---

29 C.F.R. PART 1910--OCCUPATIONAL SAFETY AND HEALTH STANDARDS

TITLE 29--Labor

Subtitle B--REGULATIONS RELATING TO LABOR

CHAPTER XVII--OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR

PART 1910--OCCUPATIONAL SAFETY AND HEALTH STANDARDS

Subpart A--GENERAL

�1910.1

Purpose and scope.

�1910.2

Definitions.

�1910.3

Petitions for the issuance, amendment, or repeal of a standard.

�1910.4

Amendments to this part.

�1910.5

Applicability of standards.

�1910.6

Incorporation by reference.

�1910.7

Definition and requirements for a nationally recognized testing laboratory.

�1910.8

OMB control numbers under the Paperwork Reduction Act.

Subpart B--ADOPTION AND EXTENSION OF ESTABLISHED FEDERAL STANDARDS

�1910.11

Scope and purpose.

�1910.12

Construction work.

�1910.15

Shipyard employment.

�1910.16

Longshoring and marine terminals.

�1910.17

Effective dates.

�1910.18

Changes in established Federal standards.

�1910.19

Special provisions for air contaminants.

Subpart C--[RESERVED]

Subpart D--WALKING-WORKING SURFACES

�1910.21

Definitions.

�1910.22

General requirements.

�1910.23

Guarding floor and wall openings and holes.

�1910.24

Fixed industrial stairs.

�1910.25

Portable wood ladders.

�1910.26

Portable metal ladders.

�1910.27

Fixed ladders.

�1910.28

Safety requirements for scaffolding.

�1910.29

Manually propelled mobile ladder stands and scaffolds (towers).

�1910.30

Other working surfaces.

Subpart E--MEANS OF EGRESS

�1910.33

Table of contents.

�1910.34

Coverage and definitions.

�1910.35

Compliance with NFPA 101-2000, Life Safety Code.

�1910.36

Design and construction requirements for exit routes.

�1910.37

Maintenance, safeguards, and operational features for exit routes.

�1910.38

Emergency action plans.

�1910.39

Fire prevention plans.

Appendix

Appendix to Subpart E of Part 1910--Exit Routes, Emergency Action Plans, and Fire Prevention Plans

Subpart F--POWERED PLATFORMS, MANLIFTS, AND VEHICLE-MOUNTED WORK PLATFORMS

�1910.66

Powered platforms for building maintenance.

�1910.67

Vehicle-mounted elevating and rotating work platforms.

�1910.68

Manlifts.

Subpart G--OCCUPATIONAL HEALTH AND ENVIRONMENTAL CONTROL

�1910.94

Ventilation.

�1910.95

Occupational noise exposure.

�1910.97

Nonionizing radiation.

�1910.98

Effective dates.

Subpart H--HAZARDOUS MATERIALS

�1910.101

Compressed gases (general requirements).

�1910.102

Acetylene.

�1910.103

Hydrogen.

�1910.104

Oxygen.

�1910.105

Nitrous oxide.

�1910.106

Flammable and combustible liquids.

�1910.107

Spray finishing using flammable and combustible materials.

�1910.108

[Reserved]

�1910.109

Explosives and blasting agents.

�1910.110

Storage and handling of liquefied petroleum gases.

�1910.111

Storage and handling of anhydrous ammonia.

��1910.112-1910.113

[Reserved]

�1910.119

Process safety management of highly hazardous chemicals.

�1910.120

Hazardous waste operations and emergency response.

�1910.121

[Reserved]

�1910.122

Table of contents.

�1910.123

Dipping and coating operations: Coverage and definitions.

�1910.124

General requirements for dipping and coating operations.

�1910.125

Additional requirements for dipping and coating operations that use flammable or combustible liquids.

�1910.126

Additional requirements for special dipping and coating operations.

Subpart I--PERSONAL PROTECTIVE EQUIPMENT

�1910.132

General requirements.

�1910.133

Eye and face protection.

�1910.134

Respiratory protection.

�1910.135

Head protection.

�1910.136

Foot protection.

�1910.137

Electrical protective equipment.

�1910.138

Hand protection.

Appendix

Appendix A to Subpart I of Part 1910--References for Further Information (Non-mandatory)

Appendix

Appendix B to Subpart I to Part 1910--Non-mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection

Subpart J--GENERAL ENVIRONMENTAL CONTROLS

�1910.141

Sanitation.

�1910.142

Temporary labor camps.

�1910.143

Nonwater carriage disposal systems.--[Reserved]

�1910.144

Safety color code for marking physical hazards.

�1910.145

Specifications for accident prevention signs and tags.

�1910.146

Permit-required confined spaces.

�1910.147

The control of hazardous energy (lockout/tagout).

Subpart K--MEDICAL AND FIRST AID

�1910.151

Medical services and first aid.

�1910.152

[Reserved]

Subpart L--FIRE PROTECTION

�1910.155

Scope, application and definitions applicable to this subpart.

�1910.156

Fire brigades.

�1910.157

Portable fire extinguishers.

�1910.158

Standpipe and hose systems.

�1910.159

Automatic sprinkler systems.

�1910.160

Fixed extinguishing systems, general.

�1910.161

Fixed extinguishing systems, dry chemical.

�1910.162

Fixed extinguishing systems, gaseous agent.

�1910.163

Fixed extinguishing systems, water spray and foam.

�1910.164

Fire detection systems.

�1910.165

Employee alarm systems.

Appendix

Appendices to Subpart L of Part 1910--Note

Appendix

Appendix A to Subpart L of Part 1910--Fire Protection

Appendix

Appendix B to Subpart L of Part 1910--National Consensus Standards

Appendix

Appendix C to Subpart L of Part 1910--Fire Protection References For Further Information

Appendix

Appendix D to Subpart L of Part 1910--Availability of Publications Incorporated by Reference in Section 1910.156 Fire Brigades

Appendix

Appendix E to Subpart L of Part 1910--Test Methods for Protective Clothing

Subpart M--COMPRESSED GAS AND COMPRESSED AIR EQUIPMENT

��1910.166-1910.168

[Reserved]

�1910.169

Air receivers.

Subpart N--MATERIALS HANDLING AND STORAGE

�1910.176

Handling materials--general.

�1910.177

Servicing multi-piece and single piece rim wheels.

�1910.178

Powered industrial trucks.

�1910.179

Overhead and gantry cranes.

�1910.180

Crawler locomotive and truck cranes.

�1910.181

Derricks.

�1910.183

Helicopters.

�1910.184

Slings.

Subpart O--MACHINERY AND MACHINE GUARDING

�1910.211

Definitions.

�1910.212

General requirements for all machines.

�1910.213

Woodworking machinery requirements.

�1910.214

Cooperage machinery.--[Reserved]

�1910.215

Abrasive wheel machinery.

�1910.216

Mills and calenders in the rubber and plastics industries.

�1910.217

Mechanical power presses.

�1910.218

Forging machines.

�1910.219

Mechanical power-transmission apparatus.

Subpart P--HAND AND PORTABLE POWERED TOOLS AND OTHER HAND-HELD EQUIPMENT

�1910.241

Definitions.

�1910.242

Hand and portable powered tools and equipment, general.

�1910.243

Guarding of portable powered tools.

�1910.244

Other portable tools and equipment.

Subpart Q--WELDING, CUTTING AND BRAZING

�1910.251

Definitions.

�1910.252

General requirements.

�1910.253

Oxygen-fuel gas welding and cutting.

�1910.254

Arc welding and cutting.

�1910.255

Resistance welding.

Subpart R--SPECIAL INDUSTRIES

�1910.261

Pulp, paper, and paperboard mills.

�1910.262

Textiles.

�1910.263

Bakery equipment.

�1910.264

Laundry machinery and operations.

�1910.265

Sawmills.

�1910.266

Logging operations.

�1910.268

Telecommunications.

�1910.269

Electric power generation, transmission, and distribution.

�1910.272

Grain handling facilities.

Subpart S--ELECTRICAL

�1910.301

Introduction.

�1910.302

Electric utilization systems.

�1910.303

General requirements.

�1910.304

Wiring design and protection.

�1910.305

Wiring methods, components, and equipment for general use.

�1910.306

Specific purpose equipment and installations.

�1910.307

Hazardous (classified) locations.

�1910.308

Special systems.

��1910.309-1910.330

[Reserved]

�1910.331

Scope.

�1910.332

Training.

�1910.333

Selection and use of work practices.

�1910.334

Use of equipment.

�1910.335

Safeguards for personnel protection.

��1910.336-1910.360

[Reserved]

��1910.361-1910.380

[Reserved]

��1910.381-1910.398

[Reserved]

�1910.399

Definitions applicable to this subpart.

Appendix

Appendix A to Subpart S of Part 1910--Reference Documents

Appendix

Appendix B to Subpart S of Part 1910--Explanatory Data--[Reserved]

Appendix

Appendix C to Subpart S of Part 1910--Tables, Notes, and Charts--[Reserved]

Subpart T--COMMERCIAL DIVING OPERATIONS

�1910.401

Scope and application.

�1910.402

Definitions.

�1910.410

Qualifications of dive team.

�1910.420

Safe practices manual.

�1910.421

Pre-dive procedures.

�1910.422

Procedures during dive.

�1910.423

Post-dive procedures.

�1910.424

SCUBA diving.

�1910.425

Surface-supplied air diving.

�1910.426

Mixed-gas diving.

�1910.427

Liveboating.

�1910.430

Equipment.

�1910.440

Recordkeeping requirements.

Appendix

Appendix A to Subpart T to Part 1910--Examples of Conditions Which May Restrict or Limit Exposure to Hyperbaric Conditions

Appendix

Appendix B to Subpart T to Part 1910--Guidelines for Scientific Diving

Appendix

Appendix C to Subpart T to Part 1910--Alternative Conditions Under 1910.401(a)(3) for Recreational Diving Instructors and Diving Guides (Mandatory)

Subparts U-Y--[RESERVED]

��1910.901-1910.999

[Reserved]