46 C.F.R. Subpart 52.15—Requirements for Watertube Boilers
Title 46 - Shipping
Watertube boilers and parts thereof shall be as indicated in PWT–1 through PWT–15 of the ASME Code except as noted otherwise in this subpart. [CGD 81–79, 50 FR 9434, Mar. 8, 1985] (a) Tubes, pipe and nipples shall be attached to sheets, heads, headers, and fittings as indicated in PWT–11 of the ASME Code except as noted otherwise in this section. (b) (Replaces PWT–9.2 and PWT–11.3.) Threaded boiler tubes shall not be permitted as described by PWT–9.2 and PWT–11.3 of the ASME Code. (c) In welded wall construction employing stub and welded wall panels which are field welded, approximately 10 percent of the field welds shall be checked using any acceptable nondestructive test method. (d) Nondestructive testing of the butt welded joints shall meet the requirements of §56.95–10 of this subchapter. [CGFR 68–82, 33 FR 18815, Dec. 18, 1968, as amended by CGFR 69–127, 35 FR 9976, June 17, 1970; CGD 81–79, 50 FR 9434, Mar. 8, 1985]
Title 46: Shipping
PART 52—POWER BOILERS
Subpart 52.15—Requirements for Watertube Boilers
§ 52.15-1 General (modifies PWT–1through PWT–15).
§ 52.15-5 Tube connections (modifies PWT–9 and PWT–11).
