49 C.F.R. 49 CFR--PART 171
Title 49 - Transportation
Effective Date(s): September 11, 2006 7. In §171.7, in the table in paragraph (a)(3) make the following changes: a. Under Compressed Gas Association Inc., a new entry for CGA S–1.1, 2003 edition, is added; b. Under General Services Administration, the entry Federal Specification RRC901C is removed, and an entry for RR-C–901D is added; c. Revise the entry for “International Organization for Standardization,” and d. Under “United Nations,” the entry for UN Recommendations on the Transport of Dangerous Goods is revised. The revisions and additions read as follows: (a) * * * (3) Table of material incorporated by reference. * * *
Amendment from June 12, 2006
49 CFR--PART 171
Amendment(s) published June 12, 2006, in 71 FR 33874
§ 171.7 Reference material.
---------------------------------------------------------------------------------------------------------------- Source and name of material 49 CFR reference---------------------------------------------------------------------------------------------------------------- * * * * * * *Compressed Gas Association, Inc., * * * * * * * CGA Pamphlet S-1.1, Pressure Relief 173.301, 178.75. Device Standards_Part 1_Cylinders for Compressed Gases, 2003 (with the exception of paragraph 9.1.1.1), Eleventh Edition. * * * * * * *General Services Administration, * * * * * * * Federal Specification RR-C-901D, 173.302; 173.336; 173.337. Cylinders, Compressed Gas: Seamless Shatterproof, High Pressure DOT 3AA Steel, and 3AL Aluminum, February 21, 2003 (Superseding RR-C-901C, 1981). * * * * * * *International Organization for Standardization, Case Postale 56, CH-1211, Geneve 20, Switzerland;Also available from: ANSI 25 West 43rd Street, New York, NY 10036 ISO 82-74(E) Steels Tensile Testing..... 178.270-3. ISO 535-1991(E) Paper and 178.516; 178.707; 178.708. board_Determination of water absorptiveness_Cobb method. ISO 1496-1: 1990 (E)_Series 1 freight 173.411 containers_Specification and testing, Part 1: General cargo containers. Fifth Edition, (August 15, 1990). ISO 1496-3_Series 1 freight 178.74; 178.75; 178.274. containers_Specification and testing_Part 3: Tank containers for liquids, gases and pressurized dry bulk, Fourth edition, March 1995, (E). ISO 2431-1984(E) Standard Cup Method.... 173.121. ISO 2592-1973(E) Petroleum 173.120. products_Determination of flash and fire points_Cleveland open cup method. ISO 2919-1980(E) Sealed radioactive 173.469. sources_Classification. ISO 3036-1975(E) Board_Determination of 178.708. puncture resistance. ISO 3574-1986(E) Cold-reduced carbon 178.503; Part 178, appendix C. steel sheet of commercial and drawing qualities.ISO 3807-2, Cylinders for acetylene_Basic 173.303; 178.71. requirements_Part 2: Cylinders with fusible plugs, First edition, March 2000, (E).ISO 4126-1 Safety valves_Part 1: General 178.274. Requirements, December 15, 1991, First Edition.ISO 6406, Gas cylinders_Seamless steel gas 180.207. cylinders_Periodic inspection and testing, Second edition, February 2005, (E).ISO 6892 Metallic materials_Tensile testing, 178.274. July 15, 1984, First Edition.ISO 7225, Gas cylinders_Precautionary 178.71. labels, First edition, November 1994, (Corrected and reprinted August 1995), (E).ISO 7866, Gas cylinders_Refillable seamless 178.71. aluminum alloy gas cylinders_Design, construction and testing, First edition, June 1999, (E).ISO 8115 Cotton bales_Dimensions and 172.102. density, 1986 Edition.ISO 9809-1: Gas cylinders_Refillable 178.71; 178.75. seamless steel gas cylinders_Design, construction and testing_Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa., First edition, June 1999, (E).ISO 9809-2: Gas cylinders_Refillable 178.71; 178.75. seamless steel gas cylinders_Design, construction and testing_Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa., First edition, June 2000, (E).ISO 9809-3: Gas cylinders_Refillable 178.71; 178.75. seamless steel gas cylinders_Design, construction and testing_Part 3: Normalized steel cylinders, First edition, December 2000, (E).ISO 9978:1992(E)_Radiation protection_Sealed 173.469. radioactive sources_Leakage test methods. First Edition, (February 15, 1992).ISO 10297, Gas cylinders_Refillable gas 173.301b, 178.71. cylinder valves_Specification and type testing, First edition, May 1999, (E).ISO 10461, Gas cylinders_Seamless 180.207. aluminum_alloy gas cylinders_Periodic inspection and testing, Second edition, February 2005, (E).ISO 10462, Gas cylinders_Transportable 180.207. cylinders for dissolved acetylene_Periodic inspection and maintenance, Second edition, February 2005, (E).ISO 11114-1, Transportable gas 173.301b; 178.71. cylinders_Compatibility of cylinder and valve materials with gas contents_Part 1: Metallic materials, First edition, October 1997, (E). ISO 11114-2, Transportable gas 173.301b; 178.71. cylinders_Compatibility of cylinder and valve materials with gas contents_Part 2: Non-metallic materials, First edition, December 2000, (E). ISO 11117, Gas cylinders_Valve 173.301b. protection caps and valve guards for industrial and medical gas cylinders_Design, construction and tests, First edition, August 1998, (E). ISO 11118, Gas cylinders_Non-refillable 178.71. metallic gas cylinders_Specification and test methods, First edition, October 1999, (E). ISO 11119-1, Gas cylinders_Gas cylinders 178.71. of composite construction_Specification and test methods_Part 1: Hoop-wrapped composite gas cylinders, First edition, May 2002, (E). ISO 11119-2, Gas cylinders_Gas cylinders 178.71. of composite construction_Specification and test methods_Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners, First edition, May 2002, (E). ISO 11119-3, Gas cylinders of composite 178.71. construction_Specification and test methods_Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non- metallic liners, First edition, September 2002, (E). ISO 11120, Gas cylinders_Refillable 178.71; 178.75. seamless steel tubes of water capacity between 150 L and 3000 L_Design, construction and testing, First edition, March 1999, (E). ISO 11621, Gas cylinders_Procedures for 173.302, 173.336, 173.337. change of gas service, First edition, April 1997, (E). ISO 11623, Transportable gas 180.207. cylinders_Periodic inspection and testing of composite gas cylinders, First edition, March 2002, (E). * * * * * * *United Nations, * * * * * * *UN Recommendations on the Transport of 171.12; 172.202; 172.401; 172.502; 173.22; 173.24; 173.24b; Dangerous Goods, Thirteenth Revised Edition 173.40; 173.192; 173.197; 173.302b; 173.304b; Part 173, appendix (2003), Volumes I and II. H; 178.75; 178.274; 178.801. * * * * * * *----------------------------------------------------------------------------------------------------------------
