(c) Examples. The application of paragraphs (a) and (b) of this section may be illustrated by the following examples:

Example (1).  During the first and second calendar quarters of the year, a manufacturer makes sales of articles taxable under section 4181 to his distributors. The total charges for such sales, exclusive of the tax, transportation charges, delivery charges, or other charges which are excludable, pursuant to section 4216(a) of the Code, in computing taxable price, are as follows:

Example (2).  During the first calendar quarter of the year, a manufacturer sold articles taxable under section 4181 to his distributors at a total charge of $106,000, exclusive of the tax, transportation charges, delivery charges, or other charges which are excludable, pursuant to section 4216(a) of the Code, in computing taxable price. This total charge of $106,000 was billed as follows:

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

(a) Exclusions from price. No exclusion in computing the taxable price of any article sold by the manufacturer may be allowed in respect of any charge for advertising if, and to the extent that, such charge:

(1) Is for advertising which does not qualify as local advertising within the meaning of section 4216(e)(4) of the Code and paragraphs (a) and (b) of §53.100, or

(2) Does not satisfy all of the conditions and limitations stated in section 4216(e)(1) of the Code and paragraph (c) of §53.100.

(b) Readjustments of price. No credit or refund under section 6416(b)(1) of the Code may be allowed in respect of any amount which was included in the taxable price of an article sold by the manufacturer and which was later paid by him to his vendee in reimbursement of costs incurred for advertising, if, and to the extent that, the amount so paid:

(1) Is for advertising which does not qualify as local advertising within the meaning of section 4216(e)(4) of the Code and paragraph (b) of §53.100, or

(2) Is not within the limitation provided in section 4216(e)(2) of the Code, as computed in accordance with §53.101, as of the close of the calendar quarter in which the amount is so paid over or as of the close of any subsequent calendar quarter in the same calendar year. See, however, §53.175, relating to redetermination of price readjustments in cases where local advertising charges excluded from taxable price in one calendar year become taxable as of May 1 of the following calendar year.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

For purposes of chapter 32 of the Code, the lease of an article by a manufacturer, producer, or importer shall be considered a sale of the article. The term lease means a contract or agreement, written or verbal, which gives the lessee an exclusive, continuous right to the possession or use of a particular article for a period of time. The term includes any renewal or extension of a lease or any subsequent lease of the article.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991; T.D. 372, 61 FR 20724, May 8, 1996]

(a) Conditions for eligibility. Section 4217(b) of the Code provides for a limitation on the amount of tax that shall apply to the lease, any renewal, or further lease, of an article which, if sold, would be subject to tax on the basis of sale price. Such limitation on the amount of the tax applies with respect to the lease of an article only if, at the time of making the lease, the lessor is engaged in the business of selling in arm's length transactions the same type and model of article. In case of a lease to which section 4217(b) of the Code does not apply, tax shall be computed and paid as provided in section 4216(c) of the Code and paragraph (a) of §53.98.

(b) Lessor engaged in business of selling. The lessor will be regarded as being engaged in the business of selling in arm's length transactions the same type and model of an article as the one being leased if it periodically and recurringly makes bona fide offers for sale of such articles in the regular course of operation of its business, which offers if accepted would constitute sales at arm's length. Whether the offers are bona fide shall be determined on the basis of the facts in each case, such as sales actually made, the nature of the advertising, sales literature, and other means used to effectuate sales. It is not necessary that the offers for sale be made to the same class of purchasers as those to whom the article is being leased.

(c) Same type and model of article. To qualify as the “same type and model of article”, the article offered for sale must be an unused article essentially the same in size, design, and function as the article being leased. Slight differences in appearance or accessories will not render articles dissimilar which are identical in all other respects.

(d) Basis for tax—(1) Tax payable until total tax in paid. In case of a lease of an article to which section 4217(b) of the Code applies, tax shall be paid on each lease payment in an amount computed by applying to such lease payment a percentage equal to the rate of tax in effect on the date of the lease payment. Such tax payments shall continue to be made under such lease, or any subsequent lease of the article, until the cumulative total of the tax payments equals the total tax. Lease payments made thereafter with respect to that article shall not be subject to tax. For definition of the term “total tax,” see paragraph (e) of this section.

(2) Changes in tax rates. If the rate of tax is increased or decreased during a lease period, the new rate shall apply to the lease payments made on and after the date of the change, but the amount of the total tax shall remain the same.

(e) Total tax. For purposes of this section, the term “total tax” means the amount of tax, computed at the rate in effect on the date of the first lease of the article to which section 4217(b) of the Code applies, which would be due on the constructive sale price of the article as determined under section 4216(b) of the Code and §53.95, as if the article had been sold by a manufacturer at retail on such date.

(f) Sale of article before total tax becomes payable. If the lessor sells the article before the total tax has become payable, the tax payable on the sale shall be the lesser of the following amounts:

(1) The difference between:

(i) The total tax, and

(ii) The aggregate tax applicable to lease payments already received; or

(2) A tax computed, at the rate in effect on the date of the sale, on the price for which the article is sold. For purposes of (f)(2) of this section, the provisions of section 4216(b) of the Code for determining a constructive sale price shall not apply if the sale is at arm's length. If the sale is not at arm's length, the tax referred to in (f)(2) of this section shall be computed on a constructive sale price as provided in §53.95.

(g) Sale of article after total tax has become payable. If the lessor sells an article after the total tax has become payable, the tax imposed under chapter 32 of the Code shall not apply to such sale.

(a) In general. Section 4218 of the Code imposes tax in respect of certain uses of articles by the actual manufacturer, producer, or importer thereof. This section also applies in respect of the use of articles by any other person who, pursuant to a provision of chapter 32 of the Code, is considered to be, or is treated as, the manufacturer or producer of the articles. See, for example, section 4223 of the Code relating to articles purchased tax free for use in further manufacture.

(b) Taxable articles in general—(1) Application of tax. If the manufacturer, producer, or importer of an article taxable under chapter 32 of the Code uses the article for any purpose other than that indicated in paragraph (b) (3) of this section, he shall be liable for tax with respect to the use of such article in the same manner as if the article were sold by him.

(2) Taxable use in manufacturer of nontaxable articles—(i) In general. In the case of an article to which paragraph (b)(1) of this section applies, tax attaches when the manufacturer, producer, or importer of the articles uses it as material in the manufacture or production of, or as a component part of, another article which is not taxable under chapter 32 of the Code, regardless of the disposition made of such other article. (See paragraph (c) of §53.115 for computation of tax on such use.)

(ii) Types of use in manufacture of nontaxable articles. Taxable use may consist of the incorporation of a taxable article into a nontaxable article. Taxable use may also result from the combining of a taxable article (or the components thereof) with a nontaxable article (or the components of a nontaxable article) resulting in a combination end article which itself is not taxable. Although the taxable article may not be a completely separable unit, within the contemplation of the law a taxable article has been produced and incorporated in the combination end article.

(3) Nontaxable use in manufacturer of taxable articles. The tax on the use of an article to which paragraph (b)(1) of this section has application shall not apply if the article is used by the manufacturer, producer, or importer thereof as material in the manufacturer or production of, or as a component part of, another article taxable under chapter 32 of the Code to be manfactured or produced by him. It is immaterial what disposition is made of such other article.

(c) Use after lease. If the manufacturer, producer, or importer of a taxable article leases such article and thereafter uses the article, he incurs liability for tax on such use as provided in these regulations to the same extent as if the article were sold after being leased. See section 4217 of the Code and the regulations thereunder in this subpart for application and computation of tax in case of leased articles.

(d) Time of application of tax. In the case of a taxable use of an article by the manufacturer, producer, or importer thereof, the tax attaches at the time such use begins. If tax applies by reason of the sale of an article by the manufacturer, producer, or importer thereof on or in connection with his sale of another article, the tax attaches at the time of the sale of such other article.

(e) Exemptions because of other statutory provisions. Tax does not apply on the use of an article by the manufacturer, producer, or importer thereof if under the applicable provisions of the Code the sale of the article for a similar use would not be subject to tax. Also, tax need not be paid with respect to the use of an article by the manufacturer, producer, or importer thereof if such use would qualify, under the provisions of section 6416(b) of the Code, for credit or refund of the tax paid.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991]

Editorial Note:  At 56 FR 31084, July 9, 1991, §53.111 was amended by removing the word “manufacturer” and adding the word “manufacture” in the heading of paragraph (a)(2), and removing the word “manufacturer” and adding the word “manufacture” in the first sentence of paragraph (a)(3), effective July 9, 1991; however, these sub-paragraph designations are not included in §53.111(a). The issuing agency will publish a correction in the Federal Register at a later date.

§ 53.112   Business or personal use of articles.

(a) Business use. Section 4218 of the Code applies to the use by a person, in the operation of any business in which he is engaged, of a taxable article which has been manufactured, produced, or imported by him or his agent.

(b) Personal use. The tax on use of a taxable article does not attach in cases where an individual incidentially manufacturers, produces, or imports a taxable article for his personal use or causes a taxable article to be manufactured, produced, or imported for his personal use.

Liability for tax incurred on the use of an article is not extinguished or reduced because of any subsequent sale or lease of the article even if such sale or lease would have been exempt if the article had been so sold or leased prior to use. If a manufacturer, producer, or importer of an article incurs liability for tax on his use thereof, and thereafter sells or leases the article in a transaction which otherwise would be subject to tax, liability for tax is not incurred on such sale or lease.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

For purposes of section 4218 and §53.111, an article is used as material in the manufacture or production of, or as a component part of, another article, if it is incorporated in, or is a part or accessory of, the other article. In addition, an article is considered to be used as material in the manufacturer of another article if it is partly or entirely consumed in testing such other article; for example, shells or cartridges used in testing new firearms. Similarly, if an article is partly or wholly consumed in quality testing a production run of like articles, such article is also considered to have been used as material in the manufacture of another article. However, if a taxable article that has been used tax free and only partly consumed in testing is later sold, or put to a taxable use by the manufacturer, tax attaches to such sale or use. An article that is consumed in the manufacturing process other than in testing, so that it is not a physical part of the manufactured article, is not used as material in the manufacture or production of or as a component part of, such other article.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

(a) Tax based on price. Tax liability incurred on the use of an article shall be computed on the price at which such or similar articles are sold in the ordinary course of trade by manufacturers, producers, or importers thereof and in the absence of special arrangements. For additional provisions applicable in computing the tax in the case of the use of an article by a manufacturer and producer who purchased the article free of tax under section 4221(a)(1) of the Code for use by him in further manufacture, see section 4223(b) of the Code and the regulations thereunder (§53.143).

(b) Articles regularly sold by manufacturer. If the manufacturer, producer, or importer of an article regularly sells such articles at wholesale in arm's length transactions, tax liability on his use of any such article shall be computed on his lowest established wholesale price for such articles in effect at the time of the taxable use. In establishing such price, there shall be included and excluded, as applicable, the charges and readjustments specified in sections 4216(a) and 6416(b)(1) of the Code, as in effect at the time tax liability on the use of the article is incurred, and the regulations thereunder contained in this subpart and subpart L (§§53.91–53.94 and 53.173–53.176). If the manufacturer, producer, or importer of an article does not regularly sell such articles at wholesale in arm's length transactions, a constructive price on which the use tax shall be computed will be determined by the appropriate TTB officer. This price will be established after considering the selling practices and price structures of manfacturers, producers, and importers of similar articles.

(c) Articles governed by section 4218(a) used in manufacture of nontaxable combination articles. If the manufacturer, producer, or importer of an article to which section 4218(a) of the Code applies does not regularly sell such article separately but uses it as material in the manufacture or production of, or as a component part of, a nontaxable combination article consisting of a taxable and nontaxable article, liability for tax on his use shall be computed on the constructive price of the taxable article at the time of use. To determine the constructive price of the taxable article in such case, the combination article is considered to be composed of:

(1) Parts used exclusively in the functioning of the taxable article in the combination;

(2) Parts used exclusively in the functioning of the nontaxable article in the combination, and

(3) Parts, called common parts, which serve a dual function in connection with the parts in both paragraphs (c) (1) and (2) of this section.

The ratio which the cost of the parts in paragraph (c)(1) of this section bears to the sum of the cost of such parts and the parts in paragraph (c)(2) of this section is applied to the lowest established wholesale price for which like combination articles are at the time of the taxable use being sold by the manufacturer or producer in the ordinary course of trade. The resulting amount is the constructive sale price for the taxable article on which tax is to be computed. The cost of the common parts is allocable to the parts in paragraphs (c) (1) and (2) of this section in the same ratio, and, therefore, need not be taken into account in the computation since the inclusion and allocation of the cost of such parts in the determination would not result in a different ratio. In determining the lowest establishment wholesale price for the combination article, there shall be included and excluded, as applicable, the charges and readjustments specified in sections 4216(a) and 6416(b)(1) of the Code, as in effect at the time tax liability on the use of the taxable article is incurred, and the regulations thereunder contained in this subpart and subpart L of this part (§§53.91–53.94 and §§53.173–53.176). The tax applicable to the use of the article for which a constructive sale price has been computed is not affected by any charges or readjustments of the price for which the nontaxable combination article is sold, whether by reason of the return or repossession of the nontaxable article or its covering or container, or by a bona fide discount, rebate, allowance, or other factor.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

(a) General rule. If the title to, or ownership of, an article taxable under chapter 32 of the Code is transferred from the manufacturer, producer, or importer thereof, and, under the law, no tax attaches to such transfer, the subsequent sale, lease, or use of such article by the transferee is subject to tax to the same extent and manner as if such transferee were the manufacturer, producer, or importer of the article. The following examples illustrate this rule:

(1) The surviving spouse, child or children, executors or administrators, or other legal representatives, as the case may be, of a deceased manufacturer, producer, or importer of taxable articles, incur liability for tax on all such articles sold by them.

(2) A receiver or trustee in bankruptcy who under a court order conducts or liquidates the business of a manufacturer, producer, or importer of taxable articles, incurs liability for tax on all taxable articles sold by him, regardless of whether the articles were manufactured, produced, or imported before or after he took charge of the business.

(3) An assignee for the benefit of creditors of a manufacturer, producer, or importer incurs liability for tax with respect to all taxable articles sold by him as such assignee.

(4) If one or more member of a partnership withdraw, or if new partners are admitted, the new partnership so constituted incurs liability for tax on all taxable articles sold by it regardless of when such articles were manufactured, produced, or imported.

(5) A person who acquires title to taxable articles as a result of default of the manufacturer, producer, or importer pursuant to an agreement under the terms of which the articles were pledged as collateral incurs liability for tax with respect to his sale of the articles so acquired.

(6) A person who succeeds to the business of a manufacturer, producer, or importer of taxable articles, such as:

(i) A corporation which results from a consolidation, merger, or reorganization;

(ii) A corporation which acquires the business of an individual or partnership; or

(iii) A stockholder in a corporation who, after its dissolution, continues the business;

incurs liability for the tax on all taxable articles sold by such person. However, where a manufacturer, producer, or importer sells only his assets, rather than ownership of his business, he incurs liability for tax on the sale of any taxable articles included in such assets.

(b) Transfer of title to damaged articles. If title to a damaged taxable article is transferred by the manufacturer, producer, or importer thereof to a carrier or insurance company in adjustment of a damage claim, such transfer is not considered a taxable sale of the article. If the article is usable, even though damaged, the carrier or insurance company incurs liability for tax on its sale, lease, or use of the article. Where the article has been damaged to the extent that its only value is as scrap, and it is not restored to usable condition, sale thereof by the carrier or insurance company is not subject to tax.

(a) In general. Section 4221(a) of the Code sets forth the following exempt purposes for which an article subject to tax under chapter 32 of the Code may be sold tax-free by the manufacturer, producer, or importer:

(1) For use by the purchaser for further manufacture, or for resale by the purchaser to a second purchaser for use by such second purchaser in further manufacture,

(2) For export, or for resale by the purchaser to a second purchaser for export,

(3) For use by the purchaser as supplies for vessels or aircraft,

(4) To a State or local government for the exclusive use of a State or local government, and

(5) To a nonprofit educational organization for its exclusive use.

Section 4221(a) of the Code applies only in those cases where the exportation or use referred to is to occur before any other use, and where the seller, first purchaser, and second purchaser, as may be appropriate, have registered as required under section 4222 of the Code and paragraph (a) of §53.140. See paragraph (c) of this section for provisions relating to evidence required in support of tax-free sales. See §53.141 for exceptions to the requirement for registration.Where tax is paid on the sale of an article, but the article is used or resold for use for an exempt purpose, a claim for credit or refund may be filed in accordance with and to the extent provided in sections 6402(a) and 6416 of the Code, and the regulations thereunder (§§53.161 and 53.171–53.186).

(b) Manufacturer relieved of liability in certain cases—(1) General rule. Under the provisions of section 4221(c) of the Code, if an article subject to tax under Chapter 32 of the Code is sold free of tax by the manufacturer of the article for an exempt purpose referred to in section 4221(c) of the Code and paragraph (b)(2) of this section, the manufacturer shall be relieved of any tax liability under chapter 32 of the Code with respect to such sale if the manufacturer in good faith accepts a proper certification by the purchaser that the article or articles will be used by the purchaser in the stated exempt manner. See paragraph (b)(2) of this section for a list of the exempt purposes referred to in section 4221(c) of the Code.

(2) Situations wherein section 4221(c) of the Code is applicable. The following are situations wherein section 4221(c) of the Code is applicable with respect to sales made tax free on the assumption that one of the following sections of the Code provides exemption for such sales:

(i) Section 4221(a)(1) of the Code, to the extent that it relates to sales for further manufacture by a first purchaser (see §53.132),

(ii) Section 4221(a)(3) of the Code, relating to supplies for vessels and aircraft (see §53.134),

(iii) Section 4221(a)(4) of the Code, relating to sales to State or local governments (see §53.135),

(iv) Section 4221(a)(5) of the Code, relating to sales to nonprofit educational organizations (see §53.136).

(3) Situations wherein section 4221(c) of the Code is not applicable. The relief from liability for the payment of tax provided by section 4221(c) of the Code is not applicable with respect to sales made tax free on the assumption that one of the following sections of the Code provides exemption for such sales:

(i) Section 4221(a)(1) of the Code, to the extent that it relates to sales for resale to a second purchaser for use by the second purchaser in further manufacture (see §53.132),

(ii) Section 4221(a)(2) of the Code, relating to sales for export (see §53.133).

(4) Duty of seller to ascertain validity of tax-free sale. If the manufacturer at the time of its sale has reason to believe that the article sold by it is not intended for the exempt purpose indicated by the purchaser, or that the purchaser has failed to register as required, the manufacturer is not considered to have accepted certification from the purchaser in good faith, and is not relieved from liability under the provisions of section 4221(c) of the Code.

(5) Information to be furnished to purchaser. A manufacturer selling articles free of tax under this section shall indicate to the purchaser that:

(i) Certain articles normally subject to tax are being sold tax free, and

(ii) The purchaser is obtaining those articles tax free for an exempt purpose under an exemption certificate or its equivalent.

(6) The manufacturer may transmit this information by any convenient means, such as coding of sales invoices, provided that the information is presented with sufficient particularity so that the purchaser is informed that he has obtained the articles tax free and:

(i) The purchaser can compute and remit the tax due if an article sold tax free for further manufacture is diverted to a taxable use,

(ii) The manufacturer can remit the tax due with respect to an article purchased tax free for resale for use in further manufacture or for export if, within the 6-month period described in §53.132(c) or §53.133(c), the manufacturer does not receive proof that the article has been exported or resold for use in further manufacturer, or

(iii) The purchaser can notify the manufacturer if an article otherwise purchased tax free is diverted to a taxable use.

(c) Evidence required in support of tax-free sales—(1) Purchasers required to be registered. Every purchaser who is required to be registered (see §53.140) shall furnish to the seller, as evidence in support of each tax-free sale made by the seller to such purchaser, the exempt purpose for which the article or articles are being purchased and the registration number of the purchaser. Such information must be in writing and may be noted on the purchase order or other document furnished by the purchaser to the seller in connection with each sale.

(2) Purchasers not required to be registered. For the evidence which purchasers not required to register must furnish to the seller in support of each tax-free sale made by the seller to such purchasers, see paragraph (b) of §53.133 for sales or resales to a foreign purchaser for export, paragraph (d) of §53.134 for sales of supplies to vessels or aircraft, paragraph (c) of §53.135 for sales to State and local governments, and paragraph (c) of §53.141 for sales and purchases by the United States.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–380, 61 FR 37005, July 16, 1996]

(a) Further manufacture—(1) In general. Under prescribed conditions, an article subject to tax under Chapter 32 of the Code may be sold tax free by the manufacturer, pursuant to section 4221(a)(1) of the Code, for use by the purchaser in further manufacture, or for resale by the purchaser to a second purchaser for use by the second purchaser in further manufacture. See section 4221(d) (6) of the Code and paragraph (b) of this section for the circumstances under which an article is considered to have been sold for use in further manufacture. See section 6416(b)(3) of the Code and §53.180 for the circumstances under which credit or refund is available when tax-paid articles are used in further manufacture.

(2) Proof of resale for use in further manufacture. See section 4221(b)(1) of the Code and paragraph (c) of this section for provisions under which the exemption provided in section 4221(a)(1) of the Code shall cease to apply in the case of an article sold by the manufacturer to a purchaser for resale to a second purchaser for use in further manufacture unless the manufacturer receives timely proof of resale for further manufacture.

(b) Circumstances under which an article is considered to have been sold for use in further manufacture. (1) For purposes of the exemption from the manufacturers excise tax provided by section 4221(a)(1) of the Code, an article shall be treated as sold for use in further manufacture if the article is sold for use by the purchaser as material in the manufacture or production of, or as a component part of, another article taxable under chapter 32 of the Code;

(2) An article is used as material in the manufacture or production of, or as a component of, another article if it is incorporated in, or is a part or accessory of, the other article when the other article is sold by the manufacturer. In addition, an article is considered to be used as material in the manufacture of another article if it is consumed in whole or in part in testing such other article; for example, shells or cartridges that are used by the manufacturer of firearms to test new firearms. However, an article that is consumed in the manufacturing process other than in testing, so that it is not a physical part of the manufactured article, is not considered to have been used as material in the manufacture of, or as a component part of, another article.

(c) Proof of resale for further manufacture—(1) Cessation of exemption. The exemption provided in section 4221(a)(1) of the Code and described in paragraph (a) of this section in respect of an article sold by the manufacturer to a purchaser for resale to a second purchaser for use by the second purchaser in further manufacture shall cease to apply on the first day following the close of the 6-month period which begins on the date of the sale of such article by the manufacturer, or the date of shipment of the article by the manufacturer, whichever is earlier, unless, within such 6-month period, the manufacturer receives proof, in the form prescribed by paragraph (c)(2) of this section, that the article was actually resold by the purchaser to a second purchaser for such use. If, on the first day following the close of the 6-month period, such proof has not been received, the manufacturer shall become liable for tax at that time at the rate in effect when the sale was made but otherwise in the same manner as if the article had been sold by it on such first day at a taxable price equivalent to that at which the article was actually sold. If the manufacturer later obtains such proof, it may file a claim for refund or credit of this tax. The payment of this tax by the manufacturer is not considered an overpayment by the subsequent manufacturer or producer for which the subsequent manufacturer or producer is entitled to a credit or refund under section 6416(b)(3) of the Code. See section 4221(d)(6) of the Code and paragraph (b) of this section for the circumstances under which an article is considered to have been sold for use in further manufacture.

(2) Proof of resale—(i) Certificate of purchaser. The proof of resale to be received by the manufacturer, as required under section 4221(b)(1) of the Code, may consist of either a copy of the invoice of the manufacturer's vendee directed to his purchaser which discloses the certificate of registry number held by each party or a statement described in this paragraph. In the case of an invoice of manufacturer's vendee, it must appear from such invoice (or by statement attached thereto) that the article was in fact resold for use in further manufacture. In lieu of such an invoice, proof of resale may consist of a statement, executed and signed by the manufacturer's vendee which includes the following:

(A) Date statement was executed.

(B) Name and address of manufacturer's vendee (if other than the person executing statement).

(C) Certificate of registry number held by vendee.

(D) Specify article(s) purchased tax-free, by whom purchased, certificate of registry number of second purchaser, date of purchase(s), whether articles were purchased as material in the manufacture or production of, or as a component part or parts of, an article or articles taxable under Chapter 32 of the Code.

(E) Statement that person executing statement or manufacturer's vendee possesses proof of tax-free resale of the article(s) in the form of purchase orders and sales invoices and identifying the person who will maintain custody of such proof for 3 years from the date of the statement and will make such proof available for inspection by TTB during such 3 year period.

(F) Statement that a previous statement has not been executed in respect of such certificate of resale and that the person signing the statement is aware that fraudulent use of the statement may subject the person signing the statement and all parties making fraudulent use of the statement to all applicable criminal penalties under the Code.

(G) Name, signature, and title of individual executing statement.

(ii) Period covered. Any statement executed and signed by the manufacturer's vendee, as provided in paragraph (c)(2)(i) of this section, may be executed with respect to any one or more articles purchased tax free from a manufacturer and resold for use in further manufacture within the 6-month period prescribed in section 4221(a)(1) of the Code and paragraph (c)(1) of this section. Such statement (or other prescribed proof of resale) must be retained for inspection by the appropriate TTB officer as provided in section 6001 of the Code.

(iii) TTB I 5600.37. A preprinted statement, TTB I 5600.37, Statement of Manufacturer's Vendee, which is available as provided in §53.21(b), when completed, contains all necessary information for a properly executed statement. Extra copies of TTB I 5600.37 may be reproduced as needed.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–380, 61 FR 37005, July 16, 1996]

(a) In general. (1) An article subject to tax under chapter 32 of the Code may be sold tax free by the manufacturer, pursuant to section 4221(a)(2) of the Code and this section, for export, or for resale by the purchaser to a second purchaser for export. See §53.11 for the meaning of the term “exportation”. An article may be sold tax free by the manufacturer under the provisions of this section only if the person to whom the manufacturer sells the article intends either to export the article or to resell it to a person who intends to export it. An article may not be sold tax free under the provisions of this section by a manufacturer to a purchaser for resale to a second purchaser which does not intend to export the article itself but plans to resell it to a third purchaser for export. See section 6416(b)(2)(A) of the Code and §53.177 for the circumstances under which credit or refund of tax is available where tax-paid articles are exported from the United States.

(2) If an article, otherwise taxable under chapter 32 of the Code:

(i) Is sold tax free by the manufacturer pursuant to section 4221(a)(2) of the Code and this section, and

(ii) Is returned subsequently to the United States in an unused and undamaged condition,

then the importer is liable for the tax imposed by chapter 32 of the Code on the subsequent sale or use of the article in the United States. The provisions of this paragraph (a)(2) of this section may be illustrated by the following examples:

Example (1).  Q, a U.S. manufacturer of shells and cartridges, previously sold shells and cartridges to R, a company in Canada. The sale was tax free under section 4221(a)(2). Prior to use, R sold the shells and cartridges to S, who imports the articles into the United States and sells them. The sale of the shells and cartridges subjects S to an excise tax liability under section 4181.

Example (2).  X, a U.S. firearms manufacturer, sold a rifle to Y company in France. The sale was tax free under section 4221(a)(2). The rifle was sold by Y to W, an individual in the City of Nice, France. After initial use, W resold the rifle to X. X returned the rifle to the United States where it was resold. The resale of the rifle by X does not subject X to an excise tax liability under section 4181.

(b) Sales or resales to a foreign purchaser for export. In the case of sales or resales to a foreign purchaser for export, if the first or the second purchaser is located in a foreign country or possession of the United States, such purchaser is not required to register as provided in section 4222(a) of the Code and §53.140. To establish the right to sell articles tax free for export to a purchaser who is not registered and who is located in a foreign country or a possession of the United States, the manufacturer must obtain from such purchaser at the time title to the article passes or at the time of shipment, whichever is earlier, either:

(1) A written order or contract of sale showing that the manufacturer is to ship the article to a foreign destination; or

(2) Where delivery by the manufacturer is to be made within the United States, a statement from the purchaser showing:

(i) That the article is purchased either to fill existing or future orders for delivery to a foreign destination or for resale to another person engaged in the business of exporting who will export the article, and

(ii) That such article will be transported to its foreign destination in due course prior to use or further manufacture and prior to any resale except for export. See section 4221(b) of the Code and paragraphs (c) and (d) of this section for requirements as to timely proof of exportation and cessation of the exemption for export unless the evidence to show actual exportation has been received by the manufacturer.

(c) Cessation of exemption. The exemption provided in section 4221(a)(2) of the Code and paragraph (a) of this section for an article sold by the manufacturer for export or for resale by the purchaser to a second purchaser for export shall cease to apply on the first day following the close of the 6-month period which begins on the date of the sale of the article by the manufacturer, or the date of shipment of the article by the manufacturer, whichever is earlier, unless within the 6-month period the manufacturer receives proof, in the form prescribed by paragraph (d) of this section, that the article was actually exported. If, on the first day following the close of the 6-month period, the proof has not been received, the manufacturer shall become liable for tax at that time at the rate in effect when the sale was made but otherwise in the same manner as if the article had been sold by it on such first day at a taxable price equivalent to that at which the article was actually sold.

(d) Proof of exportation. (1) Exportation may be evidenced by:

(i) A copy of the export bill of lading issued by the delivering carrier,

(ii) A certificate by the agent or representative of the export carrier showing actual exportation of the article,

(iii) A certificate of landing signed by a customs officer of the foreign country to which the article is exported,

(iv) Where the foreign country has no customs administration, a statement of the foreign consignee showing receipt of the article, or

(v) Where a department or agency of the United States Government is unable to furnish any one of the foregoing four types of proof of exportation, a statement or certification on the department or agency stationery, executed by an authorized officer, that the listed or identified articles have, in fact, been exported.

(2) In any case where the manufacturer is not the exporter, the manufacturer must have in its possession a statement from the vendee to whom the manufacturer sold the article stating the following:

(i) Date statement was executed.

(ii) Name and address of manufacturer's vendee (if other than the person executing statement).

(iii) Certificate of registry number held by vendee.

(iv) Specify article(s) purchased tax-free, by whom purchased, and date of purchase.

(v) Statement that article(s) was either exported in due course by the vendee or was sold to another person who in due course exported the article(s).

(vi) Name and address of vendee who will maintain possession of the proof of exportation documents, description of the documents, and statement that vendee will maintain documents for 3 years and make them available to TTB for inspection.

(vii) Statement that a previous statement has not been executed in respect of the articles covered by this statement and that fraudulent use of this statement may subject person executing statement and all parties making fraudulent use of statement to all applicable criminal penalties under the Code.

(viii) Name, signature, title, and address of individual executing certificate.

(3) The statement executed and signed by the manufacturer's vendee, as provided in paragraph (d)(2) of this section, may be executed with respect to any one or more articles purchased tax free from a manufacturer and exported within the 6-month period prescribed in section 4221(b)(2) of the Code and paragraph (c) of this section. Such statement shall be kept for inspection by the appropriate TTB officer as provided in section 6001 of the Code.

(4) TTB I 5600.36. A preprinted statement, TTB I 5600.36, Statement of Manufacturer's Vendee, which is available as provided in §53.21(b), when completed, contains all necessary information for a properly executed statement. Extra copies of TTB I 5600.36 may be reproduced as needed.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–344, 58 FR 40354, July 28, 1993; T.D. 372, 61 FR 20724, May 8, 1996; T.D. ATF–380, 61 FR 37006, July 16, 1996]

(a) Supplies for vessels or aircraft—(1) In general. An article subject to tax under chapter 32 of the Code may be sold tax free by the manufacturer, pursuant to section 4221(a)(3) of the Code and this section, for use by the purchaser as supplies for vessels or aircraft. See paragraph (b) of this section for the meaning of the term “supplies for vessels or aircraft.” An article may be sold tax free under the provisions of this section only in those cases where the sale of an article by the manufacturer is made directly to the owner, officer, charterer, or authorized agent of a vessel or aircraft for use as supplies for the vessel or aircraft. No sale may be made tax free to a dealer for resale for use as supplies for vessels or aircraft, even though it is known at the time of sale by the manufacturer that the article will be so resold. See section 6416(b)(2)(B) of the Code and paragraph (c) of §53.178 for circumstances under which credit or refund of tax is available where tax-paid articles are used, or sold for use, as supplies for vessels or aircraft. An article may not be sold tax free under the provisions of this section by the manufacturer to passengers or members of the crew of a vessel or aircraft.

(2) Civil aircraft of foreign registry. In the case of any article sold by the manufacturer for use by the purchaser as supplies for civil aircraft of foreign registry employed in foreign trade or in trade between the United States and any of its possessions, the provisions of this paragraph apply only if the reciprocity requirements of section 4221(e)(1) of the Code are met. See paragraph (c) of this section.

(b) Meaning of terms—(1) Supplies for vessels or aircraft. The term “supplies for vessels or aircraft” means fuel supplies, ships' stores, sea stores, or legitimate equipment on vessels of war of the United States or of any foreign nation, vessels employed in the fisheries or in the whaling business, or vessels actually engaged in foreign trade or trade between the Atlantic and Pacific ports of the United States or between the United States and any of its possessions.

(2) Fuel supplies, ships' stores, and legitimate equipment. The terms “fuel supplies”, “ships' stores”, and “legitimate equipment” include all articles, materials, supplies, and equipment necessary for the navigation, propulsion, and upkeep of vessels of war of the United States or of any foreign nation, vessels employed in the fisheries or in the whaling business, or vessels actually engaged in foreign trade or in trade between the Atlantic and Pacific ports of the United States or between the United States and any of its possessions, even though such vessels may make intermediate stops in the United States. The term does not include supplies for vessels engaged in trade:

(i) Between domestic ports in the Atlantic Ocean and the Gulf of Mexico,

(ii) Between domestic ports on the Pacific Ocean,

(iii) Between domestic ports on the Great Lakes, or

(iv) On the inland waterways of the United States.

(3) Sea stores. The term sea stores includes any article purchased for use or consumption by the passengers or crew, or both, of a vessel during its voyage.

(4) Vessel. The term vessel includes:

(i) Every description of watercraft or other contrivance used, or capable of being used, as a means of transportation on water,

(ii) Civil aircraft registered in the United States and employed in foreign trade or in trade between the United States and any of its possessions, and

(iii) Civil aircraft registered in a foreign country and employed in foreign trade or trade between the U.S. and its possessions.

(5) Vessels of war of the United States or of any foreign nation. The term vessels of war of the United States or of any foreign nation includes:

(i) Every description of watercraft or other contrivance used, or capable of being used, as a means of transportation on water and constituting equipment of the armed forces (including the U.S. Coast Guard and U.S. National Guard) of the United States or of a foreign nation, and

(ii) Aircraft owned by the United States or by any foreign nation and constituting equipment of the armed forces thereof.

(iii) For purposes of this section, vessels or aircraft owned by armed forces are not considered to be equipment of such armed forces while on lease or loan to an organization that is not part of the armed forces.

(6) Vessels used in fisheries or whaling business. The exemption provided by section 4221(a)(3) of the Code and paragraph (a) of this section in the case of articles sold for the prescribed use on vessels employed in the fisheries or whaling business is limited to articles sold by the manufacturer for such use on vessels while employed, and to the extent employed, exclusively in the fisheries or in the whaling business. For purposes of this section, vessels engaged in sport fishing are not considered to be employed in the fisheries business.

(7) Civil aircraft. The exemption provided by section 4221(a)(3) of the Code and paragraph (a) of this section relating to supplies for vessels or aircraft, with respect to civil aircraft, extends only to civil aircraft when employed in foreign trade, or in trade between the United States and any of its possessions. Sales of supplies to civil aircraft when engaged in trade between the Atlantic and the Pacific ports of the United States are not exempt from the tax imposed under chapter 32 of the Code. See section 4221(e)(1) of the Code and paragraph (c) of this section for requirement of reciprocal exemption in the case of a civil aircraft registered in a foreign country.

(8) Trade. The term “trade” includes the transportation of persons or property for hire and the making of the necessary preparations for such transportation. The term “trade” also includes the transportation of property on a vessel or aircraft owned or chartered by the owner of the property in connection with the purchase, sale, or exchange of the property in a commercial business operation. However, a vessel owned or chartered by a company and used in the transportation of personnel or property of such company to or from its business properties located in a foreign country, or in a possession of the United States, is not engaged in “trade”.

(c) Reciprocity required in the case of civil aircraft. The exemption provided by section 4221(a)(3) of the Code and paragraph (a) of this section with respect to the sales of supplies for civil aircraft registered in a foreign country is further limited in that the privilege of exemption may be granted only if the Secretary of Commerce advises the Secretary of the Treasury that the foreign country allows, or will allow, substantially the same reciprocal privileges. If a foreign country discontinues the allowance of such substantially reciprocal exemption, the exemption allowed by the United States will not apply after the Secretary of the Treasury is notified by the Secretary of Commerce of the discontinuance of the exemption allowed by the foreign country.

(d) Evidence required to establish—(1) In general. The exemption provided in section 4221(a)(3) of the Code and paragraph (a) of this section for articles sold for use by the purchaser as supplies for vessels or aircraft applies only:

(i) If both the manufacturer and purchaser are registered under the provisions of section 4222 of the Code, or

(ii) The purchaser or both the manufacturer and the purchaser are not registered but have satisfied the provisions of paragraph (d)(2) of this section.

See paragraph (c) of §53.131 for the evidence required to establish exemption where the purchaser is registered pursuant to section 4222 of the Code and §53.140.

(2) Exemption certificates for use in support of tax-free sales of supplies for vessels and aircraft. (i) In order to establish exemption from tax under section 4221(a)(3) of the Code in those instances where the purchaser or both the manufacturer and purchaser are not registered under section 4222 of the Code, the manufacturer must obtain (prior to or at the time of the sale) from the owner, charterer, or authorized agent of the vessel or aircraft and retain in the manufacturer's possession a properly executed exemption certificate in the form prescribed by paragraph (d)(2)(iii) of this section. If articles are sold tax-free for use as supplies for civil aircraft employed in foreign trade or in trade between the United States and any of its possessions, the exemption certificate must show the name of the country in which the aircraft is registered.

(ii) Where only occasional sales of articles are made to a purchaser for use as supplies for vessels or aircraft, a separate exemption certificate shall be furnished for each order. However, where sales are regularly or frequently made to a purchaser for such exempt use, a certificate covering all orders for a specified period not to exceed 12 calendar quarters will be acceptable. Such certificates and proper records of invoices, orders, etc., relative to tax-free sales must be kept for inspection by the appropriate TTB officer as provided in section 6001 of the Code.

(iii) Acceptable form of exemption certificate. A certificate of exemption to support tax-free sales under this section must include the following:

(A) Name of owner, charterer, or authorized agent.

(B) Name of company and vessel.

(C) List article(s) covered by the certificate or beginning and ending dates during which orders will be placed (not to exceed 12 calendar quarters).

(D) Statement that articles will be used only for fuel supplies, ships' stores, sea stores, or legitimate equipment on a vessel belonging to one of the class of vessels to which section 4221 of the Code applies. Identify class of vessel certificate covers (see paragraphs (a) and (b) of this section).

(E) If articles are purchased for use on civil aircraft engaged in foreign trade or trade between the United States and any of its possessions, state the country in which the aircraft is registered.

(F) Statement that it is understood that if any articles are used for any purpose other than as stated in the certificate, or are resold or otherwise disposed of, the person executing the certificate must notify the manufacturer.

(G) Statement that the certificate shall not be used to purchase tax-free articles for use as supplies, etc. on pleasure vessels or any type of aircraft except:

(1) Civil aircraft employed in foreign trade or trade between the United States and any of its possessions;

(2) Aircraft owned by the United States or any foreign country and constituting a part of the armed forces thereof.

(H) Statement that it is understood that any fraudulent use of the certificate may subject person executing certificate and all parties making fraudulent use of the certificate to all applicable criminal penalties under the Code.

(I) Statement that person executing certificate is prepared to establish by satisfactory evidence the purpose for which the article(s) was used.

(J) Date, name, signature, and address of person executing the certificate.

(iv) TTB I 5600.34. A preprinted certificate, TTB I 5600.34, Exemption Certificate, which is available as provided in §53.21(b), when completed, contains all necessary information for a properly executed certificate. Extra copies of TTB I 5600.34 may be reproduced as needed.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–380, 61 FR 37006, July 16, 1996; T.D. TTB–44, 71 FR 16957, Apr. 4, 2006]

(a) In general. An article subject to tax under Chapter 32 of the Code may be sold tax free by the manufacturer, pursuant to section 4221(a)(4) of the code and this section, to a State or local government for the exclusive use of such State or local government. See paragraph (b) of this section for the meaning of the term “State or local government”. An article may be sold tax free by the manufacturer under this paragraph only in those cases where the sale is made directly to a State or local government for its exclusive use. Accordingly, no sale may be made tax free to a dealer for resale to a State or local government for its exclusive use, even though it is known at the time of sale by the manufacturer that the article will be so resold. A sale of an article to a State or local government for resale is not considered to be a sale for the “exclusive use” of the State or local government, within the meaning of section 4221(a)(4) of the Code, and, therefore, such sales may not be made tax free. Such sales are not exempt regardless of whether the resales are made to government employees, or the fact that the article is an item of equipment the employee is required to possess in carrying out his duties. For example, pistols or revolvers may not be sold tax free to a State or local government for resale to its police officers. See section 6416(b)(2)(C) of the Code, and paragraph (d) of §53.178, for the circumstances under which credit or refund of tax is available where tax-paid articles are sold for the exclusive use of a State or local government.

(b) State or local government. The term State or local government includes any State, the District of Columbia, and any political subdivision of any of the foregoing. See, section 7871(a)(2)(B) of the Code and 26 CFR 305.7701–1 et seq., which provide that an Indian tribal government shall be treated as a State for purposes of exemption from an excise tax imposed by chapter 32. Section 7871(b) of the Code provides that the exemption from tax applies only if the transaction involves the exercise of an essential governmental function of the Indian tribal government.

(c) Evidence required in support of tax-free sales to State or local governments. (1) In the case of a State or local government which is registered (see §53.141 for provisions under which a State or local government may register if it so desires), the provisions of paragraph (c) of §53.131 have application as to the evidence required in support of tax-free sales. If a State or local government is not registered, the evidence required in support of a tax-free sale to the State or local government shall, except as provided in paragraph (c)(2) of this section, consist of a certificate, executed and signed by an officer or employee authorized by the State or local government to execute and sign the certificate. If it is impracticable to furnish a separate certificate for each order or contract because of frequency of purchases, a certificate covering all orders between given dates (such period not to exceed 12 calendar quarters) will be acceptable. The certificates and proper records of invoices, orders, etc., relative to tax-free sales must be retained by the manufacturer as provided in §53.24(d). A certificate of exemption to support tax-free sales under this section must contain the following:

(i) Title of official executing certificate, branch of government, date executed, and statement that official is authorized to execute certificate.

(ii) List articles covered by the certificate or beginning and ending dates during which orders will be placed by the purchaser (period not to exceed 12 calendar quarters).

(iii) Name of manufacturer from which articles purchased.

(iv) Governmental unit purchasing articles.

(v) Statement that is understood that articles purchased under this certificate of exemption are limited to use exclusively by the purchasing governmental entity.

(vi) Statement that is understood that any fraudulent use of this certificate may subject the person executing the certificate and all parties making fraudulent use of the certificate to all applicable criminal penalties under the Code.

(vii) Name, address, and signature of person executing the certificate.

(2) A purchase order, provided that all of the information required by paragraph (c)(1) of this section is included therein, is acceptable in lieu of a separate exemption certificate.

(3) TTB I 5600.35. A preprinted certificate, TTB I 5600.35, Exemption Certificate, which is available as provided in §53.21(b), when completed, contains all necessary information for a properly executed certificate. Extra copies of TTB I 5600.35 may be reproduced as needed.

(d) Resale of articles purchased tax free by a State or local government. If articles purchased tax free for the exclusive use of a State or local government (whether on the basis of a registration number or an exemption certificate) are, prior to use by the State or local government, resold under circumstances that do not amount to an exclusive use by the State or local government (such as pistols or revolvers that are resold by a police department to its police officers), the parties responsible in the State or local government are required to inform the manufacturer, producer, or importer from whom the articles were purchased that they were disposed of in a manner that did not amount to an exclusive use by the State or local government. A willful failure to supply the manufacturer, producer, or importer with the information required by this subparagraph will subject responsible parties to the penalties provided by section 7203 of the Code.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–380, 61 FR 37006, July 16, 1996]

(a) In general. An article subject to tax under chapter 32 of the Code may be sold tax free by the manufacturer, pursuant to section 4221(a)(5) of the Code and this section, to a nonprofit educational organization for its exclusive use. See paragraph (b) of this section for the meaning of the term “nonprofit educational organization”. An article may be sold tax free by the manufacturer under this paragraph only in those cases where the sale of an article by the manufacturer is made directly to a nonprofit educational organization for its exclusive use. Accordingly, no sale may be made tax free to a dealer for resale to a nonprofit educational organization for its exclusive use even though it is known at the time of sale by the manufacturer that the article will be so resold. See section 6416(b)(2)(D) of the Code, and paragraph (e) of §53.178, for the circumstances under which credit or refund of tax is available where tax-paid articles are sold for the exclusive use of a nonprofit educational organization.

(b) Nonprofit educational organization. The term “nonprofit educational organization” means an organization described in section 170(b)(1)(A)(ii) of the Code that is exempt from income tax under section 501(a) of the Code. Section 170(b)(1)(A)(ii) describes an “educational organization” as one that normally maintains a regular faculty and curriculum and normally has a regularly enrolled body of pupils or students in attendance at the place where its educational activities are regularly carried on. The term also includes a school operated as an activity of an organization described in section 501(c)(3) of the Code which is exempt from income tax under section 501(a) of the Code, provided the primary function of such school is the presentation of formal instruction and provided such school normally maintains a regular faculty and curriculum and normally has a regularly enrolled body of pupils or students in attendance at the place where its educational activities are regularly carried on.

(c) Evidence required in support of tax-free sales to nonprofit educational organizations. Every nonprofit educational organization purchasing tax free under section 4221(a)(5) of the Code must furnish the following information to the seller:

(1) The tax exempt purpose for which the article or articles are being purchased, and

(2) Its registration number. Such information must be in writing and may be noted on the purchase order or other document furnished by the purchaser to the seller in connection with each sale “except that a single notification containing the information described in this paragraph may cover all sales by the seller to the purchaser made during a designated period not to exceed 12 successive calendar quarters.”. See paragraph (c) of §53.131 for the evidence required to establish exemption.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–447, 66 FR 19088, Apr. 13, 2001]

(a) General rule. Except as provided in §53.141, tax-free sales under section 4221 of the Code may be made only if the manufacturer, first purchaser, and second purchaser, as the case may be, have registered as required by this section. To secure a Certificate of Registry, the applicant must furnish the information required in paragraph (b) of this section.

(b) Information to be submitted. Except as provided in §53.141, any person who is eligible to sell or purchase articles free of a tax imposed by section 4181 of the Code and who has not registered with the Commissioner of the Internal Revenue Service prior to January 1, 1991 or with TTB in accordance with the provisions of this section shall, prior to making a tax-free sale or purchase, file TTB Form 5300.28, in duplicate, executed in accordance with the instructions contained on the reverse of TTB Form 5300.28. The person who receives an approved Certificate of Registry shall be considered to be registered for purposes of selling or purchasing articles tax free as provided in this section. In the case of a nonprofit educational organization, information shall be furnished showing that the organization is an educational organization described in section 170(b)(1)(A)(ii) of the Code that is exempt from income tax under section 501(a) of the Code, or is a school operated as an activity of an organization described in section 501(c)(3) that is exempt from income tax under section 501(a).

(c) Evidence required in support of tax-free sales. See §53.131(c)(1) for evidence required in support of tax-free sales to purchasers who are required to be registered.

(d) Failure to register. If either the seller or purchaser is not registered as required by this section of the regulations, tax-free sales may not be made, except as indicated in §53.141.

(e) Cross references. (1) For exceptions to the requirement for registration, see section 4222(b) of the Code and §53.141.

(2) For revocation or suspension of registration, see §53.142.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by ATF–447, 66 FR 19088, Apr. 13, 2001]

(a) State and local governments. (1) A State or local government purchasing articles direct from the manufacturer for its exclusive use may, but is not required to, register as provided in §53.140. To establish the right to sell articles tax free to a State or local government that is not registered, the manufacturer must obtain from an authorized official of the State or local government and retain in the manufacturer's possession either a properly executed exemption certificate, or a purchase order that contains the same information required to be furnished in an exemption certificate. See §53.135(c) for the information necessary to substantiate a tax-free sale under such circumstances.

(2) Each State requesting registration will be assigned one Certificate of Registry. The registration number shown on this certificate may be used by all agencies, boards, and commissions of the State that are authorized by the State to make purchases for the exclusive use of the State. However, the registration number assigned to a State may not be used by any political subdivision of that State, such as a county or municipality. Each political subdivision of a State desiring to obtain a Certificate of Registry must obtain a separate registration number.

(b) Sales or resales to foreign purchasers for export. Persons whose principal place of business is not within the United States may, but are not required to, register in order to purchase articles tax free for export. To establish the right to sell articles tax free for export to a purchaser who is not registered and who is located in a foreign country or a possession of the United States, the manufacturer must obtain the evidence required by §53.133(b).

(c) United States. The registration requirements of the regulations in this part do not apply to purchases and sales by the United States or any of its agencies or instrumentalities. The evidence required in support of such tax-free purchases and sales is a notation on the purchase order or other document furnished to the seller clearly indicating that the article or articles are being purchased tax free as authorized by chapter 32 of the Code.

(d) Supplies for vessels and aircraft. An article subject to an excise tax imposed by chapter 32 of the Code may be sold tax free by the manufacturer under the provisions of §53.134 for use by the purchaser as supplies for a vessel or aircraft if both the manufacturer and the purchaser are registered under the provisions of §53.140. The article also may be sold tax free for such use even though neither the manufacturer nor the purchaser is so registered if the provisions of paragraph (d) of §53.134 are satisfied.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

(a) The appropriate TTB officer is authorized to deny, revoke or temporarily suspend, upon written notice, the registration of any person and the right of such person to sell or purchase articles tax free under section 4221 of the Code in any case in which he finds that:

(1) The registrant is not a bona fide manufacturer, or a purchaser reselling direct to manufacturers or exporters;

(2) The registrant is for some other reason not eligible under these regulations to retain a Certificate of Registry; or

(3) The registrant has used his registration to avoid payment of the tax imposed by section 4181 of the Code, or to postpone or interfere in any manner with the collection of such tax;

(4) Such denial, revocation, or suspension is necessary to protect the revenue; or

(5) The registrant failed to comply with the requirements of paragraph (c) of §53.140, relating to the evidence required to support a tax-free sale.

(b) The denial, revocation, or suspension of registration is in addition to any other penalty that may apply under the law for any act or failure to act.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–365, 60 FR 33671, June 28, 1995]

(a) Purchasing manufacturer to be treated as the manufacturer. For purposes of Chapter 32 of the Code, a manufacturer or producer to whom an article is sold or resold tax free under section 4221(a)(1) of the Code for use by it in further manufacture shall be treated as the manufacturer or producer of such article. If a manufacturer who purchases an article tax free for further manufacture does not use the article for further manufacture, the sale of the article by it, or its use of the article other than in further manufacture, shall, for purposes of the taxes imposed by chapter 32 of the Code, be treated as a sale or use of the article by the manufacturer thereof. See paragraphs (b) and (c) of this section for determination of taxable sale price where an article purchased tax free for further manufacture is resold, or used other than in further manufacture.

(b) Computation of tax. Except as provided in paragraph (c) of this section, the tax liability referred to in paragraph (a) of this section shall be based on the price for which the article was sold by the purchasing manufacturer, or, where the manufacturer uses the article for a purpose other than that for which it was purchased, the tax shall be based on the price at which such or similar articles are sold, in the ordinary course of trade, by manufacturers, producers, or importers thereof. See section 4218(e) of the Code and §53.115.

(c) Election. (1) Instead of computing the tax as described under paragraph (b) of this section, the purchasing manufacturer who has incurred liability for tax on its sale or use of an article as provided by paragraph (a) of this section may compute the tax incurred under chapter 32 of the Code by using as the tax base either the price for which the article was sold to it by the first purchaser, if any, or the price for which such article was sold by the actual manufacturer, producer, or importer of such article. The purchasing manufacturer must have in its possession information upon which to substantiate such basis for tax. For purposes of this paragraph, the price for which the article was sold by the actual manufacturer or by the first purchaser shall be determined as provided in section 4216 of the Code and §§53.91–53.102. However, such price shall not be adjusted for any discount, rebate, allowance, return, or repossession of a container or covering, or otherwise.

(2) The election under this paragraph shall be in the form of a statement attached to the return reporting the tax applicable to the sale or use of the article which gave rise to such tax liability. Such election, once made, may not be revoked.

(a) In general. (1) Liability for tax imposed under chapter 32 of the Code shall be reported on TTB Form 5300.26, Federal Firearms and Ammunition Excise Tax Return. Except as provided in paragraphs (a)(2) and (b) of this section, a return on Form 5300.26 shall be filed for a period of one calendar quarter.

(2) Return periods after September 30, 1992. For return periods after September 30, 1992, every person required to make a return on TTB Form 5300.26 who does not incur any firearms and ammunition excise tax liability in a given calandar quarter shall not be required to file a return on TTB Form 5300.26 for that calandar quarter. Except as provided in paragraph (a)(5) of this section, every person required to make a return on TTB Form 5300.26 who does not incur any firearms and ammunition excise tax liability for the entire calendar year and who has not filed a final return in accordance with §53.152 shall file an annual return on TTB Form 5300.26.

(3) Return periods prior to October 1, 1992. For return periods prior to October 1, 1992, every person required to make a return on TTB Form 5300.26 shall make a return for each calendar quarter (whether or not liability was incurred for any tax reportable on the return for the return period) until the person has filed a final return in accordance with §53.152.

(4) Forms, etc. Each return required under the regulations in this part, together with any prescribed copies, records, or supporting data, shall be completed in accordance with the applicable forms, instructions, and regulations.

(5) Special rule for one-time or occasional filings for return periods on or after July 1, 1995. One-time or occasional filers are not required to file quarterly or annual returns pursuant to paragraph (a)(2) of this section if the person reporting tax does not engage in any activity with respect to which tax is reportable on the return in the course of a trade or business. Such persons shall file and pay tax for periods only when liability is incurred. See §53.159(b)(2), providing that a deposit of taxes is not required for a one-time or occasional filing.

(b) Monthly and semimonthly returns—(1) Requirement. If the appropriate TTB officer determines that any taxpayer who is required to deposit taxes under the provision of §§53.157 or 53.159 has failed to make deposits of those taxes, the taxpayer shall be required, if so notified in writing by the appropriate TTB officer, to file a monthly or semimonthly return on TTB Form 5300.26. Every person so notified by the appropriate TTB officer shall file a return for the calendar month or semimonthly period in which the notice is received and for each calendar month or semimonthly period thereafter until the person has filed a final return in accordance with §53.152 or is required to file returns on the basis of a different return period pursuant to notification as provided in paragraph (b)(2) of this section.

(2) Change of requirement. The appropriate TTB officer may require the taxpayer, by notice in writing, to file a quarterly or monthly return, if the taxpayer has been filing returns for a semimonthly period, or may require the taxpayer to file a quarterly or semimonthly return, if the taxpayer has been filing monthly returns.

(3) Return for period change takes effect. (i) If a taxpayer who has been filing quarterly returns receives notice to file a monthly or semimonthly return, or a taxpayer who has been filing monthly returns receives notice to file a semimonthly return, the first return required pursuant to the notice shall be filed for the month or semimonthly period in which the notice is received and all months or semimonthly periods which are not includable in an earlier period for which the taxpayer is required to file a return.

(ii) If a taxpayer who has been filing monthly or semimonthly returns receives notice to file a quarterly return, the last month or semimonthly period for which a return shall be filed is the last month or semimonthly period of the calendar quarter in which the notice is received.

(iii) If a taxpayer who has been filing semimonthly returns receives notice to file a monthly return, the last semimonthly period for which a return shall be made is the last semimonthly period of the month in which the notice is received.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–330, 57 FR 40325, Sept. 3, 1992; T.D. ATF–365, 60 FR 33671, June 28, 1995]

(a) In general. Any person who is required to make a return on TTB Form 5300.26 pursuant to §53.151 and who in any return period ceases operations in respect of which the person is required to make a return on the form, shall make the return for that return period as a final return. A return made as a final return shall be marked “Final Return” by the person filing the return. A taxpayer who has only temporarily ceased to incur liability for tax required to be reported on TTB Form 5300.26 because of temporary or seasonal suspension of business or for other reasons, shall not make a final return until such operations are permanently ceased.

(b) Statement to accompany final return. Each final return shall have attached a statement showing the address at which the records required by the regulations in this part will be kept, the name of the person keeping the records, and, if the business of the taxpayer has been sold or otherwise transferred to another person, the name and address of that person and the date on which the sale or transfer took place. If no sale or transfer occurred or if the taxpayer does not know the name of the person to whom the business was sold or transferred, that fact should be included in the statement.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–330, 57 FR 40325, Sept. 3, 1992. Redesignated in part by T.D. ATF–365, 60 FR 33670, June 28, 1995]

(a) Quarterly returns. Each return required to be made under §53.151(a) for a return period of one calendar quarter shall be filed on or before the last day of the first calendar month following the close of the period for which it is made. However, a return may be filed on or before the 10th day of the second calendar month following the close of the period if timely deposits under section 6302(c) of the Code and §53.157 have been made in full payment of the taxes due for the period. For purposes of the preceding sentence, a deposit which is not required by regulations in respect of the return period may be made on or before the last day of the first calendar month following the close of the period.

(b) Monthly, semimonthly and annual returns—(1) Monthly returns. Each return required to be made under §53.151(b) for a monthly period shall be filed not later than the 15th day of the month following the close of the period for which it is made.

(2) Semimonthly returns. Each return required to be made under §53.151(b) for a semimonthly period shall be filed not later than the 10th day of the semimonthly period following the close of the period for which it is made.

(3) Annual returns. Each return filed under the provisions of §53.151(a) for a return period of one calendar year shall be filed not later than the 31st day following the close of the calendar year.

(c) Last day for filing. If the due date falls on a Saturday, Sunday, or legal holiday, the return and remittance shall be due on the next succeeding day which is not a Saturday, Sunday, or legal holiday. For purposes of this section, “legal holiday” is defined by section 7503 of the Code and 26 CFR 301.7503(b).

(d) Late filing. The taxpayer is subject to a penalty for failure to file a return or to pay tax within the prescribed time as imposed by section 6651 of the Code, if the return and remittance are not filed before the close of business on the prescribed last day of filing. For additions to the tax in the case of failure to file a return within the prescribed time, see 27 CFR 70.96.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–330, 57 FR 40325, Sept. 3, 1992]

(a) Each return on TTB Form 5300.26 shall be filed with TTB, in accordance with the instructions on the form.

(b) When the taxpayer sends the return on TTB Form 5300.26 by U.S. Mail, the official postmark of the U.S. Postal Service stamped on the cover in which the return was mailed shall be considered the date of delivery of the return. When the postmark on the cover is illegible, the burden of proving when the postmark was made will be on the taxpayer. When the taxpayer sends the return with or without remittance by registered mail or by certified mail, the date of registry or the date of the postmark on the sender's receipt of certified mail, as the case may be, shall be treated as the date of delivery of the return and, if accompanied, of the remittance.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–330, 57 FR 40325, Sept. 3, 1992]

(a) In general. Ordinarily, no extension of time will be granted for filing any return statement or other document required with respect to the taxes impose by chapter 32, because the information required for the filing of those documents is under normal circumstances readily available. However, if because of temporary conditions beyond the taxpayer's control, a taxpayer believes an extension of time for filing is justified, the taxpayer may apply to the appropriate TTB officer for an extension. An extension of time for filing a return does not operate to extend the time for payment of the tax or any part of the tax unless so specified in the extension. For extensions of time for payment of the tax, see §53.156.

(b) Application for extension of time. The application for an extension of time for filing the return shall be addressed to the appropriate TTB officer with whom the return is to be filed and must contain a full recital of the causes for the delay. It should be made on or before the due date of the return, and failure to do so many indicate negligence and constitute sufficient cause for denial. It should, where possible, be made sufficiently early to permit consideration of the matter and reply before what otherwise would be the due date of the return.

(c) Filing the return. If an extension of time for filing the return is granted, a return shall be filed before the expiration of the period of extension.

(a) In general. (1) Ordinarily, no extensions of time will be granted for payment of any tax imposed by Chapter 32 of the Code, and shown or required to be shown on any return. However, if because of temporary conditions beyond the taxpayer's control a taxpayer believes an extension of time for payment is justified, the taxpayer may apply for an extension filing TTB Form 5600.38. The period of an extension shall not be in excess of 6 months from the date fixed for payment of the tax, except that if the taxpayer is abroad the period of the extension may be in excess of 6 months.

(2) The granting of an extension of time for filing a return does not operate to extend the time for the payment of the tax or any part of the tax unless so specified in the extension. See §53.155.

(b) Undue hardship required for extension. An extension of the time for payment shall be granted only upon a satisfactory showing that payment on the due date of the amount with respect to which the extension is desired will result in an undue hardship. The extension will not be granted upon a general statement of hardship. The term “undue hardship” means more than an inconvenience to the taxpayer. It must appear that substantial financial loss, for example, loss due to the sale of property at a sacrifice price, will result to the taxpayer from making payment on the due date of the amount with respect to which the extension is desired. If a market exists, the sale of property at the current market price is not ordinarily considered as resulting in an undue hardship.

(c) Application for extension. An application for an extension of time for payment of the tax shown or required to be shown on any return shall be made on TTB Form 5600.38, Application for Extension of Time for Payment of Tax, and shall be accompanied by evidence showing the undue hardship that would result to the taxpayer if the extension were refused. The application shall also be accompanied by a statement of the assets and liabilities of the taxpayer and an itemized statement showing all receipts and disbursements for each of the 3 months immediately preceding the due date of the amount to which the application relates. The application, with supporting documents, must be filed on or before the date prescribed for payment of the amount with respect to which the extension is desired. The application will be examined, and within 30 days, if possible, will be denied, granted, or tentatively granted subject to certain conditions of which the taxpayer will be notified. If an additional extension is desired, the request for it must be made on or before the expiration of the period for which the prior extension is granted.

(d) Payment pursuant to extension. If an extension of time for payment is granted, the payment shall be made on or before the expiration of the period of the extension without the necessity of notice and demand. The granting of an extension of time for payment of the tax does not relieve the taxpayer from liability for the payment of interest on the tax during the period of the extension. See section 6601 of the Code and 26 CFR 301.6601–1.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991; T.D. ATF–447, 66 FR 19088, Apr. 13, 2001]

Note: For deposit requirement for deposits made for calendar quarters beginning on or after July 1, 1995, see §53.159.

(a) Monthly deposits. Except as provided in paragraph (b) of this section, if for any calendar month (other than the last month of a calendar quarter) any person required to file a quarterly excise tax return on TTB Form 5300.26 has a total liability under this part of more than $100 for all excise taxes reportable on that form, the amount of liability for taxes shall be deposited by the person in accordance with the instructions on TTB Form 5300.27 on or before the last day of the month following the calendar month.

(b) Semimonthly deposits. (1) If any person required to file an excise tax return on TTB Form 5300.26 for any calendar quarter has a total liability under this part of more than $2,000 for all excise taxes reportable on that form for any calendar month in the preceding calendar quarter, the amount of that liability for taxes under this part for any semimonthly period (as defined in paragraph (d)(1) of this section) in the succeeding calendar quarter shall be deposited by the person in accordance with the instructions on TTB Form 5300.27 on or before the depositary date (as defined in paragraph (d)(2) of this section) applicable to the semimonthly period.

(2) A person will be considered to have complied with the requirements of paragraph (b)(1) of this section for a semimonthly period if—

(i)(A) The person's deposit for the semimonthly period is not less than 90 percent of the total amount of the excise taxes reportable by the person on TTB Form 5300.26 for the period, and

(B) If the semimonthly period occurs in a calendar month other than the last month in a calendar quarter, the person deposits any underpayment for the month by the 9th day of the second month following the calendar month; or

(ii)(A) The person's deposit for each semimonthly period in the calendar month is not less than 45 percent of the total amount of the excise taxes reportable by the person on TTB Form 5300.26 for the month, and

(B) If such month is other than the last month in a calendar quarter, the person deposits any underpayment for such month by the 9th day of the second month following the calendar month; or

(iii)(A) The person's deposit for each semimonthly period in the calendar month is not less than 50 percent of the total amount of the excise taxes reportable by the person on TTB Form 5300.26 for the second preceding calendar month, and

(B) If such month is other than the last month in a calendar quarter, the person deposits any underpayment for such month by the 9th day of the second month following the calendar month; or

(iv)(A) The requirements of paragraph (b)(2) (i)(A), (ii)(A), or (iii)(A) of this section are satisfied for the first semimonthly period of a calendar month after December 1990,

(B) If the person's deposit for the second semimonthly period of the calendar month is, when added to the deposit for the first semimonthly period, not less than 90 percent of the total amount of the excise taxes reportable by the person on TTB Form 5300.26 for the calendar month, and

(C) If the semimonthly periods occur in a calendar month other than the last month in a calendar quarter, the person deposits any underpayment for the month by the 9th day of the second month following the calendar month.

(3)(i) Paragraph (b)(2) (ii) and (iii) of this section shall not apply to any person who normally incurs in the first semimonthly period in each calendar month more than 75 percent of the person's total excise tax liability under this part for the month.

(ii) Persons who make their deposits in accordance with paragraph (b)(2) (ii), (iii), or (iv) of this section will find it unnecessary to keep their books and records on a semimonthly basis.

(c) Deposit of certain excess undeposited amounts. Notwithstanding paragraphs (a) and (b) of this section, if any person required to file an excise tax return on TTB Form 5300.26 for any calendar quarter beginning after December 31, 1990, has a total liability under this part for all excise taxes reportable on the form for the calendar quarter which exceeds by more than $100 the total amount of taxes deposited by the person pursuant to paragraph (a) or (b) of this section for the calendar quarter, the person shall, on or before the last day of the calendar month following the calendar quarter for which the return is required to be filed, deposit in accordance with the instructions on TTB Form 5300.27 the full amount by which the person's liability for all excise taxes reportable on the return for that calendar quarter exceeds the amount of excise taxes previously deposited by the person for that calendar quarter.

(d) Definitions—(1) Semimonthly period. The term semimonthly period means the first 15 days of a calendar month or the portion of a calendar month following the 15th day of that month.

(2) Depositary date. The term depositary date means, in the case of deposits for semimonthly periods beginning after December 31, 1990, the 9th day of the semimonthly period following the semimonthly period for which the taxes are reportable.

(3) Lockbox financial institution. The term lockbox financial institution means the financial institution designated as a depository for the payment of excise taxes on TTB Form 5300.27, Federal Firearms and Ammunition Excise Tax Deposit form.

(e) Depositary forms and procedures—(1) In general. Each remittance of amounts required to be deposited for periods beginning after December 31, 1990 shall be accompanied by an TTB Form 5300.27, Federal Firearms and Ammunition Excise Tax Deposit form, or TTB Form 5300.26, Federal Firearms and Ammunition Excise Tax Return, which shall be prepared in accordance with the applicable instructions. Taxpayers electing to remit deposits by EFT pursuant to §53.158 shall prepare and submit TTB Form 5300.26 or TTB Form 5300.27 in accordance with the instructions on the form. The timeliness of the deposit will be determined by the date it is received (or is deemed received under section 7502(e) and 26 CFR 301.7502–1) by the lockbox financial institution, or the TTB officer designated on TTB Form 5300.27 or TTB Form 5300.26 accompanying the deposit, or when made by electronic fund transfer, the Treasury Account. Amounts deposited pursuant to this paragraph shall be considered to be paid on the last day prescribed for filing the return in respect of the tax (determined without regard to any extension of time for filing the returns), or at the time deposited, whichever is later.

(2) Number of remittances. A person required by this section to make deposits may make one or more remittances with respect to the amount required to be deposited. An amount of tax which is not otherwise required by this section to be deposited may, nevertheless, be deposited if the person liable for the tax so desires.

(3) Information required. Each person making deposits pursuant to this section shall report on the return for the period with respect to which the deposits are made information regarding the deposits in accordance with the instructions applicable to the return and pay (or deposits by the due date of the return) the balance, if any, of the taxes due for the period.

(4) Procurement of prescribed forms. Copies of the Federal Firearms and Ammunition Excise Tax Deposit form will be furnished, so far as possible, to persons required to make deposits under this section. Such a person will not be excused from making a deposit, however, by the fact that no form has been furnished. A person not supplied with the form is required to apply for it in ample time to make the required deposits within the time prescribed, supplying with the application the person's name, employer identification number, address, and the taxable period to which the deposits will relate. Copies of the Federal Firearms and Ammunition Excise Tax Deposit form are available as provided in §53.21(b).

(f) Nonapplication to certain taxes. This section does not apply to taxes for:

(1) Any month or semimonthly period in which the taxpayer receives notice pursuant to §53.151(b) to file TTB Form 5300.26 or

(2) Any subsequent month or semimonthly period for which a return on TTB Form 5300.26 is required.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991; T.D. ATF–330, 57 FR 40325, Sept. 3, 1992; T.D. ATF–365, 60 FR 33671, June 28, 1995; T.D. ATF–447, 66 FR 19088, Apr. 13, 2001; T.D. TTB–44, 71 FR 16958, Apr. 4, 2006]

(a) In general. For return periods after September 30, 1992, any taxpayer liable for firearms and ammunition excise taxes incurred under this part may elect to remit payments and deposits of the taxes (taxpayments) by electronic fund transfer (EFT). A taxpayer who elects to make remittance by EFT must use that method of remitting excise taxes on firearms and ammunition for a minimum of four consecutive calendar quarters. A taxpayer who makes remittance by EFT for a calendar quarter may not use any other method of remitting and ammunition excise taxes for that quarter.

(b) Requirements. (1) On or before the 10th day of the calendar quarter preceding the calendar quarter in which the taxpayer will begin remitting taxes by EFT, each taxpayer who elects to make remittances by EFT of firearms and ammunition excise taxes incurred under this part shall give written notice to the appropriate TTB officer, indicating that remittances will be paid by EFT. Taxpayers who gave written notification in a previous calendar quarter electing to make remittances of tax by EFT are not required to give additional written notifications to continue remitting tax by EFT for succeeding calendar quarters.

(2) For each deposit made or return filed in accordance with this subpart, the taxpayer shall direct the taxpayer's financial institution to make an EFT in the amount of the taxpayment to the Treasury Account as provided in paragraph (e) of this section. The request will be made to the financial institution early enough for the transfer of funds to be made to the Treasury Account no later than the close of business on the last day for making the deposit or filing the return as prescribed in §§53.157 or 53.159, and 53.153. The request will take into account any time limit established by the financial institution.

(3) Taxpayers who elect to discontinue making remittances by EFT of firearms and ammunition excise taxes may make such election at any time following four consecutive calendar quarters in which tax is remitted by EFT. Taxpayers electing to discontinue making remittances by EFT shall remit the tax with the next deposit or return as prescribed in §§53.157 or 53.159, and 53.151 for remittances not made by EFT and notify the appropriate TTB officer by attaching a written notification to the tax deposit form or return stating that remittance of firearms and ammunition excise taxes will no longer be made by EFT.

(c) Remittance. (1) Taxpayers who elect to make firearms and ammunition excise taxpayments by EFT shall file the deposit form and/or return with TTB in accordance with the applicable instructions on the forms.

(2) Remittances will be considered as made when the taxpayment by EFT is received by the Treasury Account when it is paid to a Federal Reserve Bank.

(3) When the taxpayer directs the financial institution to effect an electronic fund transfer message as required by paragraph (b)(2) of this section, the transfer data record furnished to the taxpayer through normal banking procedures will serve as the record of payment and will be retained as part of the required records.

(d) Failure to make a taxpayment by EFT. The taxpayer is subject to penalties imposed by 26 U.S.C. 6651 and 6656, as applicable, for failure to make a payment or deposit of tax by EFT on or before the close of business on the prescribed last day for making such payment or deposit.

(e) Procedure. Upon the notification required under paragraph (b)(1) of this section, the appropriate TTB officer will issue to the taxpayer an TTB Procedure entitled Payment of Tax by Electronic Fund Transfer. This publication outlines the procedure a taxpayer follows when preparing deposits, returns and EFT remittances in accordance with this subpart.

[T.D. ATF–330, 57 FR 40326, Sept. 3, 1992, as amended by T.D. ATF–365, 60 FR 33671, June 28, 1995; T.D. ATF–447, 66 FR 19088, Apr. 13, 2001]

(a) Definitions—(1) Definition of tax liability. For purposes of this section, the term “tax liability” means the total tax liability for the specified period plus or minus any allowable adjustments made in accordance with the instructions applicable to the form on which the return is made.

(2) Semimonthly period. Except as provided in paragraph (c)(4)(ii) of this section, the term “semimonthly period” means the first 15 days of a calendar month or the remaining portion of a calendar month following the 15th day of that month.

(b) In general—(1) Semimonthly deposits. Except as provided in paragraphs (b)(2), (c)(2), and (j) of this section, any person required to file a quarterly excise tax return on TTB Form 5300.26 must make a deposit of tax for each semimonthly period as prescribed in paragraph (c) of this section.

(2) One-time or occasional filings. No deposit is required in the case of any taxes reportable on a one-time or occasional filing (as defined in §53.151(a)(5)).

(c) Amount of deposit—(1) In general. Except as provided in paragraphs (c)(2), (c)(3) and (c)(6) of this section, the deposit of tax for each semimonthly period must be equal to the amount of tax liability incurred during that semimonthly period. Except as provided in paragraph (c)(3) of this section, no deposit is required for any semimonthly period in which no tax liability is incurred.

(2) De minimis exception. Except as provided in paragraph (c)(3) of this section, any person who has a tax liability for the current calendar quarter of $2,000 or less is not required to make deposits for that quarter. However, semimonthly deposits of tax are required beginning with the semimonthly period in which unpaid tax liability exceeds $2,000 and for every semimonthly period thereafter in which tax liability is incurred. The first deposit for the current quarter shall be equal to the unpaid tax liability; thereafter, deposits shall be equal to the amount of tax liability incurred during that semimonthly period.

(3) Amount of deposit; safe harbor rule based on look-back quarter liability; In general. Except as provided in paragraph (c)(6) of this section, any person who made a return of tax on TTB Form 5300.26 reporting taxes for the second preceding calendar quarter (the “look-back quarter”), or who did not file a return for the look-back quarter because of the provisions of §53.151(a)(2), is considered to have complied with the requirement for deposit of taxes for the current calendar quarter if—

(i) The deposit of taxes for each semimonthly period in the current calendar quarter is an amount equal to not less than 1/6 (16.67 percent) of the total tax liability incurred for the look-back quarter;

(ii) Each deposit is made on time; and

(iii) The amount of any underpayment of taxes for the current calendar quarter is paid by the due date of the return.

(4) Modification for third calendar quarter. The safe harbor rule in paragraph (c)(3) of this section does not apply for the third calendar quarter unless—

(i) The deposit of taxes for the semimonthly period July 1–September 15 meets the requirements of paragraph (c)(3) of this section; and

(ii) Each deposit of taxes for the periods September 16–25 and September 26–30 is not less than 1/12th (8.34 percent) of the total tax liability incurred for the look-back quarter.

(5) Modification for tax rate increase—(i) Application. The safe harbor rule as prescribed in paragraph (c)(3) is modified for the first and second calendar quarters beginning on or after the effective date of an increase in the rate of any tax prescribed by 26 U.S.C. 4181 to which this part 53 applies.

(ii) Modification. The amount of deposit for calendar quarters referred to in paragraph (c)(3) of this section must be adjusted so that the deposit of taxes for each semimonthly period in the calendar quarter is not less than 1/6 (16.67 percent) of the tax liability the person would have had with respect to the tax for the look-back quarter if the increased rate of tax had been in effect for that look-back quarter.

(6) First time filers. Any person who did not file a return of tax on TTB Form 5300.26 for the first and second preceding calendar quarters because they were not engaged in any activity with respect to which tax is reportable on the return in the course of a trade or business, is considered to have complied with the requirement for deposit of taxes for the current calendar quarter if—

(i) The deposit of taxes for each semimonthly period in the calendar quarter is not less than 95 percent of the tax liability incurred with respect to those taxes during the semimonthly period;

(ii) Each deposit is made on time; and

(iii) The amount of any underpayment of taxes for the current calendar quarter is paid by the due date of the return.

(d) Failure to comply with deposit requirements. (1) If a person fails to make deposits as required under this part, the appropriate TTB officer may withdraw the person's right to use the safe harbor rule provided by paragraph (c)(3) of this section.

(2) Cross reference. The appropriate TTB officer may also require a taxpayer who fails to make deposits of tax to file a monthly or semimonthly return, see §53.151(b)(1).

(e) Time for making deposit. Except for deposits for the period September 16–25, each deposit required to be made by this section shall be made not later than the 9th day of the semimonthly period following the close of the period for which it is made. The deposit for the period September 16–25 shall be made not later than September 28. The deposit for the period September 26–30, is due not later than October 9.

(f) Last day for filing. (1) Except as provided by paragraph (f)(2) of this section, if the due date of the deposit falls on a Saturday, Sunday, or legal holiday, the deposit and remittance shall be due on the next succeeding day which is not a Saturday, Sunday, or legal holiday. For purposes of this section, “legal holiday” is defined by section 7503 of the Code and 27 CFR 70.306(b) of this chapter.

(2) If the required due date of the deposit for the period September 16–25 falls on a Saturday, the deposit and remittance shall be due on the preceding day. If such required due date falls on a Sunday, the return and remittance shall be due on the following day.

(g) Forms and procedures. Each remittance of amounts required to be deposited shall be accompanied by Form 5300.27, Federal Firearms and Ammunition Excise Tax Deposit form, or Form 5300.26, Federal Firearms and Ammunition Excise Tax Return, which shall be prepared in accordance with the applicable instructions. Taxpayers electing to remit deposits by EFT pursuant to §53.158 shall prepare and submit Form 5300.26 or Form 5300.27 in accordance with the instructions contained in Procedure 92–1, Publication 5000.11. The timeliness of the deposit will be determined by the date it is received by the lockbox financial institution, or the TTB officer designated on the form accompanying the deposit, or the Treasury Account, when made by EFT. In order for deposits of less than $20,000 made by U.S. Mail to be considered received timely, the date of mailing must be on or before the second day preceding the due date of the deposit as evidenced by the official postmark of the U.S. Postal Service stamped on the cover in which the deposit was mailed. When the postmark on the cover is illegible, the burden of proving when the postmark was made will be on the taxpayer. When the taxpayer sends the deposit by registered mail or by certified mail, the date of registry or the date of the postmark on the sender's receipt of certified mail, as the case may be, shall be treated as the date of delivery of the deposit. Any deposit of $20,000 or more must be received by the last day prescribed for making such deposit, regardless of when mailed. Amounts deposited pursuant to this paragraph shall be considered to be paid on the last day prescribed for filing the return in respect of the tax (determined without regard to any extension of time for filing the returns), or at the time deposited, whichever is later.

(h) Number of remittances. A person required by this section to make deposits shall make one deposit for a semimonthly period.

(i) Procurement of prescribed forms. Copies of the Federal Firearms and Ammunition Excise Tax Deposit form will be furnished, so far as possible, to persons required to make deposits under this section. Such a person will not be excused from making a deposit however, by the fact that no form has been furnished. A person not supplied with the form is required to obtain the form in ample time to make the required deposits within the time prescribed. Copies of the Federal Firearms and Ammunition Excise Tax Deposit form are available as provided in §53.21(b).

(j) Taxpayers required to file monthly or semimonthly returns. This section does not apply to taxes for:

(1) Any month or semimonthly period in which the taxpayer receives notice pursuant to section 53.151(b) to file TTB Form 5300.26; or

(2) Any subsequent month or semimonthly period for which a return on TTB Form 5300.26 is required.

(3) Taxpayers required to file monthly returns shall make semimonthly deposits of 100 percent of the liability incurred during each semimonthly period by the 9th day of the month following the last day of the semimonthly period. Taxpayers required to file semimonthly returns shall pay any tax due for the semimonthly period with each return.

(k) Examples.

Example 1.  One-time filing or occasional filing—(1) Facts. On October 18, 1995, A, an individual who lives in the United States purchases a custom made rifle outside the United States and imports it into the United States. A uses the rifle on October 20, 1995. A is liable for the firearms excise tax imposed by sections 4181 and 4218(a). Since A does not regularly sell rifles in arm's length transactions, a constructive sale price of $20,000 is determined (§53.115(b)). The amount of A's tax liability is $2200, 11 percent of the constructive sale price of the rifle. The liability is incurred during the fourth calendar quarter of 1995, the quarter during which the rifle is used (§53.111(d)). A did not import the rifle in the course of its trade or business and does not engage in any activities with respect to which tax is reportable on TTB Form 5300.26 in the course of a trade or business.

(2) Filing requirement. A must file a return on Form 5300.26 (§53.151(a)) for the fourth calendar quarter of 1995 reporting A's $2200 firearms excise tax liability. The Form 5300.26 is due by January 31, 1996, the last day of the first month following the calendar quarter (§53.153(a)). Because A did not import the firearm in the course of its trade or business and does not engage in any activities with respect to which tax is reportable in the course of a trade or business, the return is a one-time filing or occasional filing.

Example 2.  Deposit requirement; based on look-back quarter liability—(1) Facts. B is a manufacturer of firearms. B sells 75 pistols which have a taxable sale price of $500 each during the second calendar quarter of 1996. B sold 50 of the pistols in the first semimonthly period of May, 1996, and the other 25 pistols in the second semimonthly period of April, 1996. B did not incur tax liability in any other semimonthly period in the second quarter. The amount of B's tax liability for the second calendar quarter is $3,750, 10 percent of the taxable sale price of the pistols. B filed Form 5300.26 for the second preceding calendar quarter, the look-back quarter, on January 31, 1996 reporting tax liability in the amount of $2,700.

(2) Deposit requirement. B is required to make deposits of tax for each semimonthly period in the calendar quarter because B has incurred more than $2,000 in liability for the current quarter. B may use the safe harbor rule based on look-back quarter liability to determine the amount of the required deposits (§53.159(c)(3)). Under this safe harbor rule, B's deposit for each semimonthly period must equal at least $450.00, 1/6 (16.67 percent) of the tax liability incurred for the look-back quarter. B's deposit must be timely and B must pay the amount of any underpayment by the due date of the return. Accordingly, B meets the deposit requirement if B makes the following deposits:

(3) Filing requirement. B must file a return on Form 5300.26 for the second calendar quarter of 1996 reporting B's $3750 tax liability (§53.151(a)). The form 5300.26 is due by July 31, 1996, the last day of the first month following the calendar quarter (§53.153(a)). B must also pay $1050.00, the underpayment amount by which the total tax liability for the second calendar quarter exceeds the total tax liability for the look-back quarter, by the due date of the return.

Example 3.  Deposit amount; no liability in look-back quarter—(1) Facts. C, a manufacturer of ammunition, filed returns for the first, second and third quarters of 1995 reporting C's tax liability. During the fourth quarter of 1995, C did not make any taxable sales of shells or cartridges, thereby incurring no tax liability for that return period. C did not file Form 5300.26 for the fourth calendar quarter since no tax liability was incurred (§53.151(a)(2)). C made taxable sales in the second quarter of 1996 amounting to $25,500.00, incurring a tax liability of $2805.

(2) Deposit requirement. Ordinarily, C would be required to make deposits of tax for each semimonthly period in the calendar quarter because C's total liability for the current calendar quarter exceeds $2,000. However, since C incurred a tax liability of $0 in the second preceding calendar quarter (the look-back quarter) (§53.159(c)(3)), under the safe harbor rule, C is not required to make deposits of tax.

Example 4.  Deposit requirement; First time Filer—(1) Facts. D, a manufacturer of firearms, began business on 2/16/96. D sold 300 shotguns which had a taxable sales price of $210 each during the first quarter of 1996. D sold 70 shotguns in the second semimonthly period of February, 1996, 130 shotguns in the first semimonthly period of March, 1996 and 100 shotguns in the second semimonthly period of March, 1996. The amount of D's tax liability for the first quarter of 1996 is $6,930, 11 percent of the taxable sale price of the shotguns.

(2) Deposit requirement. D is required to make a deposit of tax when D's tax liability exceeds $2,000 (§53.159(c)(2)). Therefore, D must make a deposit of tax beginning with the first semimonthly period in March, the semimonthly period in which D's unpaid tax liability exceeded $2,000. Because D, a first time filer, does not have an established look-back quarter, D's deposit of tax must be at least 95 percent of the incurred tax liability. D is required to make deposits of at least 95 percent of incurred tax liability for every semimonthly period in the quarter thereafter. D's deposits must be timely and any underpayment of tax must be paid by the due date of the return. Accordingly, D meets the deposit requirement if D makes the following deposits:

(3) Filing requirement. D must file a return on Form 5300.26 for the first calendar quarter of 1996 reporting D's $6,930 tax liability (§53.151(a)). The form 5300.26 is due by April 30, 1996, the last day of the first month following the calendar quarter (§53.153(a)). D must also pay $346.50, the amount by which the tax liability for the quarter was underpaid, by the due date of the return.

Example 5.  Deposit amount; third calendar quarter—(1) Facts. E, a manufacturer of firearms, is a semimonthly depositor who makes deposits of tax using the safe harbor rule based on the look-back quarter to determine the amount of tax required to be deposited for the third calendar quarter of 1995. E incurred a tax liability amounting to $38,000 for the third quarter. E filed Form 5300.26 for the second preceding calendar quarter, the look-back quarter on May 1, 1995, reporting tax liability in the amount of $30,000.

(2) Deposit requirement. Because E has incurred more than $2,000 in liability and has chosen to make deposits of tax based on the look-back quarter, E is required to make deposits of tax equal to $5,000, 1/6 (16.67 percent) of the tax liability incurred in the look-back quarter, for each semimonthly period in the calendar quarter. However, because of the special rule which modifies the safe harbor rule for deposits of tax for the month of September (§53.159(c)(4)), E must make deposits equal to $2500.00 each, 1/12th (8.34 percent) of the tax liability incurred in the look-back quarter for the periods September 16–25 and September 26–30. E's deposits must be timely and E must pay the amount of any underpayment by the due date of the return. Accordingly, E meets the deposit requirement if E makes the following deposits:

(3) Filing requirement. E must file a return on Form 5300.26 for the third calendar quarter of 1995 reporting E's $38,000 tax liability (§53.153(a)). E must also pay $8,000, the underpayment amount by which the total tax liability for the third calendar quarter exceeds the total tax liability for the look-back quarter, by the due date of the return.

[T.D. ATF–365, 60 FR 33671, June 28, 1995, as amended by T.D. ATF–447, 66 FR 19089, Apr. 13, 2001; T.D. TTB–44, 71 FR 16958, Apr. 4, 2006]

For provisions relating to credits and refunds of certain taxes on sales and services see section 6416 of the Code and §§53.171–53.186. For regulations under section 6402 of the Code of general application in respect of credits or refunds, see 27 CFR 70.122, 70.123, and 70.124 (Procedure and Administration).

For regulations under section 6404 of the Code of general application in respect of abatements of assessments to tax, see 27 CFR 70.125 (Procedure and Administration).

Any claims for credit or refund of an overpayment of a tax imposed by chapter 32 of the Code shall be made in accordance with the applicable provisions of this subpart and the applicable provisions of 27 CFR 70.123 (Procedure and Administration). A claim on TTB Form 2635 (5620.8) is not required in the case of a claim for credit, but the amount of the credit shall be claimed by entering that amount as a credit on a return of tax under this subpart filed by the person making the claim. In this regard, see §53.185.

(a) Overpayment not described in section 6416(b)(2) of the Code—(1) Claims included. This paragraph applies only to claims for credit or refund of an overpayment of manufacturers tax imposed by Chapter 32. It does not apply, however, to a claim for credit or refund on any overpayment described in paragraph (b) of this section which arises by reason of the application of section 6416(b)(2) of the Code.

(2) Supporting evidence required. No credit or refund of any overpayment to which this paragraph (a) applies shall be allowed unless the person who paid the tax submits with the claim a written consent of the ultimate purchaser to the allowance of the credit or refund, or submits with the claim a statement, supported by sufficient available evidence, asserting that:

(i) The person has neither included the tax in the price of the article with respect to which it was imposed nor collected the amount of the tax from a vendee, and identifying the nature of the evidence available to establish these facts, or

(ii) The person has repaid the amount of the tax to the ultimate purchaser of the article.

(3) Ultimate purchaser—(i) General rule. The term “ultimate purchaser”, as used in paragraph (a)(2) of this section, means the person who purchased the article for consumption, or for use in the manufacture of other articles and not for resale in the form in which purchased.

(ii) Special rule under section 6416(a)(3)—(A) Conditions to be met. If tax under chapter 32 of the Code is paid in respect of an article and the appropriate TTB officer determines that the article is not subject to tax under chapter 32, the term “ultimate purchaser”, as used in paragraph (a)(2) of this section, includes any wholesaler, jobber, distributor, or retailer who, on the 15th day after the date of the determination holds for sale any such article with respect to which tax has been paid, if the claim for credit or refund of the overpayment in respect of the articles held for sale by wholesaler, jobber, distributor, or retailer is filed on or before the date on which the person who paid the tax is required to file a return for the period ending with the first calendar quarter which begins more than 60 days after the date of the determination by the appropriate TTB officer.

(B) Supporting statement. A claim for credit or refund of an overpayment of tax in respect of an article as to which a wholesaler, jobber, distributor, or retailer is the ultimate purchaser, as provided in this paragraph (a)(3)(ii), must be supported by a statement that the person filing the claim has a statement, by each wholesaler, jobber, distributor, or retailer whose articles are covered by the claim, showing total inventory, by model number and quantity, of all such articles purchased tax-paid and held for sale as of 12:01 a.m. of the 15th day after the date of the determination by the appropriate TTB officer that the article is not subject to tax under chapter 32 of the Code.

(C) Inventory requirement. The inventory shall not include any such article, title to which, or possession of which, has previously been transferred to any person for purposes of consumption unless the entire purchase price was repaid to the person or credited to the person's account and the sale was rescinded or any such article purchased by the wholesaler, jobber, distributor, or retailer as a component part of, or on or in connection with, another article. An article in transit at the first moment of the 15th day after the date of the determination is regarded as being held by the person to whom it was shipped, except that if title to the article does not pass until delivered to the person the article is deemed to be held by the shipper.

(b) Overpayments described in section 6416(b)(2) of the Code—(1) Claims included. This paragraph applies only to claims for credit or refund of amounts paid as tax under chapter 32 of the Code that are determined to be overpayments by reason of section 6416(b)(2) of the Code (relating to tax payments in respect of certain uses, sales, or resales of a taxable article).

(2) Supporting evidence required. No credit or refund of an overpayment to which this paragraph (b) applies shall be allowed unless the person who paid the tax submits with the claim a statement, supported by sufficient available evidence, asserting that:

(i) The person neither included the tax in the price of the article with respect to which it was imposed nor collected the amount of the tax from a vendee, and identifying the nature of the evidence available to establish these facts, or

(ii) The person repaid, or agreed to repay, the amount of the tax to the ultimate vendor of the article, or

(iii) The person has secured, and will submit upon request of the appropriate TTB officer, the written consent of the ultimate vendor to the allowance of the credit or refund.

(3) Ultimate vendor—General rule. The term ultimate vendor, as used in paragraph (b)(2) of this section, means the seller making the sale which gives rise to the overpayment or which last precedes the exportation or use which has given rise to the overpayment.

(c) Overpayments not included. This section does not apply to any overpayment determined under section 6416(b)(1) of the Code (relating to price readjustments), section 6416(b)(3)(A) of the Code (relating to certain cases in which refund or credit is allowable to the manufacturer who uses, in the further manufacture of a second article, a taxable article purchased by the manufacturer taxpaid), or section 6416(b)(5) of the Code (relating to the return to the seller of certain installment accounts which the seller had previously sold). In this regard, see §§53.173, 53.180, and 53.183.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

In the case of any payment of tax under chapter 32 of the Code that is determined to be an overpayment by reason of a price readjustment within the meaning of section 6416(b)(1) of the Code and §53.174 or §53.175, the person who paid the tax may file a claim for refund of the overpayment or may claim credit for the overpayment on any return of tax under this subpart which the person subsequently files. Price readjustments may not be anticipated. However, if the readjustment has actually been made before the return is filed for the period in which the sale was made, the tax to be reported in respect of the sale may, at the election of the taxpayer, be based either:

(a) On the price as so readjusted, or

(b) On the original sale price and a credit or refund claimed in respect of the price readjustment.

A price readjustment will be deemed to have been made at the time when the amount of the readjustment has been refunded to the vendor or the vendor has been informed that the vendor's account has been credited with the amount. No interest shall be paid on any credit or refund allowed under this section. For provisions relating to the evidence required in support of a claim for credit or refund, see 27 CFR 70.123 (Procedure and Administration), §53.172(a)(2) and §53.176. For provisions authorizing the taking of a credit in lieu of filing a claim for refund, see section 6416(d) of the Code and §53.185.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

(a) In general—(1) Rules of usual application—(i) Amount treated as overpayment. If the tax imposed by chapter 32 of the Code has been paid and thereafter the price of the article on which the tax was based is readjusted, that part of the tax which is proportionate to the part of the price which is repaid or credited to the purchaser is considered to be an overpayment. A readjustment of price to the purchaser may occur by reason of:

(A) The return of the article,

(B) The repossession of the article,

(C) The return or repossession of the covering or container of the article, or

(D) A bona fide discount, rebate, or allowance against the price at which the article was sold.

(ii) Requirements of price readjustment. A price readjustment will not be deemed to have been made unless the person who paid the tax either:

(A) Repays part or all of the purchase price in cash to the vendee,

(B) Credits the vendee's account for part or all of the purchase price, or

(C) Directly or indirectly reimburses a third party for part or all of the purchase price for the direct benefit of the vendee.

In addition, to be deemed a price readjustment, the payment or credit must be contractually or economically related to the taxable sale that the payment or credit purports to adjust. Thus, commissions or bonuses paid to a manufacturer's own agents or salesperson for selling the manufacturer's taxable products are not price readjustments for purposes of this section, since those commissions or bonuses are not paid or credited either to the manufacturer's vendee or to a third party for the vendee's benefit. On the other hand, a bonus paid by the manufacturer to a dealer's salesperson for negotiating the sale of a taxable article previously sold to the dealer by the manufacturer is considered to be a readjustment of the price on the original sale of the taxable article, regardless of whether the payment to the salesperson is made directly by the manufacturer or to the salesperson through the dealer. In such a case, the payment is related to the sale of a taxable article and is made for the benefit of the dealer because it is made to the dealer's salesperson to encourage the sale of a product owned by the dealer. Similarly, payments or credits made by a manufacturer to a vendee as reimbursement of interest expense incurred by the vendee in connection with a so-called “free flooring” arrangement for the purchase of taxable articles is a price readjustment, regardless of whether the payment or credit is made directly to the vendee or to the vendee's creditor on behalf of the vendee.

(iii) Limitation on credit or refund. The credit or refund allowable by reason of a price readjustment in respect of the sale of a taxable article may not exceed an amount which bears the same ratio to the total tax originally due and payable on the article as the amount of the tax-included readjustment bears to the original tax-included sale price of the article.

(2) Rules of special application—(i) Constructive sale price. If, in the case of a taxable sale, the tax imposed by chapter 32 of the Code is based on a constructive sale price determined under any paragraph of section 4216(b) of the Code and §§53.94–53.97, as determined without reference to section 4218 of the Code, then any price readjustment made with respect to the sale may be taken into account under this section only to the extent that the price readjustment reduces the actual sale price of the article below the constructive sale price.

Examples:  (A) A manufacturer sells a taxable article at retail for $110 tax included. Under section 4216(b)(1) of the Code the constructive sale price (tax included) of the article is determined to be $93. Thereafter, the manufacturer grants an allowance of $10 to the purchaser, which reduces the actual selling price (tax included) to $100. Since the readjustment price exceeds the amount of the constructive sale price, this readjustment is not recognized as a price readjustment under this section.

(B) Subsequently, the manufacturer extends to the purchaser an additional price allowance of $10, thereby reducing the actual sale price to $90. Since the actual sale price is now $3 less than the constructive sale price of $93, the manufacturer has overpaid by the amount of tax attributable to the $3. Assuming the tax rate involved is 10 percent, and the prices involved are tax-included, the overpayment of tax would be $0.27, determined as follows:

$$

(ii) Price determined under section 4223(b)(2) of the Code. If a manufacturer (within the meaning of section 4223(a) of the Code) to whom an article is sold or resold free of tax in accordance with the provisions of section 4221(a)(1) of the Code for use in further manufacture diverts the article to a taxable use or sells it in a taxable sale, and pursuant to the provisions of section 4223(b)(2) of the Code computes the tax liability in respect of the use or sale on the price for which the article was sold to the manufacturer or on the price at which the article was sold by the actual manufacturer, a reduction of the price on which the tax was based does not result in an overpayment within the meaning of section 6416(b)(1) of the Code of this section. Moreover, if a manufacturer purchases an article tax free and computes the tax in respect of a subsequent sale of the article pursuant to the provisions of section 4223(b)(2) of the Code, an overpayment does not arise by reason of readjustment of the price for which the article was sold by the manufacturer except where the readjustment results from the return or repossession of the article by the manufacturer, and all of the purchase price is refunded by the manufacturer. See, however, paragraph (b)(4) of this section as to repurchased articles.

(b) Return of an article—(1) Price readjustment. If a taxable article is returned to the manufacturer who paid the tax imposed by Chapter 32 of the Code on the sale of the article, a price readjustment giving rise to an overpayment results:

(i) If the article is returned before use, and all of the purchase price is repaid to the vendee or credited to the vendee's account, or

(ii) If the article is returned under an express or implied warranty as to quality or service, and all or a part of the purchase price is repaid to the vendee or credited to the vendee's account, or

(iii) If title is still in the seller, as, for example, in the case of certain installment sales contracts, and all or a part of the purchase price is repaid to the vendee or credited to the vendee's account.

(2) Return of purchase price. For purposes of paragraph (b)(1) of this section, if all of the purchase price of an article has been returned to the vendee, except for an amount retained by the manufacturer pursuant to contract as reimbursement of expense incurred in connection with the sale (such as a handling or restocking charge), all of the purchase price is considered to have been returned to the vendee.

(3) Taxability of subsequent sale or use. If, under any of the conditions described in paragraph (b)(1) of this section, an article is returned to the manufacturer who paid the tax and all of the purchase price is returned to the vendee, the sale is considered to have been rescinded. Any subsequent sale or use of the article by the manufacturer will be considered to be an original sale or use of the article by the manufacturer which is subject to tax under Chapter 32 of the Code unless otherwise exempt. If under any such condition an article is returned to the manufacturer who paid the tax and only part of the purchase price is returned to the vendee, a subsequent sale of the article by the manufacturer will be subject to tax to the extent that the sale price exceeds the adjusted sale price of the first taxable sale.

(4) Treatment of other transactions as repurchases. Except as provided in paragraph (b)(1) of this section, a price readjustment will not result when a taxable article is returned to the manufacturer who paid the tax on the sale of the article, even though all or a part of the purchase price is repaid to the vendee or credited to the vendee's account, since such a transaction will be considered to be a repurchase of the article by the manufacturer.

(c) Repossession of an article. If a taxable article is repossessed by the manufacturer who paid the tax imposed by chapter 32 of the Code on the sale of the article, and all or a part of the purchase price is repaid to the vendee or credited to the vendee's account, a price readjustment giving rise to an overpayment will result. However, if the manufacturer later resells the repossessed article for a price in excess of the original adjusted sale price, the manufacturer will be liable for tax under chapter 32 of the Code to the extent that the resale price exceeds the original adjusted sale price.

(d) Return or repossession of covering or container. If the covering or container of a taxable article is returned to, or repossessed by the manufacturer who paid the tax imposed by chapter 32 of the Code on the sale of the article, and all or a portion of the purchase price is repaid to the vendee or credited to the vendee's account by reason of the return or repossession of the covering or container, a price adjustment giving rise to an overpayment will result. If a taxable article is considered to have been repurchased, as provided in paragraph (b)(4) of this section, and the covering or container accompanies the taxable article as part of the transaction, the covering or container will also be considered to have been repurchased.

(e) Bona fide discounts, rebates, or allowances—(1) In general. Except as provided in §53.175 (relating to readjustments in respect of local advertising), the basic consideration in determining, for purposes of this section, whether a bona fide discount, rebate, or allowance has been made is whether the price actually by, or charged against, the purchaser has in fact been reduced by subsequent transactions between the parties. Generally, the price will be considered to have been readjusted by reason of a bona fide discount, rebate, or allowance, only if the manufacturer who made the taxable sale repays a part of the purchase price in cash to the vendee, or credits the vendee's account, or directly or indirectly reimburses a third party for part or all of the purchase price for the direct benefit of the vendee, in consideration of factors which, if taken into account at the time of the original transaction, would have resulted at that time in a lower sale price. For example, a price readjustment will be considered to have been made when a bona fide discount, rebate, or allowance is given in consideration of such factors as prompt payment, quantity buying over a specified period, the vendee's inventory of an article when new models are introduced, or a general price reduction affecting articles held in stock by the vendee as of a certain date. On the other hand, repayments made to the vendee do not effectuate price readjustments if given in consideration of circumstances under which the vendee has incurred, or is required to incur, an expense which, if treated as a separate item in the original transaction, would have been incudable in the price of the article for purposes of computing the tax.

Examples. The provisions of paragraph (e)(1) of this section may be illustrated by the following examples:

Example (1).  B, a manufacturer of shotguns, bills its distributors in a specified amount per shotgun purchased by them. Thereafter, B issues to each distributor a credit memorandum in the amount of X dollars for each demonstration by the distributor of the shotguns at a sporting goods exhibition. The credit which B allows the distributor for demonstration of B's product does not effect a readjustment of price.

Example (2).  C, a manufacturer of firearms, bills its dealers in a specified amount per firearm purchased by them. Thereafter, C remits to the dealer X dollars of the original sale price for each firearm sold by the dealer. An additional amount of Y dollars is paid to the dealer upon a showing by the dealer that the dealer has paid Y dollars to the salesperson who made the sale. In this case, the X dollars paid to the dealer by C constitutes a bona fide discount, rebate, or allowance since payment of such amount is in the nature of a price reduction. In addition, the Y dollars paid to the dealer in reimbursement for the amount paid by the dealer to the salesperson who made the sale, also constitutes a bona fide discount, rebate, or allowance.

(2) Inability to collect price. A charge-off of an amount outstanding in an open account, due to inability to collect, is not a bona fide discount, rebate, or allowance and does not, in and of itself, give rise to a price readjustment within the meaning of this section.

(3) Loss or damage in transit. If title to an article has passed to the vendee, the subsequent loss, damage, or destruction of the article while in the possession of a carrier for delivery to the vendee does not, in and of itself, affect the price at which the article was sold. However, if the article was sold under a contract providing that, if the article was lost, damaged, or destroyed in transit, title would revert to the vendor and the vendor would reimburse the vendee in full for the sale price, then the original sale is considered to have been rescinded. The vendor is entitled to credit or refund of the tax paid upon reimbursement of the full tax-included sale price to the vendee.

(a) In general. If a manufacturer has paid the tax imposed by chapter 32 of the Code on the price of any article sold by the manufacturer and thereafter has repaid a portion of the price to the purchaser or any subsequent vendee in reimbursement of expenses for local advertising of the article or any other article sold by the manufacturer which is taxable at the same rate under the same section of chapter 32 of the Code, the reimbursement will be considered a price readjustment constituting an overpayment which the manufacturer may claim as a credit or refund. The amount of the reimbursement may not, however, exceed the limitation provided by section 4216(e)(2) of the Code and §53.101, determined as of the close of the calendar quarter in which the reimbursement is made or as of the close of any subsequent calendar quarter of the same calendar year in which it is made. The term “local advertising,” as used in this section, has the same meaning as prescribed by section 4216(e)(4) of the Code and includes generally, advertising which is broadcast over a radio station or television station, or appears in a newspaper or magazine, or is displayed by means of an outdoor advertising sign or poster.

(b) Local advertising charges excluded from taxable price in one year but repaid in following year—(1) Determination of price readjustments for year in which charge is repaid. If the tax imposed by chapter 32 of the Code was paid with respect to local advertising charges that were excluded in computing the taxable price of an article sold in any calendar year but are not repaid to the manufacturer's purchaser or any subsequent vendee before May 1 of the following calendar year, the subsequent repayment of those charges by the manufacturer in reimbursement of expenses for local advertising will be considered a price readjustment constituting an overpayment which the manufacturer may claim as a credit or refund. The amount of the reimbursement may not, however, exceed the limitation provided by section 4216(e)(2) of the Code and §53.101, determined as of the close of the calendar quarter in which the reimbursement is made or as of the close of any subsequent calendar quarter of the same calendar year in which it is made.

(2) Redetermination of price readjustments for year in which charge was made. If the tax imposed by chapter 32 of the Code was paid with respect to local advertising charges that were excluded in computing the taxable price of an article sold in any calendar year but are not repaid to the manufacturer's purchaser or any subsequent vendor before May 1 of the following calendar year, the manufacturer may make a redetermination, in respect of the calendar year in which the charge was made, of the price readjustments constituting an overpayment which the manufacturer may claim as a credit or refund. This redetermination may be made by excluding the local advertising charges made in the calendar year that became taxable as of May 1 of the following calendar year.

No credit or refund of an overpayment arising by reason of a price readjustment described in §53.174 or §53.175 shall be allowed unless the manufacturer who paid the tax submits a statement, supported by sufficient available evidence:

(a) Describing the circumstances which gave rise to the price readjustment,

(b) Identifying the article in respect of which the price readjustment was allowed,

(c) Showing the price at which the article was sold, the amount of tax paid in respect of the article, and the date on which the tax was paid,

(d) Giving the name and address of the purchaser to whom the article was sold, and

(e) Showing the amount repaid to the purchaser or credited to the purchaser's account.

In the case of any payment of tax under chapter 32 of the Code that is determined to be an overpayment by reason of certain exportations, uses, sales, or resales described in section 6416(b)(2) of the Code and §53.178, the person who paid the tax may file a claim for refund of the overpayment or, in the case of overpayments under chapter 32 of the Code, may claim credit for the overpayment on any return of tax under this subpart which the person subsequently files. However, under the circumstances described in section 6416(c) of the Code and §53.184, the overpayments under chapter 32 may be refunded to an exporter or shipper. No interest shall be paid on any credit or refund allowed under this section. For provisions relating to the evidence required in support of a claim for credit or refund under this section, see 27 CFR 70.123 (Procedure and Administration) and 53.179. For provisions authorizing the taking of a credit in lieu of filing a claim for refund, see section 6416(d) of the Code and §53.185.

(a) In general. The payment of tax imposed by chapter 32 of the Code on the sale of any article, will be considered to be an overpayment by reason of any exportation, use, sale, or resale described in any one of paragraphs (b) to (e), inclusive, of this section. This section applies only in those cases where the exportation, use, sale, or resale (or any combination thereof) referred to in any one or more of these paragraphs occurs before any other use. If any article is sold or resold for a use described in any one of these paragraphs and is not in fact so used, the paragraph is treated in all respects as inapplicable.

(b) Exportation of tax-paid articles. A payment of tax under chapter 32 of the Code on the sale of any article will be considered to be an overpayment under section 6416(b)(2)(A) of the Code if the article is by any person exported to a foreign country or shipped to a possession of the United States. It is immaterial for purposes of this paragraph, whether the person who made the taxable sale had knowledge at the time of the sale that the article was being purchased for export to a foreign country or shipment to a possession of the United States. See §53.184 for the circumstances under which a claim for refund by reason of the exportation of an article may be claimed by the exporter or shipper, rather than by the person who paid the tax. For definition of the term “possession of the United States”, see §53.11.

(c) Supplies for vessels or aircraft. A payment of tax under chapter 32 of the Code on the sale of any article, will be considered to be an overpayment under section 6416(b)(2)(B) of the Code if the article is used by any person, or is sold by any person for use by the purchaser, as supplies for vessels or aircraft. The term “supplies for vessels or aircraft”, as used in this paragraph, has the same meaning as when used in sections 4221(a)(3), 4221(d)(3), and 4221(e)(1) of the Code, and the regulations thereunder (§53.134(b)(1)).

(d) Use by State or local government. A payment of tax under chapter 32 of the Code on the sale of any article will be considered to be an overpayment under section 6416(b)(2)(C) of the Code if the article is sold by any person to a State, any political subdivision thereof, or the District of Columbia for the exclusive use of a State, any political subdivision thereof, or the District of Columbia. For provisions relating to tax-free sales to a State, any political subdivision thereof, or the District of Columbia, see section 4221(a)(4) of the Code and §53.131.

(e) Use by nonprofit educational organization. A payment of tax under chapter 32 of the Code on the sale of any article will be considered to be an overpayment under section 6416(b)(2)(D) of the Code if the article is sold by any person to a nonprofit educational organization for its exclusive use. The term “nonprofit educational organization”, as used in this paragraph (e), has the same meaning as when used in section 4221 (a)(5) or (d)(5) of the Code, whichever applies, and the regulations under §53.136.

(a) Evidence to be submitted by claimant. No claim for credit or refund of an overpayment, within the meaning of section 6416(b)(2) of the Code and §53.178, of tax under chapter 32 of the Code shall be allowed unless the person who paid the tax submits with the claim the evidence required by §53.172(b)(2) and a statement, supported by sufficient available evidence:

(1) Showing the amount claimed in respect of each category of exportations, uses, sales, or resales on which the claim is based and which give rise to a right of credit or refund under section 6416(b)(2) of the Code and §53.177,

(2) Identifying the article, both as to nature and quantity, in respect of which credit or refund is claimed,

(3) Showing the amount of tax paid in respect of the article or articles and the dates of payment, and

(4) Indicating that the person claiming a credit or refund possesses evidence (as set forth in paragraph (b)(1) of this section) that the article has been exported, or has been used, sold, or resold in a manner or for a purpose which gives rise to an overpayment within the meaning of section 6416(b)(2) of the Code and §53.178.

(b) Evidence required to be in possession of claimant—(1) Evidence required under paragraph (a)(4)—(i) In general. The evidence required to be retained by the person who paid the tax, as provided in paragraph (a)(4) of this section, must, in the case of an article exported, consist of proof of exportation in the form prescribed in §53.133 or must, in the case of other articles sold tax-paid by that person, consist of a certificate, executed and signed by the ultimate purchaser of the article, in the form prescribed in paragraph (b)(1)(ii) of this section. However, if the article to which the claim relates has passed through a chain of sales from the person who paid the tax to the ultimate purchaser, the evidence required to be retained by the person who paid the tax may consist of a certificate, executed and signed by the ultimate vendor of the article, in the form provided in paragraph (b)(1)(iii) of this section, rather than the proof of exportation itself or the certificate of the ultimate purchaser.

(ii) Certificate of ultimate purchaser. (A) The certificate executed and signed by the ultimate purchaser of the article to which the claim relates must identify the article, both as to nature and quantity; show the address of the ultimate purchaser of the article, and the name and address of the ultimate vendor of the article; and describe the use actually made of the article in sufficient detail to establish that credit or refund is due, except that the use to be made of the article must be described in lieu of actual use if the claim is made by reason of the sale or resale of an article for a specified use which gives rise to the overpayment.

(B) If the certificate sets forth the use to be made of any article, rather than its actual use, it must show that the ultimate purchaser has agreed to notify the claimant if the article is not in fact used as specified in the certificate.

(C) The certificate must also contain a statement that the ultimate purchaser understands that the ultimate purchaser and any other party may, for fraudulent use of the certificate, be subject to all applicable criminal penalties under the Internal Revenue Code.

(D) A purchase order will be acceptable in lieu of a separate certificate of the ultimate purchaser if it contains all the information required by this paragraph.

(iii) Certificate of ultimate vendor. Any certificate executed and signed by an ultimate vendor as evidence to be retained by the person who paid the tax as provided in paragraph (a)(4) of this section may be executed with respect to any one or more overpayments by the person which arose under section 6416(b)(2) and §53.178 by reason of exportations, uses, sales or resales, occurring within any period of not more than 12 consecutive calendar quarters, the beginning and ending dates of which are specified in the certificate. A certificate supporting a claim for credit or refund under this section shall contain the following:

(A) Name of ultimate vendor if other than person executing the certificate.

(B) Statement that article(s) was purchased by the ultimate vendor tax-paid and was thereafter exported, used, sold, or resold.

(C) Description of proof which supports exportation or certificate as to use executed by ultimate purchaser.

(D) Statement that ultimate vendor retains such proof for 3 years from the date of the statement and will, upon request, supply such proof at any time within such 3 year period to the taxpayer to establish that credit or refund is due in respect of the article.

(E) Statement that to the best knowledge and belief of the person executing the certificate, no statement in respect of the proof of exportation or certificate has previously been executed and that the person executing the certificate understands that any fraudulent use of the certificate may subject the person executing the certificate or any other party to all applicable criminal penalties under the Code.

(F) Name, title, address and signature of person executing certificate and date signed.

(G) Description of all articles covered by the certificate, with the corresponding vendor's invoice number, date of resale of article, quantity, whether articles were exported or used and the use made of article or to be made of article.

(iv) TTB I 5600.33. TTB I 5600.33, Statement of Ultimate Vendor, which is available as provided in §53.21(b), when completed, contains all necessary information for a properly executed certificate. Additional copies may be reproduced as needed.

(2) Repayment or consent of ultimate vendor. If the person claiming credit or refund or an overpayment to which this section applies has repaid, or agreed to repay, the amount of the overpayment to the ultimate vendor or if the ultimate vendor consents to the allowance of the credit or refund, a statement to that effect, signed by the ultimate vendor, must be shown on, or made a part of, the supporting evidence required under this section to be retained by the person claiming the credit or refund. In this regard, see §53.172(b)(2).

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–380, 61 FR 37007, July 16, 1996; T.D. TTB–44, 71 FR 16958, Apr. 4, 2006]

In the case of any payment of tax under chapter 32 of the Code that is determined to be an overpayment under section 6416(b)(3) of the Code and §53.181 by reason of the sale of an article, directly or indirectly, by the manufacturer of the article to a subsequent manufacturer who uses the article in further manufacture of a second article or who sells the article with, or as a part of, the second article manufactured or produced by the subsequent manufacturer, the subsequent manufacturer may file claim for refund of the overpayment or may claim credit for the overpayment on any return of tax under this subpart subsequently filed. No interest shall be paid on any credit or refund allowed under this section. For provisions relating to the evidence required in support of a claim for credit or refund, see 27 CFR §70.123 (Procedure and Administration), 53.172 and 53.182. For provisions authorizing the taking of a credit in lieu of filing a claim for refund, see section 6416(d) of the Code and §53.185.

(a) In general. The payment of tax imposed by chapter 32 of the Code on the sale of any article by a manufacturer of the article will be considered to be an overpayment by reason of any use in further manufacture, or sale as part of a second manufactured article, described in paragraph (b) of this section. This section applies in those cases where the exportation, use, or sale (or any combination of those activities) referred to in this paragraph occurs before any other use.

(b) Use of tax-paid articles in further manufacture described in section 6416(b)(3)(A) of the Code. A payment of tax under chapter 32 of the Code on the sale of any article, directly or indirectly, by the manufacturer of the article to a subsequent manufacturer will be considered to be an overpayment under section 6416(b)(3)(A) of the Code if the article is used by the subsequent manufacturer as material in the manufacture or production of, or as a component part of, a second article manufactured or produced by the subsequent manufacturer which is taxable under chapter 32 of the Code. For this purpose it is immaterial whether the second article is sold or otherwise disposed of, or if sold, whether the sale is a taxable sale. Any article to which this paragraph applies which would have been used in the manufacture or production of a second article, except for the fact that it was broken or rendered useless in the process of manufacturing or producing the second article, will be considered to have been used as a component part of the second article.

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31084, July 9, 1991]

(a) Evidence to be submitted by claimant. No claim for credit or refund of an overpayment, within the meaning of section 6416(b)(3) of the Code and §53.181 shall be allowed unless the subsequent manufacturer submits with the claim the evidence required by §53.132 and a statement, supported by sufficient available evidence:

(1) Showing the amount claimed in respect of each category of exportations, uses, or sales on which the claim is based and which give rise to a right of credit or refund under section 6416(b)(3) of the Code and §53.180,

(2) Showing the name and address of the manufacturer, producer, or importer of the article in respect of which credit or refund is claimed,

(3) Identifying the article, both as to nature and quantity, in respect of which credit or refund is claimed,

(4) Showing the amount of tax paid in respect of the article by the manufacturer or producer of the article and the date of payment.

(5) Indicating that the article was used by the claimant as material in the manufacture or production of, or as a component part of, a second article manufactured or produced by the manufacturer or was sold on or in connection with, or with the sale of, a second article manufactured or produced by the manufacturer, and

(6) Identifying the second article, both as to nature and quantity.

(b) Evidence required to be in possession of claimant—(1) Certificate of ultimate purchaser of second article. The certificate executed and signed by the ultimate purchaser of the second article must contain the same information as that required in §53.179(b)(1)(ii), except that the information must be furnished in respect of the second article, rather than the article to which the claim relates.

(2) Certificate of ultimate vendor of second article. Any certificate executed and signed by an ultimate vendor as evidence to be retained by the person claiming credit or refund must be executed in the same form and manner as that provided in §53.179(b)(2)(iii).

(3) Repayment or consent of ultimate vendor. If the person claiming credit or refund of an overpayment to which this section applies has repaid, or agreed to repay, the amount of the overpayment to the ultimate vendor or if the ultimate vendor consents to the allowance of the credit or refund, a statement to that effect, signed by the ultimate vendor, must be shown on, or made a part of, the evidence required to be retained by the person claiming the credit or refund. In this regard, see §53.172(b)(2).

[T.D. ATF–308, 56 FR 303, Jan. 3, 1991, as amended by T.D. ATF–312, 56 FR 31085, July 9, 1991]

(a) In general. In the case of any payment of tax under section 4216(d)(1) of the Code in respect of the sale of any installment account that is determined to be an overpayment under section 6416(b)(5) of the Code and paragraph (b) of this section upon return of the installment account, the person who paid the tax may file a claim for refund of the overpayment or may claim credit for the overpayment on any return of tax under this subpart which that person subsequently files. No interest shall be paid on any credit or refund allowed under this section. For provisions relating to the evidence required in support of a claim for credit or refund under this section, see 27 CFR 70.123 (Procedure and Administration) and paragraph (c) of this section. For provisions authorizing the taking of a credit in lieu of filing a claim for refund, see section 6416(d) of the Code and §53.185.

(b) Overpayment of tax allocable to repaid consideration. The payment of tax imposed by section 4216(d)(1) of the Code on the sale of an installment account by the manufacturer will be considered to be an overpayment under section 6416(b)(5) of the Code to the extent of the tax allocable to any consideration repaid or credited to the purchaser of the installment account upon the return of the account to the manufacturer pursuant to the agreement under which the account originally was sold, if the readjustment of the consideration occurs pursuant to the provisions of the agreement. The tax allocable to the repaid or credited consideration is the amount which bears the same ratio to the total tax paid under section 4216(d)(1) of the Code with respect to the installment account as the amount of consideration repaid or credited to the purchaser bears to the total consideration for which the account was sold. This paragraph (b) does not apply where an installment account is originally sold pursuant to the order of, or subject to the approval of, a court of competent jurisdiction in a bankruptcy or insolvency proceeding.

(c) Evidence to be submitted by claimant. No claim for credit or refund of an overpayment, within the meaning of section 6416(b)(5) of the Code and paragraph (b) of this section, of tax under section 4216(d)(1) of the Code shall be allowed unless the person who paid the tax submits with the claim a statement, supported by sufficient available evidence, indicating:

(1) The name and address of the person to whom the installment account was sold,

(2) The amount of tax due under section 4216(d)(1) of the Code by reason of the sale of the installment account, the amount of the tax paid under section 4216(d)(1) with respect to the sale, and the date of payment,

(3) The amount for which the installment account was sold,

(4) The amount which was repaid or credited to the purchaser of the account by reason of the return of the account to the person claiming the credit or refund, and

(5)(i) The fact that the amount repaid or credited to the purchaser of the account was so repaid or credited pursuant to the agreement under which the account was sold, and

(ii) The fact that the account was returned to the manufacturer pursuant to that agreement.

(a) In general. Any payment of tax imposed by chapter 32 of the Code that is determined to be an overpayment within the meaning of section 6416(b)(2)(A) of the Code and §§53.178 and 53.179, by reason of the exportation of any article may be refunded to the exporter or shipper of the article pursuant to section 6416(c) of the Code, if:

(1) The exporter or shipper files a claim for refund of the overpayment, and

(2) The person who paid the tax waives the right to claim credit or refund of the tax.

No interest shall be paid on any refund allowed under this section. For provisions relating to the evidence required in support of a claim under this paragraph, see 27 CFR 70.123 (Procedure and Administration) and paragraph (b) of this section.

(b) Supporting evidence required. No claim for refund of any overpayment of tax to which this section applies shall be allowed unless the exporter or shipper submits with that claim proof of exportation in the form prescribed by §53.133, and a statement, signed by the person who paid the tax, showing:

(1) That the person who paid the tax waives the right to claim credit or refund of the tax, and

(2) The amount of tax paid on the sale of the article and the date of payment.

Any person entitled to claim refund of any overpayment of tax imposed by chapter 32 of the Code may, in lieu of claiming refund of the overpayment, claim credit for the overpayment on any return of tax under this subpart subsequently filed. Any such credit claimed on a return must be supported by the evidence prescribed in the applicable regulations in this subpart and 27 CFR 70.123 (Procedure and Administration).

(a) Identification of manufacturer. In applying section 6416 of the Code and the regulations thereunder, a person who has purchased like articles from various manufacturers may determine the particular manufacturer from whom that person purchased any one of those articles by a first-in, first-out (FIFO) method, by a last-in, first-out (LIFO) method, or by any other consistent method approved by the appropriate TTB officer. For the first year for which a person makes a determination under this section, the person may adopt any one of the following methods without securing prior approval by the appropriate TTB officer.

(1) FIFO method.

(2) LIFO method.

(3) Any method by which the actual manufacturer of the article is in fact identified.

(4) Any other method of determining the manufacturer of a particular article must be approved by the appropriate TTB officer before its adoption. After any method for identifying the manufacturer has been properly adopted, it may not be changed without first securing the consent of the appropriate TTB officer.

(b) Determining amount of tax paid. In applying section 6416 and §§53.171–53.186, if the identity of the manufacturer of any article has been determined by a person pursuant to a method prescribed in paragraph (a) of this section, that manufacturer of the article must determine the tax paid under Chapter 32 of the Code with respect to that article consistently with the method used in identifying the manufacturer.

(a) Purpose. This section collects and displays the control numbers assigned to collections of information in this part by the Office of Management and Budget (OMB) under the Paperwork Reduction Act of 1980. TTB intends that this section comply with the requirements of §§1320.12, 1320.13, and 1320.14 of 5 CFR part 1320 (OMB regulations implementing the Paperwork Reduction Act), for the display of control numbers assigned by OMB to collections of information in the regulations in this part.

(b) Display.