Title 46: Shipping
PART 54—PRESSURE VESSELS
Subpart 54.01—General Requirements
Browse Next
§ 54.01-1 Incorporation by reference.
(a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a). To enforce any edition other than that specified in paragraph (b) of this section, the Coast Guard must publish notice of change in the Federal Register and make the material available to the public. All approved material is on file at the U.S. Coast Guard, Office of Design and Engineering Standards (G-MSE), 2100 Second Street SW., Washington, DC 20593–0001 and is available from the sources indicated in paragraph (b) of this section or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202–741–6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.php.
(b) The material approved for incorporation by reference in this part and the sections affected are:
American Society of Mechanical Engineers (ASME) International
Three Park Avenue, New York, NY 10016–5990
Boiler and Pressure Vessel Code, section VIII, Division 1, Pressure Vessels, July 1989 with 1989 addenda 54.01–2; 54.01–5; 54.01–15; 54.01–18; 54.01–25; 54.01–30; 54.01–35; 54.03–1; 54.03–5; 54.05–1; 54.10–1; 54.10–3; 54.10–5; 54.10–10; 54.10–15; 54.15–1; 54.15–5; 54.15–10; 54.15–13; 54.20–1; 54.20–3; 54.25–1; 54.25–3; 54.25–5; 54.25–8; 54.25–10; 54.25–15; 54.25–20; 54.25–25; 54.30–3; 54.30–5; 54.30–10
American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959.
ASTM A 20/A 20M–97a, Standard Specification for General Requirements for Steel Plates for Pressure Vessels54.05–10; 54.25–10ASTM A 203/A 203M–97, Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel54.05–20ASTM A 370–97a, Standard Test Methods and Definitions for Mechanical Testing of Steel Products54.25–20ASTM E 23–96, Standard Test Methods for Notched Bar Impact Testing of Metallic Materials54.05–5ASTM E 208–95a, Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels54.05–5
Compressed Gas Association (CGA)
500 Fifth Avenue, New York, NY 10036
S–1.2, Safety Relief Device Standards—Cargo and Portable Tanks for Compressed Gases, 1979 54.15–25S–1.2.5.2, Flow Test of Safety Relief Valves, 197954.15–10
Manufacturers Standardization Society (MSS)
127 Park Street, NE. Vienna, VA 22180
SP–25, Standard Marking System for Valves, Fittings, Flanges and Unions, 1978 54.01–25
[CGD 88–032, 56 FR 35822, July 29, 1991 as amended by CGD 95–072, 60 FR 50462, Sept. 29, 1995; CGD 95–027, 61 FR 26000, May 23, 1996; CGD 96–041, 61 FR 50727, Sept. 27, 1996; CGD 97–057, 62 FR 51044, Sept. 30, 1997; USCG–1999–6216, 64 FR 53224, Oct. 1, 1999; USCG–1999–5151, 64 FR 67177, Dec. 1, 1999; USCG–2002–13058, 67 FR 61278, Sept. 30, 2002]
