33 C.F.R. § 183.5   Incorporation by reference.


Title 33 - Navigation and Navigable Waters


Title 33: Navigation and Navigable Waters
PART 183—BOATS AND ASSOCIATED EQUIPMENT
Subpart A—General

Browse Previous

§ 183.5   Incorporation by reference.

(a) Certain materials are incorporated by reference into this part with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a). To enforce any edition other than the one listed in paragraph (b) of this section, notice of change must be published in the Federal Register and the material made available to the public. All approved material is available for inspection at the Recreational Boating Product Assurance Division, Washington, DC 20593–0001, and at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.php. All approved material is available from the sources listed in paragraph (b) of this section.

(b) The materials approved for incorporation by reference in this part, and the sections affected are:

   Air Movement and Control Association, 30 W. University Drive, Arlington Heights, IL 60004:    AMCA 210-74:   § 183.610     Laboratory     Methods of     Testing Fans     for     Ratings_1974.American Boat and Yacht Council, Inc., 3069 Solomons Island Road, Edgewater, Maryland 21037- 1416:    ABYC A-16      § 183.810     Electric     Navigation     Lights-1997.American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959:    ASTM D 471-    §§ 183.114; 183.516;     96, Standard   183.607; 183.620     Test Method     for Rubber     Property_Eff     ect of     Liquids.    ASTM D 1621-   § 183.516     94, Standard     Test Method     for     Compressive     Properties     of Rigid     Cellular     Plastics.    ASTM D 1622-   § 183.516     93, Standard     Test Method     for Apparent     Density of     Rigid     Cellular     Plastics.    ASTM D 2842-   § 183.114     97, Standard     Test Method     for Water     Absorption     of Rigid     Cellular     Plastics.Institute of Electrical and Electronics, Engineers, Inc., 445 Hoes Lane, Piscataway, NJ 08854:    IEEE 45 IEEE   § 183.435     Recommended     Practice for     Electrical     Installation     s on     Shipboard_19     83. Cable     Construction.National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269:    NFPA No. 70    § 183.435     National     Electrical     Code_1987.     Articles 310     & 400.Naval Publications Forms Center, Customer Service_Code 1052, 5801 Tabor Avenue, Philadelphia, PA 19120:    MILSPEC-P-     § 183.516     21929B     Plastic     Material,     Cellular     Polyurethane     , Foam-In-     Place,     Rigid_1970.Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096:    SAE J378       § 183.430     Marine     Engine     Wiring_1984.    SAE J557 High  § 183.440     Tension     Ignition     Cable_1968.    SAE J1127      § 183.430     Battery     Cable_1980.    SAE J1128 Low  § 183.430     Tension     Primary     Cable_1975.    SAE            § 183.540     J1527DEC85     Marine Fuel     Hoses_1985.Underwriters Laboratories, Inc. (UL), 12 Laboratory Drive, Research Triangle Park, NC 27709-3995:    UL 1114        § 183.540     Marine (USCG     Type A)     Flexible     Fuel Line     Hose_1987.    UL 1128        § 183.610     Marine     Blowers_1977.    UL 1426        § 183.435     Cables for     Boats_1987.

[CGD 87–009, 53 FR 36971, Sept. 23, 1988, as amended by CGD 96–026, 61 FR 33670, June 28, 1996; USCG–1999–5151, 64 FR 67176, Dec. 1, 1999; USCG–2000–7223, 65 FR 40059, June 29, 2000; USCG–1999–6580, 66 FR 55091, Nov. 1, 2001; 69 18803, Apr. 9, 2004; USCG–2004–18057, 69 FR 34926, June 23, 2004]

Browse Previous


chanrobles.com