49 C.F.R. § 213.327   Alinement.


Title 49 - Transportation


Title 49: Transportation
PART 213—TRACK SAFETY STANDARDS
Subpart G—Train Operations at Track Classes 6 and Higher

Browse Previous |  Browse Next

§ 213.327   Alinement.

(a) Uniformity at any point along the track is established by averaging the measured mid-chord offset values for nine consecutive points centered around that point and which are spaced according to the following table:

 ------------------------------------------------------------------------                Chord length                           Spacing------------------------------------------------------------------------31[foot]...................................  7[foot]9[inch]62[foot]...................................  15[foot]6[inch]124[foot]..................................  31[foot]0[inch]------------------------------------------------------------------------

(b) For a single deviation, alinement may not deviate from uniformity more than the amount prescribed in the following table:

 ----------------------------------------------------------------------------------------------------------------                                                                   The deviation   The deviation   The deviation                                                                       from            from            from                                                                   uniformity of   uniformity of   uniformity of                                                                   the mid-chord   the mid-chord   the mid-chord                         Class of track                            offset for a    offset for a    offset for a                                                                   31-foot chord   62-foot chord  124-foot chord                                                                    may not be      may not be      may not be                                                                    more than_      more than_      more than_                                                                     (inches)        (inches)        (inches)----------------------------------------------------------------------------------------------------------------6...............................................................           \1/2\           \3/4\          1\1/2\7...............................................................           \1/2\           \1/2\          1\1/4\8...............................................................           \1/2\           \1/2\           \3/4\9...............................................................           \1/2\           \1/2\           \3/4\----------------------------------------------------------------------------------------------------------------

(c) For three or more non-overlapping deviations from uniformity in track alinement occurring within a distance equal to five times the specified chord length, each of which exceeds the limits in the following table, each owner of the track to which this subpart applies shall maintain the alinement of the track within the limits prescribed for each deviation:

 ----------------------------------------------------------------------------------------------------------------                                                                   The deviation   The deviation   The deviation                                                                       from            from            from                                                                   uniformity of   uniformity of   uniformity of                                                                   the mid-chord   the mid-chord   the mid-chord                         Class of track                            offset for a    offset for a    offset for a                                                                   31-foot chord   62-foot chord  124-foot chord                                                                    may not be      may not be      may not be                                                                    more than_      more than_      more than_                                                                     (inches)        (inches)        (inches)----------------------------------------------------------------------------------------------------------------6...............................................................           \3/8\           \1/2\               17...............................................................           \3/8\           \3/8\           \7/8\8...............................................................           \3/8\           \3/8\           \1/2\9...............................................................           \3/8\           \3/8\           \1/2\----------------------------------------------------------------------------------------------------------------

Browse Previous |  Browse Next

chanrobles.com