---

46 C.F.R. § 153.1608   Calculation of total NLS residue and clingage NLS residue.

Title 46 - Shipping

Title 46: Shipping
PART 153—SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS
Subpart D—Test and Calculation Procedures for Determining Stripping Quantity, Clingage NLS Residue, and Total NLS Residue

Browse Previous

§ 153.1608   Calculation of total NLS residue and clingage NLS residue.

(a) The total NLS residue for each tank is calculated by adding the stripping quantity and the clingage NLS residue.

(b) The clingage NLS residue for each tank is calculated using the following formula:

Q_clingage=1.1×10⁻⁴ A_d+1.5×10⁻⁵ A_w+4.5×10⁻⁴ L^1/2 A_b

where:

A_b=Area of the tank bottom added to the area in square meters of tank structural components projected on a horizontal surface

A_d=Area of the tank underdecks added to the area in square meters of tank structural components projected on a horizontal surface

A_w=Area of the tank walls added to the area in square meters of tank structural components projected on a vertical surface

L=Length of tank in meters from fore to aft

Q_clingage=volume of clingage in cubic meters

When using the formula in this paragraph, areas that are inclined more than 30° from the horizontal may be assumed to be vertical.

Note: The Commandant (G-MSO) (tel# 202–267–1217) has information that may be useful in approximating surface areas of typical structural members for the projected area calculations under §153.1608(b).

Browse Previous