29 C.F.R. § 1917.3 Incorporation by reference.
Title 29 - Labor
(a) (1) The standards of agencies of the U.S. Government, and organizations which are not agencies of the U.S. Government which are incorporated by reference in this part, have the same force and effect as other standards in this part. Only the mandatory provisions (i.e. provisions containing the word “shall” or other mandatory language) of standards incorporated by reference are adopted as standards under the Occupational Safety and Health Act. (2) Any changes in the standards incorporated by reference in this part and an official historic file of such changes are available for inspection at the national office of the Occupational Safety and Health Administration, U.S. Department of Labor, Washington, DC 20210. (3) The materials listed in paragraph (b) of this section are incorporated by reference in the corresponding sections noted as they exist on the date of the approval, and a notice of any change in these materials will be published in the (4) Copies of the following standards that are issued by the respective private standards organizations may be obtained from the issuing organizations. The materials are available for purchase at the corresponding addresses of the private standards organizations noted in paragraph (b) of this section. In addition, all are available for inspection through the OSHA Docket Office, room N2625, U.S. Department of Labor, 200 Constitution Ave., Washington, DC 20210, or any of OSHA's regional offices or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.php. (b) The following material is available for purchase from the American National Standards Institute (ANSI), 11 West 42nd St., New York, NY 10036: (1) ANSI A14.1–1990, Safety Requirements for Portable Wood Ladders; IBR approved for §1917.119(c). (2) ANSI A14.2–1990, Safety Requirements for Portable Metal Ladders; IBR approved for §1917.119(c). (3) ANSI A14.5–1992, Safety Requirements for Portable Reinforced Plastic Ladders; IBR approved for §1917.119(c). (4) ANSI Z–87.1–1989, Practice for Occupational and Educational Eye and Face Protection; IBR approved for §1917.91(a)(1). (5) ANSI Z–89.1–1986, Personnel Protection-Protective Headwear for Industrial Workers-Requirements; IBR approved for §1917.93(b). (6) ANSI Z–41–1991, American National Standard for Personal Protection-Protective Footwear; IBR approved for §1917.94(b). (7) ASME B56.1, 1959, Safety Code for Powered Industrial Trucks, pages 8 and 13; IBR approved for §1917.50(j)(1). [62 FR 40196, July 25, 1997, as amended at 65 FR 40938, June 30, 2000; 69 FR 18803, Apr. 9, 2004]
Title 29: Labor
PART 1917—MARINE TERMINALS
Subpart A—General Provisions
§ 1917.3 Incorporation by reference.