47 C.F.R. § 2.1060 Equipment for use in the amateur radio service.
Title 47 - Telecommunication
(a) The general provisions of §§2.925, 2.1031, 2.1033, 2.1041, 2.1043, 2.1051, 2.1053 and 2.1057 shall apply to applications for, and grants of, certification for equipment operated under the requirements of part 97 of this chapter, the Amateur Radio Service. (b) When performing the tests specified in §§2.1051 and 2.1053 of this part, the center of the transmitted bandwidth shall be within the operating frequency band by an amount equal to 50 percent of the bandwidth utilized for the tests. In addition, said tests shall be made on at least one frequency in each of the bands within which the equipment is capable of tuning. (c) Any supplier of an external radio frequency power amplifier kit as defined by §97.3(a)(17) of this chapter shall comply with the following requirements: (1) Assembly of one unit of a specific type shall be made in exact accordance with the instructions being supplied with the product being marketed. If all of the necessary components are not normally furnished with the kit, assembly shall be made using the recommended components. (2) The measurement data required for certification shall be obtained for this unit and submitted with the certification application. Unless otherwise requested, it is not necessary to submit this unit with the application. (3) A copy of the exact instructions which will be provided for assembly of the equipment shall be provided in addition to other material required by §2.1033 of this part. (4) The identification label required by §2.925 of this part shall be permanently affixed to the assembled unit and shall be of sufficient size so as to be easily read. The following information shall be shown on the label:
(Name of Grantee of Certification) FCC ID: (The number assigned to the equipment by the grantor) This amplifier can be expected to comply with part 97 of the FCC Regulations when assembled and aligned in strict accordance with the instruction manual using components with the kit or an exact equivalent thereof. (Title and signature of responsible representative of Grantee) Statement of Compliance I state that I have constructed this equipment in accordance with the instruction manual and using the parts furnished by the supplier of this kit. (Signature) ________________________________ (Date) (Amateur call sign) (Class of license) (Expiration date of license) (To be signed by the person responsible for proper assembly of kit.) (5) If requested, an unassembled unit shall be provided for assembly and test by the Commission. Shipping charges to and from the Commission's Laboratory shall be borne by the applicant. (d) Certification of external radio frequency power amplifiers and amplifier kits may be denied when denial serves the public interest, convenience and necessity by preventing the use of these amplifiers in services other than the Amateur Radio Service. Other uses of these amplifiers, such as in the Citizens Band Radio Service, are prohibited (§95.411 of this chapter). Examples of features which may result in the denial of certification are contained in §97.317 of this chapter. [63 FR 36601, July 7, 1998]
Title 47: Telecommunication
PART 2—FREQUENCY ALLOCATIONS AND RADIO TREATY MATTERS; GENERAL RULES AND REGULATIONS
Subpart J—Equipment Authorization Procedures
Certification
§ 2.1060 Equipment for use in the amateur radio service.
