30 C.F.R. § 250.102 What does this part do?
Title 30 - Mineral Resources
(a) 30 CFR part 250 contains the regulations of the MMS Offshore program that govern oil, gas, and sulphur exploration, development, and production operations on the OCS. When you conduct operations on the OCS, you must submit requests, applications, and notices, or provide supplemental information for MMS approval. (b) The following table of general references shows where to look for information about these processes. [64 FR 72775, Dec. 28, 1999, as amended at 67 FR 35405, May 17, 2002; 68 FR 8422, Feb. 20, 2003; 70 FR 51500, Aug. 30, 2005]
Title 30: Mineral Resources
PART 250—OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF
Subpart A—General
Authority and Definition of Terms
§ 250.102 What does this part do?
Table_Where To Find Information for Conducting Operations------------------------------------------------------------------------ For information about Refer to------------------------------------------------------------------------ (1) Applications for permit to drill........ § 250.410. (2) Development and Production Plans (DPP).. §§ 250.241 through 250.262. (3) Downhole commingling.................... § 250.1106. (4) Exploration Plans (EP).................. §§ 250.211 through 250.228. (5) Flaring................................. § 250.1105. (6) Gas measurement......................... § 250.1203. (7) Off-lease geological and geophysical 30 CFR 251. permits. (8) Oil spill financial responsibility 30 CFR 253. coverage.(9) Oil and gas production safety systems.... § 250.802.(10) Oil spill response plans................ 30 CFR 254.(11) Oil and gas well-completion operations.. § 250.513.(12) Oil and gas well-workover operations.... § 250.613.(13) Permanently plugging wells.............. § 250.1710(14) Platforms and structures................ § 250.901.(15) Pipelines............................... § 250.1009.(16) Pipeline right-of-way................... § 250.1010.(17) Sulphur operations...................... § 250.1604.(18) Training................................ § 250.1500.(19) Unitization............................. § 250.1300.------------------------------------------------------------------------