Title 46: Shipping
PART 56—PIPING SYSTEMS AND APPURTENANCES
Subpart 56.01—General
Browse Previous |
Browse Next
§ 56.01-2 Incorporation by reference.
(a) Certain standards and specifications are incorporated by reference into this part with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a). To enforce any edition other than the one listed in paragraph (b) of this section, notice of the change must be published in the Federal Register and the material made available to the public. All approved material is available from the sources indicated in paragraph (b) or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.php.
(b) The standards and specifications approved for incorporation by reference in this part, and the sections affected are:
American National Standards Institute (ANSI)
11 West 42nd Street, New York, NY 10036
ANSI B1.1–82 Unified Inch Screw Threads (UN and UNR Thread Form)56.60–1; 56.25–20ANSI B1.20.1–83 Pipe Threads, General Purpose (Inch)56.60–1ANSI B1.20.3–76 (reaffirmed 1982) Dryseal Pipe Threads (Inch) 56.60–1ANSI B16.1–75 Cast Iron Flanges and Flanged Fittings, Class 25, 125, 250 and 800 56.60–1; 56.60–10ANSI B16.3–85 Malleable Iron Threaded Fittings, Classes 150 and 30056.60–1ANSI B16.4–85 Cast Iron Threaded Fittings, Classes 125 and 25056.60–1ANSI B16.5–81 Pipe Flanges and Flanged Fittings56.25–20; 56.30–10; 56.60–1ANSI B16.9–86 Factory-Made Wrought Steel Buttwelding Fittings56.60–1ANSI B16.10–86 Face-to-Face and End-to-End Dimensions of Ferrous Valves56.60–1ANSI B16.11–80 Forged Steel Fittings, Socket-Welding and Threaded56.30–5; 56.60–1ANSI B16.14–83 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads56.60–1ANSI B16.15–85 Cast Bronze Threaded Fittings, Classes 125 and 25056.60–1ANSI B16.18–84 Cast Copper Alloy Solder Joint Pressure Fittings56.60–1ANSI B16.20–73 Ring-Joint Gaskets and Grooves for Steel Pipe Flanges VIII, Division 1, Pressure Vessels, 1986 with addenda56.15–1; 56.15–5; 56.15–10; 56.25–5; 56.30–10; 56.30–30; 56.60–15; 56.60–1; 56.95–10 Section IX, Welding and Brazing Qualifications, 1986 with addenda56.70–5; 56.70–20; 56.75–20; 56.0–1ANSI B16.24–79 Bronze Pipe Flanges and Flanged Fittings, Class 150 and 30056.60–1ANSI B16.25–86 Buttwelding Ends 56.60–1; 56.30–5; 56.70–10ANSI B16.28–86 Wrought Steel Buttwelding Short Radius Elbows and Returns56.60–1ANSI B16.29–86 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings—DWV56.60–1ANSI B16.34–88 Valves-Flanged, Threaded and Welding End56.20–1; 56.60–1ANSI B16.42–87 Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 30056.60–1ANSI B18.2.1–81 Square and Hex Bolts and Screws, Inch Series56.25–20; 56.60–1ANSI B18.2.2–87 Square and Hex Nuts 56.25–20; 56.60–1ANSI B31.1–86 Power Piping 56.01–5ANSI B36.10M–85 Welded and Seamless Wrought Steel Pipe56.07–5; 56.30–20; 56.60–1ANSI B36.19M–85 Stainless Steel Pipe56.07–5; 56.60–1
American Society of Mechanical Engineers (ASME) International
Three Park Avenue, New York, NY 10016–5990
Boiler and Pressure Vessel Code:
Section I, Power Boilers, 1986 with addenda56.15–5; 56.15–10; 56.60–1; 56.60–1; 56.70–15; 56.95–10 56.15–1 Section VIII, Division 1, Pressure Vessels, 1986 with addenda56.15–1; 56.15–5; 56.15–10; 56.25–5; 56.30–10; 56.30–30; 56.60–15; 56.60–1; 56.95–10 Section IX, Welding and Brazing Qualifications, 1986 with addenda56.70–5; 56.70–20; 56.75–20; 56.85–10
American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959.
ASTM A 36/A 36M–97a, Standard Specification for Carbon Structural Steel56.30–10ASTM A 47–90 (1995), Standard Specification for Ferritic Malleable Iron Castings56.60–1ASTM A 53–98, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless56.10–5; 56.60–1ASTM A 106–95, Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service56.60–1ASTM A 126–95, Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings56.60–1ASTM A 134–96, Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)56.60–1ASTM A 135–97c, Standard Specification for Electric-Resistance-Welded Steel Pipe56.60–1ASTM A 139–96, Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)56.60–1ASTM A 178/A 178M–95, Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes56.60–1ASTM A 179/A 179M–90a (1996), Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes56.60–1ASTM A 182/A 182M–97c, Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service56.50–105ASTM A 192/A 192M–91 (1996), Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service56.60–1ASTM A 194/A 194M–98b, Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both56.50–105ASTM A 197–87 (1992), Standard Specification for Cupola Malleable Iron56.60–1ASTM A 210/A 210M–96, Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes56.60–1ASTM A 213/A 213M–95a, Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes56.60–1ASTM A 214/A 214M–96, Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes56.60–1ASTM A 226/A 226M–95, Standard Specification for Electric-Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High-Pressure Service56.60–1ASTM A 234/A 234M–97, Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service56.60–1ASTM A 249/A 249M–96a, Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes56.60–1ASTM A 268/A 268M–96, Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service56.60–1ASTM A 276–98, Standard Specification for Stainless Steel Bars and Shapes56.60–2ASTM A 307–97, Standard Specification for Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength56.25–20ASTM A 312/A 312M–95a, Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes56.50–105; 56.60–1ASTM A 320/A 320M–97, Standard Specification for Alloy/Steel Bolting Materials for Low-Temperature Service56.50–105ASTM A 333/A 333M–94, Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service56.50–105; 56.60–1ASTM A 334/A 334M–96, Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service56.50–105; 56.60–1ASTM A 335/A 335M–95a, Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service56.60–1ASTM A 350/A 350M–97, Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components56.50–105ASTM A 351/A 351M–94a, Standard Specification for Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts56.50–105ASTM A 352/A 352M–93 (1998), Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service56.50–105ASTM A 358/A 358M–95a, Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service56.60–1ASTM A 369/A 369M–92, Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service56.60–1ASTM A 376/A 376M–96, Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service56.07–10; 56.60–1; 56.60–2ASTM A 395/A 395M–98, Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures56.50–60; 56.60–1; 56.60–15ASTM A 403/A 403M–98, Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings56.60–1ASTM A 420/A 420M–96a, Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service56.50–105; 56.60–1ASTM A 520–97, Standard Specification for Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction56.60–1ASTM A 522/A 522M–95b, Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service56.50–105ASTM A 536–84 (1993), Standard Specification for Ductile Iron Castings56.60–1ASTM A 575–96, Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades56.60–2ASTM A 576–90b (1995), Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality56.60–2ASTM B 16–92, Standard Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines56.60–2ASTM B 21–96, Standard Specification for Naval Brass Rod, Bar, and Shapes56.60–2ASTM B 26/B 26M–97, Standard Specification for Aluminum-Alloy Sand Castings56.60–2ASTM B 42–96, Standard Specification for Seamless Copper Pipe, Standard Sizes56.60–1ASTM B 43–96, Standard Specification for Seamless Red Brass Pipe, Standard Sizes56.60–1ASTM B 68–95, Standard Specification for Seamless Copper Tube, Bright Annealed56.60–1ASTM B 75–97, Standard Specification for Seamless Copper Tube56.60–1ASTM B 85–96, Standard Specification for Aluminum-Alloy Die Castings56.60–2ASTM B 88–96, Standard Specification for Seamless Copper Water Tube56.60–1ASTM B 96–93, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels56.60–2ASTM B 111–95, Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock56.60–1ASTM B 124–96, Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes56.60–2ASTM B 161–93, Standard Specification for Nickel Seamless Pipe and Tube56.60–1ASTM B 165–93, Standard Specification of Nickel-Copper Alloy (UNS NO4400) Seamless Pipe and Tube56.60–1ASTM B 167–97a, Standard Specification for Nickel-Chromium-Iron Alloys (UNS NO6600, NO6601, NO6603, NO6690, NO6025, and NO6045) Seamless Pipe and Tube56.60–1ASTM B 171–95, Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers56.60–2ASTM B 210–95, Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes56.60–1ASTM B 234–95, Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers56.60–1ASTM B 241/B 241M–96, Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube56.60–1ASTM B 280–97, Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service56.60–1ASTM B 283–96, Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)56.60–2ASTM B 315–93, Standard Specification for Seamless Copper Alloy Pipe and Tube56.60–1ASTM B 361–95, Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings56.60–1ASTM B 858M–95, Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using an Ammonia Vapor Test56.60–2ASTM D 635–97, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position56.60–25ASTM D 1785–96b, Standard Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe, Schedules 40, 80, and 12056.60–25ASTM D 2241–96b, Standard Specification for Poly (Vinyl Chloride)(PVC) Pressure-Rated Pipe (SDR Series)56.60–25ASTM D 2464–96a, Standard Specification for Threaded Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings Schedule 8056.60–25ASTM D 2466–97, Standard Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 4056.60–25ASTM D 2467–96a, Standard Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 8056.60–25ASTM D 2665–97b, Standard Specification for Poly (Vinyl Chloride)(PVC)Plastic Drain, Waste, and Vent Pipe and Fittings56.60–25ASTM D 2863–95, Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index)56.60–25ASTM E 23–96, Standard Test Methods for Notched Bar Impact Testing of Metallic Materials56.50–105ASTM F 682–82a (1993), Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings56.60–1ASTM F 1006–86 (1992), Standard Specification for Entrainment Separators for Use in Marine Piping Applications56.60–1ASTM F 1007–86 (1996), Standard Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application56.60–1ASTM F 1020–86 (1996), Standard Specification for Line-Blind Valves for Marine Applications56.60–1ASTM F 1120–87 (1993), Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications56.60–1ASTM F 1123–87 (1993), Standard Specification for Non-Metallic Expansion Joints56.60–1ASTM F 1139–88 (1993), Standard Specification for Steam Traps and Drains56.60–2ASTM F 1172–88 (1993), Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type56.60–1ASTM F 1173–95, Standard Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications56.60–1ASTM F 1199–88 (1993), Standard Specification for Cast (All Temperature and Pressures) and Welded Pipe Line Strainers (150 psig and 150 Degrees F Maximum)56.60–1ASTM F 1200–88 (1993), Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150 Degrees F)56.60–1ASTM F 1201–88 (1993), Standard Specification for Fluid Conditioner Fittings in Piping Applications above 0 Degrees F56.60–1ASTM F 1387–93, Standard Specification for Performance of Mechanically Attached Fittings56.30–25ASTM F 1476–95a, Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications56.30–35ASTM F 1548–94, Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings, Used in Piping Applications56.30–35
Expansion Joint Manufacturers Association Inc. (EJMA)
25 North Broadway, Tarrytown, NY 10591
Standards of the Expansion Joint Manufacturers Association, 198056.60–1
International Maritime Organization (IMO), Publications Section,
4 Albert Embankment, London, SE1 7SR United Kingdom
Resolution A.753(18) Guidelines for the Application of Plastic Pipes on Ships 56.60–25
Fluid Controls Institute Inc. (FCI)
31 South Street, Suite 303, Morristown, NJ 07960
FCI 69–1 Pressure Rating Standard for Steam Traps56.60–1
Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. (MSS)
127 Park Street NE, Vienna, VA 22180
SP–6–85 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings56.25–10; 56.60–1SP–9–87 Spot Facing for Bronze, Iron and Steel Flanges56.60–1SP–25–88 Standard Marking System for Valves, Fittings, Flanges and Unions56.15–1; 56.20–5; 56.60–1SP–44–85 Steel Pipe Line Flanges56.60–1SP–45–87 Bypass and Drain Connection Standard56.20–20; 56.60–1SP–51–86 Class 150LW Corrosion Resistant Cast Flanges and Flanged Fittings56.60–1SP–53–85 Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping Components—Magnetic Particle Examination Method56.60–1SP–55–85 Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components—Visual Method56.60–1SP–58–83 Pipe Hangers and Supports—Materials, Design and Manufacture56.60–1SP–61–85 Pressure Testing of Steel Valves56.60–1SP–67–83 Butterfly Valves56.60–1SP–69–83 Pipe Hangers and Supports—Selection and Application56.60–1SP–72–87 Ball Valves with Flanged or Butt-Welding Ends for General Service56.60–1SP–73–86 Brazing Joints for Wrought and Cast Copper Alloy Solder Joint Pressure Fittings56.60–1SP–83–87 Steel Pipe Unions, Socket-Welding and Threaded56.60–1
Society of Automotive Engineers (SAE)
400 Commonwealth Drive, Warrendale, Pa 15096
J1475–84 Hydraulic Hose Fittings for Marine Applications56.60–25J1942–89 Hose and Hose Assemblies for Marine Applications 56.60–25
[CGD 77–140, 54 FR 40599, Oct. 2, 1989; 55 FR 39968, Oct. 1, 1990, as amended by CGD 88–032, 56 FR 35822, July 29, 1991; CGD 95–012, 60 FR 48049, Sept. 18, 1995; CGD 95–027, 61 FR 26000, May 23, 1996; CGD 96–041, 61 FR 50728, Sept. 27, 1996; CGD 97–057, 62 FR 51044, Sept. 30, 1997; CGD 95–028, 62 FR 51200, Sept. 30, 1997; USCG–1999–6216, 64 FR 53224, Oct. 1, 1999; USCG–1999–5151, 64 FR 67178, Dec. 1, 1999; USCG–2004–18884, 69 FR 58346, Sept. 30, 2004]
