46 C.F.R. PART 170--STABILITY REQUIREMENTS FOR ALL INSPECTED VESSELS
TITLE 46--Shipping
CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
SUBCHAPTER S--SUBDIVISION AND STABILITY
PART 170--STABILITY REQUIREMENTS FOR ALL INSPECTED VESSELS
Subpart A--GENERAL PROVISIONS
|
Vessel alteration or repair.
|
|
|
Incorporation by reference.
|
|
|
OMB control numbers assigned pursuant to the Paperwork Reduction Act.
|
|
Subpart B--DEFINITIONS
|
Definitions concerning a vessel.
|
|
Subpart C--PLAN APPROVAL
|
Information required before a stability test.
|
|
|
Data submittal for a vessel equipped to lift.
|
|
|
Addresses for submittal of plans and calculations.
|
|
Subpart D--STABILITY INSTRUCTIONS FOR OPERATING PERSONNEL
|
Operating information for a vessel engaged in lifting.
|
|
|
Operating information for a vessel with Type III subdivision.
|
|
Subpart E--WEATHER CRITERIA
|
Criterion for vessels of unusual proportion and form.
|
|
Subpart F--DETERMINATION OF LIGHTWEIGHT DISPLACEMENT AND CENTERS OF GRAVITY
|
Plans and information required at the stability test.
|
|
|
Stability test preparations.
|
|
|
Stability test procedure modifications.
|
|
|
Estimated lightweight vertical center of gravity.
|
|
Subpart G--SPECIAL INSTALLATIONS
Subpart H--WATERTIGHT BULKHEAD DOORS
|
Class 1 doors; permissible locations.
|
|
|
Class 2 doors; permissible locations.
|
|
|
Class 3 doors; required locations.
|
|
|
Door design, operation, installation, and testing.
|
|
|
Special requirements for cargo space watertight doors.
|
|
Subpart I--FREE SURFACE
|
Free surface correction for intact stability calculations.
|
|
|
Free surface correction for damage stability calculations.
|
|
|
Special consideration for free surface of passive roll stabilization tanks.
|
|
|
Special consideration for free surface of spoil in hopper dredge hoppers.
|
|