49 C.F.R. § 238.223 Locomotive fuel tanks.
Title 49 - Transportation
Locomotive fuel tanks shall comply with either the following or an industry standard providing at least an equivalent level of safety if approved by FRA under §238.21: (a) External fuel tanks. External locomotive fuel tanks shall comply with the requirements contained in Appendix D to this part. (b) Internal fuel tanks. (1) Internal locomotive fuel tanks shall be positioned in a manner to reduce the likelihood of accidental penetration from roadway debris or collision. (2) Internal fuel tank vent systems shall be designed so they do not become a path of fuel loss in any tank orientation due to a locomotive overturning. (3) Internal fuel tank bulkheads and skin shall, at a minimum, be equivalent to a 5/16-inch thick steel plate with a yield strength of 25,000 pounds per square inch. Material of a higher yield strength may be used to decrease the required thickness of the material provided at least an equivalent level of strength is maintained. Skid plates are not required. [67 FR 19991, Apr. 23, 2002]
Title 49: Transportation
PART 238—PASSENGER EQUIPMENT SAFETY STANDARDS
Subpart C—Specific Requirements for Tier I Passenger Equipment
§ 238.223 Locomotive fuel tanks.
