29 C.F.R. § 1915.5 Incorporation by reference.
Title 29 - Labor
(a) Specifications, standards, and codes of agencies of the U.S. Government, to the extent specified in the text, form a part of the regulations of this part. In addition, under the authority vested in the Secretary under the Act, the specifications, standards, and codes of organizations which are not agencies of the U.S. Government, in effect on the date of the promulgation of the regulations of this part as listed below, to the extent specified in the text, form a part of the regulations of this part. (b) The materials listed in paragraph (d) of this section are incorporated by reference in the corresponding sections noted as they exist on the date of the approval, and a notice of any change in these materials will be published in the (c) Copies of the following standards that are issued by the respective private standards organizations may be obtained from the issuing organizations. The materials are available for purchase at the corresponding addresses of the private standards organizations noted below. In addition, all are available for inspection through the OSHA Docket Office, room N2625, U.S. Department of Labor, 200 Constitution Ave., NW., Washington, DC 20210, or any of its regional offices or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.php. (d)(1) The following material is available for purchase from the American National Standards Institute, 11 West 42nd Street, New York, NY 10036. (i) ANSI A14.1–1975 Safety Requirements for Portable Wood Ladders, IBR approved for §1915.72(a)(6). (ii) ANSI A14.2–1972 Safety Requirements for Portable Metal Ladders, IBR approved for §1915.72(a)(4). (iii) ANSI B7.1–1964 Safety Code for the Use, Care, and Protection of Abrasive Wheels, IBR approval for §1915.134(c) (iv) ANSI Z87.1–1989 Practice for Occupational and Educational Eye and Face Protection, IBR approved for §1915.153(b)(1). (v) ANSI Z87.1–1979 Practice for Occupational and Educational Eye and Face Protection, IBR approved for §1915.153(b)(2). (vi) ANSI Z89.1–1986 Personnel Protection—Protective Headgear for Industrial Workers Requirements, IBR approved for §1915.155(b)(1) (vii) ANSI Z89.1–1969 Safety Requirement for Industrial Head Protection, IBR approved for §1915.155(b)(2). (viii) ANSI Z41–1991 Personal Protection—Protective Footwear, IBR approved for §1915.156(b)(1) (ix) ANSI Z41–1983 Personal Protection—Protective Footwear, IBR approved for §1915.156(b)(2). (2) The following material is available for purchase from the American Society of Mechanical Engineers, 345 East 47th Street, New York, New York 10017: (i) ASME Boiler and Pressure Vessel Code, Section VIII, Rules for Construction of Unfired Pressure Vessels, 1963, IBR approved for §1915.172(a). (3) The following material is available for purchase from the American Conference of Governmental Industrial Hygienists (ACGIH), 1014 Broadway, Cincinnati, OH 45202: (i) Threshold limit values, 1970, IBR approved for §§1915.12(b) and 1915.1000, table Z. (4) The following material is available for purchase from the National Fire Protection Association, 1 Batterymarch Park, PO Box 9101, Quincy, MA 02269–9101: (i) NFPA 1981–1997, Standard on Open-Circuit Self-Contained Breathing Apparatus for the Fire Service, IBR approved for §1915.505(e)(3)(v). (ii) NFPA 1971–2000, Standard on Protective Ensemble for Structural Fire Fighting, IBR approved for §1915.505(e)(4)(ii). (iii) NFPA 1976–2000, Standard on Protective Ensemble for Proximity Fire Fighting, IBR approved for §1915.505(e)(5). (iv) NFPA 1982–1998, Standard on Personal Alert Safety Systems (PASS), IBR approved for §1915.505(e)(6)(ii). (v) NFPA 1983–2001, Standard on Fire Service Life Safety Rope and System Components, IBR approved for §1915.505(e)(7)(i). (vi) NFPA 10–1998, Standard for Portable Fire Extinguishers, IBR approved for §1915.507(b)(1). (vii) NFPA 14–2000, Standard for the Installation of Standpipe, Private Hydrant, and Hose Systems, IBR approved for §1915.507(b)(2) and (d)(1). (viii) NFPA 72–1999, National Fire Alarm Code, IBR approved for §1915.507(c)(6). (ix) NFPA 13–1999, Installation of Sprinkler Systems, IBR approved for §1915.507(d)(2). (x) NFPA 750–2000, Standard on Water Mist Fire Protection Systems, IBR approved for §1915.507(d)(2). (xi) NFPA 25–2002, Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems, IBR approved for §1915.507(d)(2). (xii) NFPA 15–2001, Standard for Water Spray Fixed Systems for Fire Protection, IBR approved for §1915.507(d)(3). (xiii) NFPA 11–1998, Standard for Low-Expansion Foam, IBR approved for §1915.507(d)(3). (xiv) NFPA 11A–1999, Standard for Medium- and High-Expansion Foam Systems, IBR approved for §1915.507(d)(3). (xv) NFPA 17–2002, Standard for Dry Chemical Extinguishing Systems, IBR approved for §1915.507(d)(4). (xvi) NFPA 12–2000, Standard on Carbon Dioxide Extinguishing Systems, IBR approved for §1915.507(d)(5). (xvii) NFPA 12A–1997, Standard on Halon 1301 Fire Extinguishing Systems, IBR approved for §1915.507(d)(5). (xviii) NFPA 2001–2000, Standard on Clean Agent Fire Extinguishing Systems, IBR approved for §1915.507(d)(5). (xix) NFPA 1403–2002, Standard on Live Fire Training Evolutions, IBR approved for §1915.508(d)(8). [61 FR 26359, May 24, 1996, as amended at 67 FR 44541, July 3, 2002; 69 FR 18803, Apr. 9, 2004; 69 FR 55702, Sept. 15, 2004]
Title 29: Labor
PART 1915—OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT
Subpart A—General Provisions
§ 1915.5 Incorporation by reference.
