46 C.F.R. Subpart 111.25—Motors
Title 46 - Shipping
The requirements for generators contained in §111.12–5 apply to motors. [CGD 74–125A, 47 FR 15236, Apr. 8, 1982, as amended by CGD 94–108, 62 FR 23908, May 1, 1997] (a) Each motor must have a marking or nameplate that meets either article 430–7 of the NEC or IEC 92–301 (clause 16). (b) The marking or nameplate for each motor that is in a corrosive location must be corrosion-resistant. [CGD 74–125A, 47 FR 15236, Apr. 8, 1982, as amended by CGD 94–108, 61 FR 28278, June 4, 1996] Each motor must be rated for continuous duty, except a motor for an application listed in Table 111.25–15 or a similar duty must meet the minimum short-time rating stated in the table.
Title 46: Shipping
PART 111—ELECTRIC SYSTEMS—GENERAL REQUIREMENTS
Subpart 111.25—Motors
§ 111.25-1 General requirements.
§ 111.25-5 Marking.
§ 111.25-15 Duty cycle.
Table 111.25-15------------------------------------------------------------------------ Minimum short-time rating of Application of motor motor, in hours------------------------------------------------------------------------Deck winch and direct acting capstan...... Half.Deck winch with hydraulic transmission.... Continuous at no load followed by \1/2\ hr. at full load.Direct acting windlass.................... One fourth.Windlass with hydraulic transmission...... Half hour idle pump operation, followed by \1/ 4\ hr. full load operation.Steering gear, direct acting.............. One.Steering gear, indirect drive............. Continuous operation at 15 pct. load followed by 1 hr. at full load.Watertight door operators................. \1/12\.Boat winches.............................. \1/12\.------------------------------------------------------------------------
Browse Previous |
Browse Next
