46 C.F.R. § 178.450 Calculation of drainage area for cockpit and well deck vessels.
Title 46 - Shipping
(a) The drainage area required on a vessel must be computed using the following formula: For protected waters required drainage = .1 × Basic Drainage For partially protected waters required drainage = .5 × Basis Drainage For exposed waters required drainage = Basic Drainage where: Basic Drainage area in centimeters2 = 4389.12 × [(Recess Volume × Recess Ratio) + (Weather Deck Volume × Weather Deck Ratio)]; or Basic Drainage area in inch2 = (Recess Volume × Recess Ratio) + (Weather Deck Volume × Weather Deck Ratio) Recess Volume = (BR × DR) − VR
BR=average height in centimeters (feet) of the bulwark above the well deck or cockpit deck; DR=total deck area of the cockpit or well deck in the after VR=volume of any weather tight structure below the bulwark of the well deck or cockpit deck. Recess Ratio = LR / LC
LR=the length of the recess in the after LC= Weather Deck Volume = (BD × DD) − VS
BD=average height in centimeters (feet) of the bulwark above the weather deck; DD=total deck area of the weather deck adjacent to bulwarks but not in way of the cockpit or well deck in the after VS=volume of any weather tight superstructure below the bulwark on the weather deck located within DD. Weather Deck Ratio = LD / LC
LD=the length of the weather deck bulwark in the after LC= (b) Vessels with bulwarks in the forward part of the vessel shall not form a well with the deckhouse which retains water. [CGD 85–080, 61 FR 966, Jan. 10, 1996; 61 FR 20557, May 7, 1996]
Title 46: Shipping
PART 178—INTACT STABILITY AND SEAWORTHINESS
Subpart D—Drainage of Weather Decks
§ 178.450 Calculation of drainage area for cockpit and well deck vessels.

