Title 46: Shipping
PART 114—GENERAL PROVISIONS
Browse Previous |
Browse Next
§ 114.600 Incorporation by reference.
(a) Certain material is incorporated by reference into this subchapter with the approval of the Director of the Federal Register in accordance with Title 5 United States Code (U.S.C.) 552(a) and Title 1 Code of Federal Regulations (CFR) Part 51. To enforce any edition other than that specified in paragraph (b) of this section, the Coast Guard must publish a notice of change in the Federal Register and make the material available to the public. All approved material is on file at the U.S. Coast Guard, Office of Operating and Environmental Standards (G-MSO), 2100 Second Street SW., Washington, DC 20593–0001 or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.php. All material is available from the sources indicated in paragraph (b) of this section.
(b) The material approved for incorporation by reference in this subchapter and the sections affected are:
American Boat and Yacht Council (ABYC)
3069 Solomons Island Road, Edgewater, MD 21037
A–1–93—Marine Liquified Petroleum Gas (LPG) Systems121.240A–3–93—Galley Stoves121.200A–7–70—Boat Heating Systems121.200A–22–93—Marine Compressed Natural Gas (CNG) Systems121.240H–25–94—Portable Gasoline Fuel Systems for Flammable Liquids119.458P–1–93—Installation of Exhaust Systems for Propulsion and Auxiliary Engines116.405; 119.425; 119.430
American Bureau of Shipping (ABS)
ABS Plaza, 16855 Northchase Drive, Houston, TX 77060
Rules for Building and Classing Aluminum Vessels, 1975116.300Rules for Building and Classing Steel Vessels, 1995119.410; 120.360Rules for Building and Classing Steel Vessels Under 61 Meters (200 Feet) in Length, 1983116.300Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways, 1995116.300 Guide for High Speed Craft, 1997 116.300
American National Standards Institute (ANSI)
11 West 42nd Street, New York, NY 10036
A 17.1–1984, including supplements A 17.1a and b–1985—Safety Code for Elevators and Escalators120.540B 31.1–1986—Code for Pressure Piping, Power Piping119.710Z 26.1–1977, including 1980 supplement—Safety Glazing Materials For Glazing Motor Vehicles Operating on Land Highways116.1030
American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959
ASTM B 96–93, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels119.440ASTM B 117–97, Standard Practice for Operating Salt Spray (Fog) Apparatus114.400ASTM B 122/B 122M–95, Standard Specification for Copper-Nickel-Tin Alloy , Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar119.440ASTM B 127–98, Standard Specification for Nickel-Copper Alloy (UNS NO4400) Plate, Sheet, and Strip119.440ASTM B 152–97a, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar119.440ASTM B 209–96, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate119.440ASTM D 93–97, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester114.400ASTM D 635–97, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position119.440ASTM D 2863–95, Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index)119.440ASTM E 84–98, Standard Test Method for Surface Burning Characteristics of Building Materials116.405; 116.422; 116.423ASTM E 648–97, Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source114.400; 116.423ASTM E 662–97, Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials114.400; 116.423
Institute of Electrical and Electronics Engineers, Inc. (IEEE)
IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08854
Standard 45–1977—Recommended Practice for Electrical Installations on Shipboard120.340
International Maritime Organization (IMO)
International Maritime Organization, Publications Section, 4 Albert Embankment, London SE1 7SR United Kingdom
Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements—Resolution A.520(13), dated 17 November 1983114.540(c)Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances, Resolution A.658(16), dated 20 November 1989122.604Fire Test Procedures For Ignitability of Bedding Components, Resolution A.688(17) dated 06 November 1991116.405(j)Symbols Related to Life-Saving Appliances and Arrangements, Resolution A.760(18) dated 17 November 1993122.604(g)
National Fire Protection Association (NFPA)
1 Batterymarch Park, Quincy, MA 02269–9101
NFPA 10–1994—Portable Fire Extinguishers115.810NFPA 13–1996—Installation of Sprinkler Systems116.439NFPA 17–1994—Dry Chemical Extinguishing Systems118.425NFPA 17A–1994—Wet Chemical Extinguishing Systems118.425NFPA 70–1996—National Electrical Code (NEC)Section 250–95120.370Section 310–13120.340Section 310–15120.340Article 430120.320Article 445120.320NFPA 92B–1995—Smoke Management Systems in Malls, Atria, and Large Areas116.440NFPA 261–1994—Test For Determining Resistance of Mock-up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes114.400; 116.423NFPA 302–1994—Pleasure and Commercial Motor Craft, Chapter 6121.200; 121.240NFPA 306–1993—Control of Gas Hazards on Vessels115.710NFPA 701–1996—Fire Tests For Flame-Resistant Textiles and Films116.423NFPA 1963–1993—Fire Hose Connections118.320
Underwriters Laboratories Inc. (UL)
12 Laboratory Drive, Research Triangle Park, NC 27709
UL 19–1992—Lined Fire Hose and Hose Assemblies118.320UL 174–1989, as amended through June 23, 1994—Household Electric Storage Tank Water Heaters119.320UL 486A–1992—Wire Connectors and Soldering Lugs For Use With Copper Conductors120.340UL 489–1995—Molded-Case Circuit Breakers and Circuit Breaker Enclosures120.380UL 595–1991—Marine Type Electric Lighting Fixtures120.410UL 710–1990, as amended through September 16, 1993—Exhaust Hoods For Commercial Cooking Equipment118.425UL 723–1993, as amended through April 20, 1994—Surface Burning Characteristics of Building Materials114.400; 116.422; 116.423; 116.425UL 1056–1989—Fire Test of Upholstered Furniture116.423UL 1058–1989, as amended through April 19, 1994—Halogenated Agent Extinguishing System Units118.410UL 1102–1992—Non integral Marine Fuel Tanks119.440UL 1104–1981, as amended through May 4, 1988—Marine Navigation Lights120.420UL 1110–1988, as amended through May 16, 1994—Marine Combustible Gas Indicators119.480UL 1453–1988, as amended through June 7, 1994—Electric Booster and Commercial Storage Tank Water Heaters119.320UL 1570–1995—Fluorescent Lighting Fixtures120.410UL 1571–1995—Incandescent Lighting Fixtures120.410UL 1572–1995—High Intensity Discharge Lighting Fixtures120.410UL 1573–1995—Stage and Studio Lighting Units120.410UL 1574–1995—Track Lighting Systems120.410
[CGD 85–080, 61 FR 885, Jan. 10, 1996, as amended by CGD 96–041, 61 FR 50730, Sept. 27, 1996; CGD 97–057, 62 FR 51047, Sept. 30, 1997; CGD 85–080, 62 FR 51348, Sept. 30, 1997; USCG 1999–5151, 64 FR 67182, Dec. 1, 1999; USCG–2000–7790, 65 FR 58462, Sept. 29, 2000]
