47 C.F.R. § 80.207   Classes of emission.


Title 47 - Telecommunication


Title 47: Telecommunication
PART 80—STATIONS IN THE MARITIME SERVICES
Subpart E—General Technical Standards

Browse Previous |  Browse Next

§ 80.207   Classes of emission.

(a) Authorization to use radiotelephone and radiotelegraph emissions by ship and coast stations includes the use of digital selective calling and selective calling techniques in accordance with §80.225.

(b) In radiotelegraphy communications employing a modulated carrier the carrier must be keyed and modulated by an audio frequency.

(c) Authorization to use single sideband emission is limited to emitting a carrier;

(1) For full carrier transmitters at a power level between 3 and 6 dB below peak envelope power;

(2) For suppressed carrier transmitters at a power level at least 40 dB below peak envelope power; and

(3) For reduced or variable level carrier:

(i) In the 1600–4000 kHz band:

(A) For coast station transmitters 18±2 dB below peak envelope power;

(B) For ship station transmitters installed before January 2, 1982, 16±2 dB below peak envelope power; and

(C) For ship station transmitters installed after January 1, 1982, 18±2 dB below peak envelope power.

(ii) In the 4000–27500 kHz band:

(A) For coast station transmitters 18±2 dB below peak envelope power;

(B) For ship station transmitters installed before January 2, 1978, 16±2 dB below peak envelope power; and

(C) For ship station transmitters installed after January 1, 1978, 18±2 dB below peak envelope power.

(d) The authorized classes of emission are as follows:

 ------------------------------------------------------------------------           Types of stations                   Classes of emission------------------------------------------------------------------------           Ship Stations \1\Radiotelegraphy:    100-160 kHz........................  A1A    405-525 kHz........................  A1A, J2A    1605-27500 kHz:....................        Manual \15,16,17\..............  A1A, J2A, J2B, J2D        DSC \6\........................  F1B, J2B        NB-DP \14,16\..................  F1B, J2B, J2D        Facsimile......................  F1C, F3C, J2C, J3C    156-162 MHz \2\....................  F1B, F2B, F2C, F3C, F1D, F2D        DSC............................  G2B    216-220 MHz \3\....................  F1B, F2B, F2C, F3C    1626.5-1646.5 MHz..................  (\4\)Radiotelephony:    1605-27500 kHz \5,16\..............  H3E, J2D, J3E, R3E    27.5-470 MHz \6\...................  G3D, G3E    162.5-1646.5 MHz...................  (\4\)Radiodetermination:    285-325 kHz \7\....................  A1A, A2A    405-525 kHz (Direction Finding) \8\  A3N, H3N, J3N, NON    154-459 MHz \12\...................  A1D, A2D, F1D, F2D, G1D, G2D    2.4-9.5 GHz........................  PON    14.00-14.05 GHz....................  F3N           Land Stations \1\Radiotelegraphy:    100-160 kHz........................  A1A    405-525 kHz........................  A1A, J2A    1605-2850 kHz:        Manual.........................  A1A, J2A        Facsimile......................  F1C, F3C, J2C, J3C        Alaska_Fixed...................  A1A, J2A    4000-27500 kHz:        Manual \16\....................  A1A, J2A, J2B, J2D        DSC \18\.......................  F1B, J2B        NB-DP \14,18\..................  F1B, J2B, J2D        Facsimile......................  F1C, F3C, J2C, J3C        Alaska-Fixed\17,18\............  A1A, A2A, F1B, F2B, J2B, J2D    72-76 MHz \2,18\...................  A1A, A2A, F1B, F2B    156-162 MHz \2,20\.................  F1B, F2B, F2C, F3C, F1D, F2D        DSC............................  G2B    216-220 MHz \3\....................  F1B, F2B, F2C, F3CRadiotelephony:    1605-27500 kHz \18,19\.............  H3E, J3E, R3E    72-76 MHz..........................  A3E, F3E, G3E    156-470 MHz........................  G3ERadiodetermination:    2.4-9.6 GHz........................  PONDistress, Urgency and Safety \8,9\    2182 kHz \10,11\...................  A2B, A3B, H2B, H3E, J2B, J3E    121.500 MHz........................  A3E, A3X, N0N    123.100 MHz........................  A3E    156.750 and 156.800 MHz \13\.......  G3E, G3N    243.000 MHz........................  A3E, A3X, N0N    406.025 MHz........................  G1D------------------------------------------------------------------------\1\ Excludes distress, EPIRBs, survival craft, and automatic link  establishment.\2\ Frequencies used for public correspondence and in Alaska 156.425  MHz. See §§ 80.371(c), 80.373(f) and 80.385(b). Transmitters  approved before January 1, 1994, for G3E emissions will be authorized  indefinitely for F2C, F3C, F1D and F2D emissions. Transmitters  approved on or after January 1, 1994, will be authorized for F2C, F3C,  F1D or F2D emissions only if they are approved specifically for each  emission designator.\3\ Frequencies used in the Automated Maritime Telecommunications System  (AMTS). See § 80.385(b).\4\ Types of emission are determined by the INMARSAT Organization.\5\ Transmitters approved prior to December 31, 1969, for emission H3E,  J3E, and R3E and an authorized bandwidth of 3.5 kHz may continue to be  operated. These transmitters will not be authorized in new  installations.\6\ G3D emission must be used only by one-board stations for maneuvering  or navigation.\7\ Frequencies used for cable repair operations. See § 80.375(b).\8\ For direction finding requirements see § 80.375.\9\ Includes distress emissions used by ship, coast, EPIRBs and survival  craft stations.\10\ On 2182 kHz A1B, A2B, H2B and J2B emissions indicate transmission  of the auto alarm signals.\11\ Ships on domestic voyages must use J3E emission only.\12\ For frequencies 154.585 MHz, 159.480 MHz, 160.725 MHz, 160.785 MHz,  454.000 MHz and 459.000 MHz, authorized for offshore radiolocation and  related telecommand operations.\13\ Class C EPIRB stations may not be used after February 1, 1999.\14\ NB-DP operations which are not in accordance with CCIR  Recommendation 625 or 476 are permitted to utilize any modulation, so  long as emissions are within the limits set forth in § 80.211(f).\15\ J2B is permitted only on 2000-27500 kHz.\16\ J2D is permitted only on 2000-27500 kHz, and ship stations  employing J2D emissions shall at no time use a peak envelope power in  excess of 1.5 kW per channel.\17\ J2B and J2D are permitted provided they do not cause harmful  interference to A1A.\18\ Coast stations employing J2D emissions shall at no time use a peak  envelope power in excess of 10 kW per channel.\19\ J2D is permitted only on 2000-27500 kHz.\20\ If a station uses another type of digital emission, it must comply  with the emission mask requirements of § 90.210 of this Chapter,  except that Automatic Identification System (AIS) transmissions do not  have to comply with the emission mask requirements of § 90.210 of  this Chapter.

[51 FR 31213, Sept. 2, 1986; 51 FR 34984, Oct. 1, 1986; as amended at 52 FR 7418, Mar. 11, 1987; 52 FR 35244, Sept. 18, 1987; 53 FR 8905, Mar. 18, 1988; 53 FR 37308, Sept. 26, 1988; 54 FR 40058, Sept. 29, 1989; 54 FR 49993, Dec. 4, 1989; 56 FR 11516, Mar. 19, 1991; 57 FR 43407, Sept. 21, 1992; 58 FR 33344, June 17, 1993; 62 FR 40305, July 28, 1997; 63 FR 36606, July 7, 1998; 67 FR 48564, July 25, 2002; 68 FR 46963, Aug. 7, 2003; 69 FR 64672, Nov. 8, 2004]

Browse Previous |  Browse Next

chanrobles.com