49 C.F.R. § 178.348-4 Pressure relief.
Title 49 - Transportation
(a) Each cargo tank must be equipped with a pressure and vacuum relief system in accordance with §178.345–10 and this section. (b) Type and construction. Vacuum relief devices are not required for cargo tanks designed to be loaded by vacuum or built to withstand full vacuum. (c) Pressure settings of relief valves. The setting of the pressure relief devices must be in accordance with §178.345–10(d), except as provided in paragraph (d)(3) of this section. (d) Venting capacities. (1) The vacuum relief system must limit the vacuum to less than 80 percent of the design vacuum capability of the cargo tank. (2) If pressure loading or unloading devices are provided, the pressure relief system must have adequate vapor and liquid capacity to limit tank pressure to the cargo tank test pressure at the maximum loading or unloading rate. The maximum loading and unloading rates must be included on the metal specification plate. (3) Cargo tanks used in dedicated service for materials classed as corrosive material, with no secondary hazard, may have a total venting capacity which is less than required by §178.345–10(e). The minimum total venting capacity for these cargo tanks must be determined in accordance with the formula contained in §178.270–11(d)(3). Use of the approximate values given for the formula in §178.270–11(d)(3) is acceptable. [Amdt. 178–89, 54 FR 25032, June 12, 1989, as amended at 55 FR 37065, Sept. 7, 1990; Amdt. 178–104, 59 FR 49135, Sept. 26, 1994. Redesignated by Amdt. 178–112, 61 FR 18934, Apr. 29, 1996]
Title 49: Transportation
PART 178—SPECIFICATIONS FOR PACKAGINGS
Subpart J—Specifications for Containers for Motor Vehicle Transportation
§ 178.348-4 Pressure relief.
